UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
Abiester 90 Spolchemie Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks.
Abifen 125 D Spolchemie Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...voir plus Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. voir moins
Abimal 125 Spolchemie Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...voir plus Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. voir moins
Acronal® 4032 X BASF Dispersions & Resins Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels.
Acronal® 4053 X BASF Dispersions & Resins Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending.
Acronal® A 110 BASF Dispersions & Resins Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins
Acronal® A 145 BASF Dispersions & Resins Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 220 na BASF Dispersions & Resins Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® A 240 na BASF Dispersions & Resins Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 310 S BASF Dispersions & Resins Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film...voir plus Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film lamination. It adheres well to suitably treated olefinic surfaces. Polyolefin film should always be given a corona discharge treatment before applying adhesives. If PVC films are laminated, any plasticizer they may contain can migrate into the adhesive layer and weaken the bond. Adhesives made from Acronal® A 310 S crosslink at room temperature once they have dried. This results in an increase in cohesion, which gives laminating adhesives good resistance to piping. voir moins
Acronal® DS 3502 BASF Dispersions & Resins Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins
Acronal® DS 3570 na BASF Dispersions & Resins Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins
Acronal® DS 3598 na BASF Dispersions & Resins Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® N 284 na BASF Dispersions & Resins Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins
Acronal® NX 2160 BASF Dispersions & Resins Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins
Acronal® NX 2278 X BASF Dispersions & Resins Acronal® NX 2278 X is an acrylic dispersion polymer with excellent removability for film label applications. It also offers good plasticizer resistance, high shear, and self-crosslinking benefits.
Acronal® NX 4021 BASF Dispersions & Resins Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability.
Acronal® NX 4569 BASF Dispersions & Resins Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins
Acronal® NX 5818 BASF Dispersions & Resins Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins
Acronal® V 210 na BASF Dispersions & Resins Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia.
Acronal® V 275 na BASF Dispersions & Resins Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free.
Basonat® F 200 WD BASF Dispersions & Resins Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins
Basonat® HW 100 BASF Dispersions & Resins Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of a...voir plus Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of about 10 parts Basonat HW 100 to 100 parts dispersion (solids on solids) will suffice. However, the best mixing ratio for a particular formulation is usually found empirically. The polyisocyanate is easier to distribute if it is first dissolved with 10 - 20% of the solvent that is used as a film-forming agent for the polymer dispersion. voir moins
Basonat® LR 9056 BASF Dispersions & Resins Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins
Butofan® NS 144 BASF Dispersions & Resins Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 166 BASF Dispersions & Resins Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 209 BASF Dispersions & Resins Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins
Butofan® NS 222 BASF Dispersions & Resins Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO.
Butonal® NS 175 BASF Dispersions & Resins Butonal® NS 175 is an anionic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It is non-APEO and non-ammonia.
CHS-Alkyd AKS 281 X 60 Spolchemie CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...voir plus CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. voir moins
CHS-Alkyd AL 2900 Spolchemie CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...voir plus CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. voir moins
CHS-Alkyd AL 3220 Spolchemie CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...voir plus CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. voir moins
CHS-Alkyd AL 3701 Spolchemie CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...voir plus CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. voir moins
CHS-Alkyd AL 3961 Spolchemie CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...voir plus CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. voir moins
CHS-Alkyd AL 3964 Spolchemie CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...voir plus CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. voir moins
CHS-Alkyd C 351 E 75 Spolchemie CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...voir plus CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. voir moins
