UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
Acronal® 4032 X BASF Dispersions & Resins Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels.
Acronal® 4053 X BASF Dispersions & Resins Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending.
Acronal® A 110 BASF Dispersions & Resins Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins
Acronal® A 145 BASF Dispersions & Resins Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 220 na BASF Dispersions & Resins Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® A 240 na BASF Dispersions & Resins Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 310 S BASF Dispersions & Resins Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film...voir plus Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film lamination. It adheres well to suitably treated olefinic surfaces. Polyolefin film should always be given a corona discharge treatment before applying adhesives. If PVC films are laminated, any plasticizer they may contain can migrate into the adhesive layer and weaken the bond. Adhesives made from Acronal® A 310 S crosslink at room temperature once they have dried. This results in an increase in cohesion, which gives laminating adhesives good resistance to piping. voir moins
Acronal® DS 3502 BASF Dispersions & Resins Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins
Acronal® DS 3570 na BASF Dispersions & Resins Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins
Acronal® DS 3598 na BASF Dispersions & Resins Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® N 284 na BASF Dispersions & Resins Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins
Acronal® NX 2160 BASF Dispersions & Resins Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins
Acronal® NX 2278 X BASF Dispersions & Resins Acronal® NX 2278 X is an acrylic dispersion polymer with excellent removability for film label applications. It also offers good plasticizer resistance, high shear, and self-crosslinking benefits.
Acronal® NX 4021 BASF Dispersions & Resins Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability.
Acronal® NX 4569 BASF Dispersions & Resins Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins
Acronal® NX 5818 BASF Dispersions & Resins Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins
Acronal® V 210 na BASF Dispersions & Resins Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia.
Acronal® V 275 na BASF Dispersions & Resins Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free.
BYK®-012 Byk BYK®-012 is a mineral oil and silicone free defoamer for aqueous VOC-free adhesives and sealants.
BYK®-016 Byk BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants.
BYK®-022 Byk Silicone defoamer for aqueous adhesives and sealants.
BYK®-023 Byk Silicone defoamer for aqueous adhesives and sealants.
BYK®-024 Byk Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-025 Byk Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-028 Byk Silicone defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-035 Byk BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces.
BYK®-037 Byk BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient.
BYK®-038 Byk BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...voir plus BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. voir moins
BYK®-065 Byk Silicone defoamer for solvent-borne and solvent-free adhesives and sealants. The additive is recommended for PUR systems and can also be used in epoxy systems.
BYK®-066 N Byk Silicone defoamer for solvent-borne and solvent-free adhesives and sealants. The additive is recommended for PUR systems and can also be used in epoxy systems.
BYK®-067 A Byk Silicone defoamer for solvent-borne and solvent-free adhesives and sealants. The additive is recommended for PUR systems and can also be used in epoxy systems.
BYK®-077 Byk BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when reco...voir plus BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated. voir moins
BYK®-085 Byk Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exist...voir plus Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists.  voir moins
BYK®-088 Byk Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems.
BYK®-093 Byk High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty.
BYK®-1610 Byk BYK®-1610 is a defoamer for emulsion-based adhesives and sealants.
BYK®-1615 Byk BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions.
