| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Hanwha 2-EH (2-Ethyl-1-Hexanol) | Hanwha Chemical Corporation | Hanwha 2-EH is an colorless, transparent liquid made of 2-Ethyl-1-Hexanol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha CP-430 | Hanwha Chemical Corporation | Hanwha CP-430 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-430 is well suited for use in the production of Gravure inks, adhesives and paints. | |
| Hanwha CP-450 | Hanwha Chemical Corporation | Hanwha CP-450 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-450 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha DIDP (Diisodecyl Phthalate) | Hanwha Chemical Corporation | Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...voir plus Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. voir moins | |
| Hanwha DINP (Diisononyl Phthalate) | Hanwha Chemical Corporation | Hanwha DINP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...voir plus Hanwha DINP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. voir moins | |
| Hanwha DOP (Dioctyl Phthalate) | Hanwha Chemical Corporation | Hanwha DOP is a transparent plasticizer made of Dioctyl Phthalate with excellent viscosity and outstanding compatibility with other resins. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring mat...voir plus Hanwha DOP is a transparent plasticizer made of Dioctyl Phthalate with excellent viscosity and outstanding compatibility with other resins. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. voir moins | |
| Hanwha EL-102 | Hanwha Chemical Corporation | Hanwha EL-102 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding foaming and whitening properties. It is well suited for the use in producing eco-friendly wallpapers and foaming products for high speed coatings. | |
| Hanwha EL-103 | Hanwha Chemical Corporation | Hanwha EL-103 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding foaming and whitening properties. It is well suited for the use in producing eco-friendly wallpapers and foaming products for high speed coatings. | |
| Hanwha EM-2070 | Hanwha Chemical Corporation | Hanwha EM-2070 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with a low degree of sedimentation. It is well suited for the use in producing tarpulins, flooring products and for high speed coatings or fillers. | |
| Hanwha EM-3090 | Hanwha Chemical Corporation | Hanwha EM-3090 is a high density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding thermal and viscosity stability. It is well suited for the use in producing wallpapers, sealants, tarpaulins and eathers. | |
| Hanwha EVA 1519 | Hanwha Chemical Corporation | Hanwha EVA 1519 is an Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its...voir plus Hanwha EVA 1519 is an Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1519 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). voir moins | |
| Hanwha EVA 1520 | Hanwha Chemical Corporation | Hanwha EVA 1520 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its ...voir plus Hanwha EVA 1520 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1520 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). voir moins | |
| Hanwha EVA 1528 | Hanwha Chemical Corporation | Hanwha EVA 1528 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its ...voir plus Hanwha EVA 1528 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1528 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). voir moins | |
| Hanwha EVA 1529 | Hanwha Chemical Corporation | Hanwha EVA 1529 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for...voir plus Hanwha EVA 1529 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1529 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). voir moins | |
| Hanwha EVA 1533 | Hanwha Chemical Corporation | Hanwha EVA 1533 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for...voir plus Hanwha EVA 1533 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1533 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). voir moins | |
| Hanwha EVA 1540 | Hanwha Chemical Corporation | Hanwha EVA 1540 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for...voir plus Hanwha EVA 1540 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1540 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). voir moins | |
| Hanwha HB-100 | Hanwha Chemical Corporation | Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-f...voir plus Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. voir moins | |
| Hanwha HB-65 | Hanwha Chemical Corporation | Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-fi...voir plus Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. voir moins | |
| Hanwha I-BuOH (2-Methylpropan-1-Ol) | Hanwha Chemical Corporation | Hanwha I-BuOH is an colorless, transparent liquid made of 2-Methylpropan-1-Ol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents and amino resins as well. | |
| Hanwha KCH-12 | Hanwha Chemical Corporation | Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...voir plus Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. voir moins | |
| Hanwha KCH-15 | Hanwha Chemical Corporation | Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other product...voir plus Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other products requiring satisfactory adhesion to metal surfaces and corrosion resistance. voir moins | |
| Hanwha KCM-12 | Hanwha Chemical Corporation | Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...voir plus Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. voir moins | |
| Hanwha KH-10 | Hanwha Chemical Corporation | Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additi...voir plus Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additional transparency and thermal stability. voir moins | |
| Hanwha KH-31G | Hanwha Chemical Corporation | Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperatu...voir plus Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperature foaming. voir moins | |
| Hanwha KH-31S | Hanwha Chemical Corporation | Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other pro...voir plus Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other products requiring low-temperature foaming products. voir moins | |
| Hanwha KH-60 | Hanwha Chemical Corporation | Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low...voir plus Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low-temperature foaming products. voir moins | |
| Hanwha KL-10 | Hanwha Chemical Corporation | Hanwha KL-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a faster gelling speed than other KH products. It has a low density and absorption rate with a smal change when stood up. It is well suited for use in the pro...voir plus Hanwha KL-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a faster gelling speed than other KH products. It has a low density and absorption rate with a smal change when stood up. It is well suited for use in the production of sealants, moldings and other products requiring low temperature melting. voir moins | |
| Hanwha KL-31 | Hanwha Chemical Corporation | Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature ...voir plus Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature melting foams. voir moins | |
| Hanwha KL-701 | Hanwha Chemical Corporation | Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temper...voir plus Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temperature foaming products. voir moins | |
| Hanwha KM-60 | Hanwha Chemical Corporation | Hanwha KM-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and a small change when stood up. It is well suitable for use in the production of Tarpaulin coatings, transparent labels, erasers and other prod...voir plus Hanwha KM-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and a small change when stood up. It is well suitable for use in the production of Tarpaulin coatings, transparent labels, erasers and other products that require good resistance to water and whitening. voir moins | |
| Hanwha MA (High-purity Maleic Anhydride) | Hanwha Chemical Corporation | Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paint...voir plus Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paints, dyes and pigments. voir moins | |
| Hanwha N-BuOH (N-Butyl Alcohol) | Hanwha Chemical Corporation | Hanwha N-BuOH is an colorless, transparent liquid made of N-Butyl Alcohol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha PA (High-purity Phthalic Anhydride) | Hanwha Chemical Corporation | Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the product...voir plus Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the production of FRP paints and spandex. voir moins | |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...voir plus HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. |