CHS-Alkyd C 351 X 60 Spolchemie CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...voir plus CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. voir moins
CHS-Alkyd LUR 740 NN 80 Spolchemie CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....voir plus CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. voir moins
CHS-Alkyd M 552 WX 60 Spolchemie CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...voir plus CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. voir moins
CHS-Alkyd S 401 X 55 Spolchemie CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...voir plus CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. voir moins
CHS-Alkyd S 401 X 60 Spolchemie CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...voir plus CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. voir moins
CHS-Alkyd S 471 WX 55 Spolchemie CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...voir plus CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. voir moins
CHS-Alkyd S 471 X 60 Spolchemie CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...voir plus CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. voir moins
CHS-Alkyd S 491 W 55 Spolchemie CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...voir plus CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. voir moins
CHS-Alkyd S 491 WB 55 Spolchemie CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...voir plus CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. voir moins
CHS-Alkyd S 618 W 80 Spolchemie CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...voir plus CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. voir moins
CHS-Alkyd S 621 W 60 Spolchemie CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...voir plus CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. voir moins
CHS-Alkyd S 622 N 60 Spolchemie CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...voir plus CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. voir moins
CHS-Alkyd S 622 W 55 Spolchemie CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...voir plus CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. voir moins
CHS-Alkyd S 623 NN 50 Spolchemie CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher...voir plus CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. voir moins
CHS-Alkyd S 623 NN 60 Spolchemie CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher...voir plus CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. voir moins
CHS-Alkyd S 652 NN 70 Spolchemie CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...voir plus CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. voir moins
CHS-Alkyd S 653 W 70 Spolchemie CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...voir plus CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. voir moins
CHS-Alkyd S 670 NN 75 Spolchemie CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...voir plus CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. voir moins
CHS-Alkyd ST 551 N 50 Spolchemie CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...voir plus CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. voir moins
CHS-Alkyd SU 621 N 50 Spolchemie CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...voir plus CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. voir moins
CHS-Alkyd SU 632 N 60 Spolchemie CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...voir plus CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. voir moins
CHS-Alkyd SU 671 W 60 Spolchemie CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is ...voir plus CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is primarily used for fast air-drying coatings for interior and exterior applications. voir moins
CHS-Alkyd SUR 735 NN 80 Spolchemie CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....voir plus CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. voir moins
CHS-Alkyd T 501 WX 55 Spolchemie CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating ...voir plus CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating all purpose coatings to improve weathering and UV resistance, due to its low yellowing tendency. voir moins
CHS-Alkyd TI 870 Spolchemie CHS-Alkyd TI 870 is a long oiled alkyd binder for high solid coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 87%. CHS-Alkyd TI 870 ...voir plus CHS-Alkyd TI 870 is a long oiled alkyd binder for high solid coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 87%. CHS-Alkyd TI 870 is primarily used for economical coatings for wood and metal surfaces. It also is used as a binder for printing inks and pigment pastes. voir moins
CHS-Alkyd TRI 841 Spolchemie CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...voir plus CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. voir moins
CHS-Alkyd TU 341 X 60 Spolchemie CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...voir plus CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. voir moins
CHS-Alkyd TU 497 X 55 Spolchemie CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...voir plus CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. voir moins