BYK®-3400 Byk BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-3410 Byk BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-345 Byk BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...voir plus BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. voir moins
BYK®-346 Byk BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...voir plus BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. voir moins
BYK®-347 Byk BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...voir plus BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. voir moins
BYK®-348 Byk BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...voir plus BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. voir moins
BYK®-349 Byk BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...voir plus BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. voir moins
BYK®-410 Byk Liquid rheologoical additive for solvent-based and solvent-free coatings. After incorporation it builds up pseudoplasticity within the system. The thixotropic flow behavior prevents settling and sagging. Due to its liquid form the additive is easy to hand...voir plus Liquid rheologoical additive for solvent-based and solvent-free coatings. After incorporation it builds up pseudoplasticity within the system. The thixotropic flow behavior prevents settling and sagging. Due to its liquid form the additive is easy to handle; it can even be used as a post-additive. The additive requires no special temperature control during incorporation. voir moins
BYK®-411 Byk BYK®-411 is a liquid rheological additive (also for post-addition into solvent-borne and solvent-free systems). It is a solution of a modified urea. These additives are preferably used to adjust rheology in low-polar, solvent-borne and solvent-free system...voir plus BYK®-411 is a liquid rheological additive (also for post-addition into solvent-borne and solvent-free systems). It is a solution of a modified urea. These additives are preferably used to adjust rheology in low-polar, solvent-borne and solvent-free systems. This product creates pseudo-plastic, thixotropic flow behavior in the low shear range, and has accordingly no impact on the overall application behavior of the coating. voir moins
BYK®-420 Byk BYK®-420 is a solution of a modified urea. BYK-420 has proven to be efficient for universal application in aqueous systems and pigment concentrates. As a result of varying regional labeling obligations for NMP (N-Methylpyrrolidone), the additives are avai...voir plus BYK®-420 is a solution of a modified urea. BYK-420 has proven to be efficient for universal application in aqueous systems and pigment concentrates. As a result of varying regional labeling obligations for NMP (N-Methylpyrrolidone), the additives are available alternatively as solutions in NEP (N-Ethylpyrroldione) and DMSO (Dimethylsulfoxide). voir moins
BYK®-425 Byk BYK®-425 is a rheological additive for aqueous and water soluble systems. It is a solution of an urea modified polyurethane. The additive is designed for adjusting the low shear viscosity of aqueous and water soluble resin systems providing pseudoplastic ...voir plus BYK®-425 is a rheological additive for aqueous and water soluble systems. It is a solution of an urea modified polyurethane. The additive is designed for adjusting the low shear viscosity of aqueous and water soluble resin systems providing pseudoplastic flow behavior. Due to its high effectiveness BYK-425 is also suitable to increase in-can viscosity and to adjust flow properties of pigment pastes. The viscosity increase improves the sag resistance. voir moins
BYK®-430 Byk BYK®-430 is a liquid rheology control additive for solvent borne systems. It is a solution of a high molecular urea modified medium polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interactio...voir plus BYK®-430 is a liquid rheology control additive for solvent borne systems. It is a solution of a high molecular urea modified medium polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interaction with the pigments and extenders. The resulting pseudoplastic flow characteristic is the result of the entanglement of high molecular weight polymers. The polarity of the coating system as well as the incorporation temperature will have an effect on the final rheology. voir moins
BYK®-431 Byk BYK®-431 is a liquid rheology control additive for solvent-borne systems. It is a solution of a high molecular urea modified non polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interaction w...voir plus BYK®-431 is a liquid rheology control additive for solvent-borne systems. It is a solution of a high molecular urea modified non polar polyamide. BYK-430 and BYK-431 build a three-dimensional structured network based on hydrogen bondings and interaction with the pigments and extenders. The resulting pseudoplastic flow characteristic is the result of the entanglement of high molecular weight polymers. The polarity of the coating system as well as the incorporation temperature will have an effect on the final rheology. voir moins
BYK®-9076 Byk BYK®-9076 is a high molecular weight additive for solvent-free adhesives and sealants BYK®-9076 is especially useful for the stabilization of acidic and neutral types of carbon black.
BYK®-9077 Byk BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mil...voir plus BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mill-base. BYK-9077 is especially suited for stabilizing basic carbon black pigments. The product does not contain plasticizers. voir moins
BYK®-A 515 Byk BYK®-A 515 is a highly surface active air release additive often used in acrylic systems to prevent air entrapment.
BYK®-A 530 Byk Air release agent and defoamer for solvent-based and solvent-free epoxy systems.
BYK®-A 535 Byk Silicone-free defoamer / air release additive for solvent-free and solvent-borne epoxy and PUR-based adhesives and sealants.
BYK®-A 550 Byk BYK®-A 550 shows a strong air release effect without creating a strong haziness effect.
BYK®-A 555 Byk BYK®-A 555 shows the highest efficiency in various adhesive applications.
BYK®-DYNWET 800 Byk BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting.
BYK®-W 940 Byk BYK®-W 940 prevents sedimentation of mineral fillers such as calcium carbonate and aluminium trihydroxide and minimizes flooding and floating when organic and inorganic pigments are used.
BYK®-W 961 Byk BYK®-W 961 is used as a wetting and dispersing additive for mineral fillers to prevent sedimentation.
BYK®-W 966 Byk BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentati...voir plus BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentation. voir moins
BYK®-W 969 Byk BYK®-W 969 is used as a wetting and dispersing additive with viscosity reducing properties for adhesives and sealants.
BYK®-W 980 Byk BYK®-W 980 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide. It reduces the viscosity, so that a higher filler loading is possible and helps to prevent sedimentation.