CHS-Alkyd Trim 551 W 85 Spolchemie CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...voir plus CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. voir moins
CHS-Epoxy 030 Spolchemie CHS-Epoxy 030 is a high molecular weighted solid epoxy resin. This is a type 9 solid epoxy resin with epoxide equivalent weight (EEW) range between 2220-4000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
CHS-Epoxy 050 Spolchemie CHS-Epoxy 050 is a high molecular weighted solid epoxy resin. This is a type 7 solid epoxy resin with epoxide equivalent weight (EEW) range between 1550-2000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
CHS-Epoxy 070 Spolchemie CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can ...voir plus CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings. voir moins
CHS-Epoxy 101 X 60 Spolchemie CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination w...voir plus CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination with melamine-formaldehyde resins. voir moins
CHS-Epoxy 112 Spolchemie CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, ...voir plus CHS-Epoxy 112 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 4 solid epoxy resin with epoxide equivalent weight (EEW) range between 900-1050 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins
CHS-Epoxy 112 4F0,5 Spolchemie CHS-Epoxy 112 4F0,5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 900-950 g/mol. This product is a mixture compromising 99.5% CHS-Epoxy 112 and .5% of a flow cont...voir plus CHS-Epoxy 112 4F0,5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 900-950 g/mol. This product is a mixture compromising 99.5% CHS-Epoxy 112 and .5% of a flow control agent. CHS-Epoxy 1124F0.5 is primarily used for producing epoxy powder coatings. voir moins
CHS-Epoxy 112 4F5 Spolchemie CHS-Epoxy 112 4F5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 910-1110 g/mol. This product is a mixture compromising 95% CHS-Epoxy 112 and 5% of a flow control ...voir plus CHS-Epoxy 112 4F5 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and it’s epoxide equivalent weight (EEW) range is between 910-1110 g/mol. This product is a mixture compromising 95% CHS-Epoxy 112 and 5% of a flow control agent. CHS-Epoxy 112 4F5 is primarily used for producing epoxy powder coatings. voir moins
CHS-Epoxy 121 Spolchemie CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters,...voir plus CHS-Epoxy 121 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 800-900 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution voir moins
CHS-Epoxy 130 Spolchemie CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, p...voir plus CHS-Epoxy 130 is a clear colored medium molecular weighted unmodified solid epoxy resin. This is a type 3 solid epoxy resin with epoxide equivalent weight (EEW) range between 700-800 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins
CHS-Epoxy 130 4F10 Spolchemie CHS-Epoxy 130 4F10 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and its epoxide equivalent weight (EEW) range is between 770-910 g/mol. This product is a mixture compromising 90% CHS-Epoxy 130 and 10% of a flow control ...voir plus CHS-Epoxy 130 4F10 is a modified solid epoxy resin. This epoxy resin has a medium molecular weight, and its epoxide equivalent weight (EEW) range is between 770-910 g/mol. This product is a mixture compromising 90% CHS-Epoxy 130 and 10% of a flow control agent. CHS-Epoxy 130 4F10 is primarily used for producing epoxy powder coatings. voir moins
CHS-Epoxy 141 Spolchemie CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, po...voir plus CHS-Epoxy 141 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 650-700 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins
CHS-Epoxy 141 4F5 Spolchemie CHS-Epoxy 141 4F5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 690-770 g/mol. This product is a mixture compromising 95% CHS-Epoxy 141 and 5% of a flow control agent...voir plus CHS-Epoxy 141 4F5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 690-770 g/mol. This product is a mixture compromising 95% CHS-Epoxy 141 and 5% of a flow control agent. CHS-Epoxy 141 4F5 is primarily used for producing epoxy powder coatings. voir moins
CHS-Epoxy 160 Spolchemie CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powd...voir plus CHS-Epoxy 160 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 2 solid epoxy resin with epoxide equivalent weight (EEW) range between 600-650 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins
CHS-Epoxy 160 4F2.5 Spolchemie CHS-Epoxy 160 4F2.5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 590-670 g/mol. This product is a mixture compromising 97.5% CHS-Epoxy 160 and 2.5% of a flow control...voir plus CHS-Epoxy 160 4F2.5 is a modified solid epoxy resin. This epoxy resin has a low molecular weight, and its epoxide equivalent weight (EEW) range is between 590-670 g/mol. This product is a mixture compromising 97.5% CHS-Epoxy 160 and 2.5% of a flow control agent. CHS-Epoxy 160 4F2.5 is primarily used for producing epoxy powder coatings. voir moins
CHS-Epoxy 160 V 55 Spolchemie CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied ...voir plus CHS-Epoxy 160 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a VOC free water dispersed epoxy resin system that is medium in its molecular weight. The primary use for CHS-Epoxy 160 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 1040. voir moins
CHS-Epoxy 171 Spolchemie CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, po...voir plus CHS-Epoxy 171 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1.5 solid epoxy resin with epoxide equivalent weight (EEW) range between 550-600 g/mol. This product is primarily used for manufacture of epoxy esters, powder coatings or directly as a lacquer solution. voir moins
CHS-Epoxy 200 M 75 Spolchemie CHS-Epoxy 200 M 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in methyl ethyl ketone (MEK) and its epoxide equivalent weight (EEW) range is 435-525 g/mol. This product is primarily used for production of la...voir plus CHS-Epoxy 200 M 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in methyl ethyl ketone (MEK) and its epoxide equivalent weight (EEW) range is 435-525 g/mol. This product is primarily used for production of laminates and mica insulators in electrical engineering industry. voir moins
CHS-Epoxy 200 V 55 Spolchemie CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to ...voir plus CHS-Epoxy 200 V 55 is a milky-white colored liquid with medium viscosity that is 100% dilutable. This product is a low molecular weighted epoxy resin. It is classified as an epoxy resin for waterborne systems. The primary use for CHS-Epoxy 200 V 55 is to be applied as a varnish and a binder of paints for wood, concrete and metal surfaces in combination with curing agent Telalit 180. voir moins
CHS-Epoxy 210 X 75 Spolchemie CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance t...voir plus CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primers, baking coating, paints for heating oil tanks, penetrates of concrete, treatment of wood and metal surfaces. voir moins
CHS-Epoxy 211 Spolchemie CHS-Epoxy 211 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1 solid epoxy resin with epoxide equivalent weight (EEW) range between 450-550 g/mol. This product is primarily used for producing high performance powder...voir plus CHS-Epoxy 211 is a clear colored low molecular weighted unmodified solid epoxy resin. This is a type 1 solid epoxy resin with epoxide equivalent weight (EEW) range between 450-550 g/mol. This product is primarily used for producing high performance powder coatings and solvent borne coatings. voir moins
CHS-Epoxy 222 IX 60 Spolchemie CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It come...voir plus CHS-Epoxy 222 IX 60 is a Gardner colored solution of a modified low molecular weight epoxy resin. This low molecular weighted epoxy resin has an epoxide equivalent weight of 430-555 g/mol. CHS-Epoxy 222 is modified by soy bean oil and fatty acids. It comes from a solution that is 60% in a blend of solvents including isobutanol and xylene. This product is primarily used for producing anticorrosion paints for marine, railway, gas industries. This product can also be used for wood floor toppings and different metal surfaces exclusively intended for interior use. voir moins
CHS-Epoxy 301 Spolchemie CHS-Epoxy 301 is a medium molecular weighted, semi-solid epoxy resin based on BPA. This product is primarily used for hot casting applications in several different areas of industry; this is including the electrical industry. It is also used in solvent bo...voir plus CHS-Epoxy 301 is a medium molecular weighted, semi-solid epoxy resin based on BPA. This product is primarily used for hot casting applications in several different areas of industry; this is including the electrical industry. It is also used in solvent borne coatings. voir moins
CHS-Epoxy 324 Spolchemie CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambi...voir plus CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient temperature. CHS-Epoxy 324 is primarily used as a bonding agent for adhesive and construction sealants. voir moins
CHS-Epoxy 381 X 90 Spolchemie CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid pain...voir plus CHS-Epoxy 381 X 90 is a solution of a modified low molecular weighted epoxy. It is a flexible liquid epoxy resin based on BPA. This product comes from 90 percent xylene solution. The primary use for this product is to be used for producing high-solid paints and manufacture of anticorrosive coatings and enamels. voir moins
CHS-Epoxy 411 Spolchemie CHS-Epoxy 411 is a semi-solid epoxy resin based on BPA. This product is primarily used for hot casting applications, in several different areas of industry; this is including the electrical industry. This product is also used for producing solvent borne c...voir plus CHS-Epoxy 411 is a semi-solid epoxy resin based on BPA. This product is primarily used for hot casting applications, in several different areas of industry; this is including the electrical industry. This product is also used for producing solvent borne coatings and pre impregnations. voir moins
CHS-Epoxy 455 Spolchemie CHS-Epoxy 455 is a low molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient...voir plus CHS-Epoxy 455 is a low molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient temperature. CHS-Epoxy 455 is primarily used for modifying, saturating, condensing and preserving and in particular, electrical, electronic, building and civil engineering. voir moins
CHS-Epoxy 474 Spolchemie CHS-Epoxy 474 is a modified liquid epoxy resin that has a low molecular weight. This product id modified by a mono-functional reactive solvent and non-reactive diluent. CHS-Epoxy 474 is primarily used for adhesives, mixtures, coatings and civil engineer a...voir plus CHS-Epoxy 474 is a modified liquid epoxy resin that has a low molecular weight. This product id modified by a mono-functional reactive solvent and non-reactive diluent. CHS-Epoxy 474 is primarily used for adhesives, mixtures, coatings and civil engineer applications. When applied this epoxy must have the correct curing agent Telalit 0492 intended to be the bonding agent. voir moins
CHS-Epoxy 498 Spolchemie CHS-Epoxy 498 is a modified liquid epoxy resin that has a low molecular weight. This product is modified by a mono-functional reactive diluent. CHS-Epoxy 498 is the lower viscous version of CHS-Epoxy 521. This product has several different uses but is pri...voir plus CHS-Epoxy 498 is a modified liquid epoxy resin that has a low molecular weight. This product is modified by a mono-functional reactive diluent. CHS-Epoxy 498 is the lower viscous version of CHS-Epoxy 521. This product has several different uses but is primarily used for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling floorings. voir moins
CHS-Epoxy 501 Spolchemie CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints...voir plus CHS-Epoxy 501 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 501 is primarily used for adhesives, composites, casting, anticorrosion paints. voir moins
CHS-Epoxy 508 Spolchemie CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher...voir plus CHS-Epoxy 508 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a mono-functional reactive diluent. It is also able to cure at ambient or elevated temperature levels. CHS-Epoxy 508 is the higher viscous version of CHS-Epoxy 521. The primary use of CHS-Epoxy 508 is for potting, bonding agents, laminating, producing casting compounds, polymer concrete and self-levelling flooring. voir moins
CHS-Epoxy 510 Spolchemie CHS-Epoxy 510 is a universal low molecular weight epoxy resin based on BPA. This product is a non-modified liquid with a very low crystallization tendency. CHS-Epoxy 510 can be cured at two different levels of ambient or elevated. The primary use for this...voir plus CHS-Epoxy 510 is a universal low molecular weight epoxy resin based on BPA. This product is a non-modified liquid with a very low crystallization tendency. CHS-Epoxy 510 can be cured at two different levels of ambient or elevated. The primary use for this product is to modify, impregnate, encapsulate and potting operations. voir moins
CHS-Epoxy 512 Spolchemie CHS-Epoxy 512 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a non-reactive modifier. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agen...voir plus CHS-Epoxy 512 is a modified liquid epoxy resin that has a low molecular weight. This epoxy resin product is modified through a non-reactive modifier. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent. The primary use for CHS-Epoxy 512 is for flooring, polymer mortars, polymer concrete, and certain applications for the electrical industry. voir moins
CHS-Epoxy 514 Spolchemie CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints...voir plus CHS-Epoxy 514 is a clear colored low molecular weighted modified solid epoxy resin based on BPA and BPF. This product is modified by a nonfunctional reactive diluent. CHS-Epoxy 514 is primarily used for adhesives, composites, casting, anticorrosion paints. voir moins
CHS-Epoxy 517 Spolchemie CHS-Epoxy 517 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product is modified through a non-epoxy type reactive diluent. It has the ability to cure at either an ambient or elevated temperature level with the proper curin...voir plus CHS-Epoxy 517 is a modified liquid epoxy resin with a low molecular weight. This epoxy resin product is modified through a non-epoxy type reactive diluent. It has the ability to cure at either an ambient or elevated temperature level with the proper curing agent. CHS-Epoxy 517 primary use is for polymer mortars, polymer concretes and flooring. voir moins
CHS-Epoxy 520 Spolchemie CHS-Epoxy 520 is a universal low molecular weight epoxy resin based on BPA. This product is a resin that has no modifiers and can cure at two different levels at either an elevated or ambient temperature. CHS-Epoxy 520 is primarily used for modifying, sat...voir plus CHS-Epoxy 520 is a universal low molecular weight epoxy resin based on BPA. This product is a resin that has no modifiers and can cure at two different levels at either an elevated or ambient temperature. CHS-Epoxy 520 is primarily used for modifying, saturating, condensing and preserving operations in different areas of industry. voir moins