BYK®-W 985 Byk BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedim...voir plus BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedimentation. voir moins
Basonat® F 200 WD BASF Dispersions & Resins Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins
Basonat® HW 100 BASF Dispersions & Resins Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of a...voir plus Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of about 10 parts Basonat HW 100 to 100 parts dispersion (solids on solids) will suffice. However, the best mixing ratio for a particular formulation is usually found empirically. The polyisocyanate is easier to distribute if it is first dissolved with 10 - 20% of the solvent that is used as a film-forming agent for the polymer dispersion. voir moins
Basonat® LR 9056 BASF Dispersions & Resins Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins
Butofan® NS 144 BASF Dispersions & Resins Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 166 BASF Dispersions & Resins Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 209 BASF Dispersions & Resins Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins
Butofan® NS 222 BASF Dispersions & Resins Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO.
Butonal® NS 175 BASF Dispersions & Resins Butonal® NS 175 is an anionic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It is non-APEO and non-ammonia.
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
Claytone® 40 Byk Claytone® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...voir plus Claytone® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. voir moins
Claytone® AF Byk Claytone® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. Claytone® AF produces reproducible viscosity and thixotropic development, a hig...voir plus Claytone® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. Claytone® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. Claytone® AF is self dispersing and does not require a polar activator. Claytone® AF eliminates the need for high shear or pregels. voir moins
Claytone® APA Byk Claytone® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. Claytone® APA demonstrates high gelling efficiency, reproducible viscosity and ...voir plus Claytone® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. Claytone® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. voir moins
Claytone® HT Byk Claytone® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. Claytone® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a...voir plus Claytone® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. Claytone® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings. voir moins
Claytone® HY Byk Claytone® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. Claytone® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting ...voir plus Claytone® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. Claytone® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity. voir moins
DISPERBYK®-118 Byk DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...voir plus DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. voir moins
DISPERBYK®-180 Byk Wetting and dispersing additive for aqueous, solvent-based and solvent-free adhesives and sealants.
DISPERBYK®-190 Byk Wetting and dispersing additive for aqueous adhesives and sealants.
DISPERBYK®-191 Byk Wetting and dispersing additive for aqueous adhesives and sealants.
DISPERBYK®-192 Byk Wetting and dispersing additive for aqueous adhesives and sealants.
Epotal® P100 ECO BASF Dispersions & Resins Epotal® P100 ECO is an aqueous dispersion of a polyester-polyurethane elastomer. It is particularly suited for the production of multi-layer films based on a broad variety of compostable films and paper. The laminate has a high initial bond strength enabl...voir plus Epotal® P100 ECO is an aqueous dispersion of a polyester-polyurethane elastomer. It is particularly suited for the production of multi-layer films based on a broad variety of compostable films and paper. The laminate has a high initial bond strength enabling direct further converting. voir moins
GARAMITE® 1210 Byk GARAMITE® 1210 is a unique rheological additive developed for vinyl ester and unsaturated polyester systems. It is recommended for use in unsaturated polyester resins such as Orthophthalic, Isophthalic, DCPD and PET resins. Compared to fumed silica, this ...voir plus GARAMITE® 1210 is a unique rheological additive developed for vinyl ester and unsaturated polyester systems. It is recommended for use in unsaturated polyester resins such as Orthophthalic, Isophthalic, DCPD and PET resins. Compared to fumed silica, this product provides improved sag (drainage) resistance, rheology control and stability, is more efficient, and is easier to handle in manufacturing (less dusty, higher bulk density and not sensitive to shear). voir moins
GARAMITE® 7303 Byk GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, ty...voir plus GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7303 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. voir moins
GARAMITE® 7305 Byk GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typica...voir plus GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7305 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. It is most suited for medium to high polarity systems. voir moins
Irgastab® UV 22 BASF Dispersions & Resins Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
LX®-1035 Resin Neville Chemical Company LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.
LX®-2161 Resin Neville Chemical Company LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins
LX®-238 Resin Neville Chemical Company LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins
Laponite® RD Byk Laponite® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...voir plus Laponite® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. voir moins
Laponite® RDS Byk Laponite® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will r...voir plus Laponite® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. voir moins
Laponite® S482 Byk Laponite® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remai...voir plus Laponite® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins
Laponite® SL25 Byk Laponite® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, Laponite® SL25 is a translucent and colourless low viscosity liquid dispersion. On additi...voir plus Laponite® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, Laponite® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins