UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
A-6165 Designer Molecules A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications.
A-675-100% Designer Molecules A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins
BLACK PEARLS® 4040 Cabot Corporation - Additives BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins
BMI-1500 Designer Molecules BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-1700 Designer Molecules BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-3000 Designer Molecules BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-3000 GEL Designer Molecules BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-5000 Designer Molecules BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications.
BMI-5000 50% Toluene Designer Molecules BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications.
CAB-O-SIL® EH5 Cabot Corporation - Additives CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins
CAB-O-SIL® H5 Cabot Corporation - Additives CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins
CAB-O-SIL® LM150 Cabot Corporation - Additives CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins
CAB-O-SIL® M-5 Cabot Corporation - Additives CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins
CAB-O-SIL® TS530 Cabot Corporation - Additives CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins
CAB-O-SIL® TS610 Cabot Corporation - Additives CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins
CAB-O-SIL® TS622 Cabot Corporation - Additives CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins
CAB-O-SIL® TS720 Cabot Corporation - Additives CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins
CAB-O-SPERSE® 1030K Cabot Corporation - Additives CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins
CS-697 Designer Molecules CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins
CS-783 Designer Molecules CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications.
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
Ceridust® 3910 Clariant Plastics & Coatings Ltd. Ceridust® 3910 is a micronized amide wax.
Ceridust® 6050 M Clariant Plastics & Coatings Ltd. Ceridust® 6050 M is a micronized metallocene-based polypropylene wax.
EC-1074 Designer Molecules EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins
EC-234 Designer Molecules EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins
EC-298 Designer Molecules EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins
EC-326 Designer Molecules EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins
EC-392 Designer Molecules EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications.
EC-861 Designer Molecules EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins
ECAT-243 Designer Molecules ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications.
ECAT-259 Designer Molecules ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins
ECAT-353 Designer Molecules ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins
ECAT-434 Designer Molecules ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins
ERISYS™ GE-10 Emerald Performance Materials ERISYS™ GE-10 is an epoxidized ortho cresol, low viscosity, aromatic, mono-epoxide. It is intended for use as a reactive diluent for high viscosity epoxy resins in adhesives. It is compatible at all concentrations with those resins and resin/diluent blend...voir plus ERISYS™ GE-10 is an epoxidized ortho cresol, low viscosity, aromatic, mono-epoxide. It is intended for use as a reactive diluent for high viscosity epoxy resins in adhesives. It is compatible at all concentrations with those resins and resin/diluent blends can be cured using any epoxy resins curing agents. It can be used in concrete, masonry and industrial coatings applications where chemical resistance is desired. voir moins
Exolit® OP 935 Clariant Plastics & Coatings Ltd. Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in ...voir plus Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in solvents like acetone or MEK. voir moins
Exolit® OP 945 (TP) Clariant Plastics & Coatings Ltd. Exolit® OP 945 (TP) is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 µm. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® ...voir plus Exolit® OP 945 (TP) is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 µm. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 945 (TP) can easily be dispersed in solvents like acetone or MEK. voir moins
Good-Rite® 3112 Emerald Performance Materials Good-Rite® 3112 is a clear to pale straw colored liquid partially hindered primary phenolic antioxidant. It provides long-term thermal stability and color preservation in white, mineral-filled adhesive formulations, sealants and caulks.
K-FLEX® 500 Emerald Performance Materials K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate, used as a plasticizer and coalescent agent. It has applications in hot-melt adhesives, water-based latex adhesives, interior and exterior latex paint, coatings and l...voir plus K-FLEX® 500 is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate, used as a plasticizer and coalescent agent. It has applications in hot-melt adhesives, water-based latex adhesives, interior and exterior latex paint, coatings and lacquers. voir moins
K-FLEX® 500P Emerald Performance Materials K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or...voir plus K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that is slightly rich in the diethylene glycol dibenzoate component. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical. It can also be used in adhesives, plastisols and other applications requiring a polar plasticizer with a lower VOC content. voir moins
K-FLEX® 850P Emerald Performance Materials K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polyme...voir plus K-FLEX® 850P is a blend of dipropylene glycol dibenzoate and diethylene glycol dibenzoate specifically designed as a coalescent for dispersions and a high solvating plasticizer for plastisol/vinyl sealants, polysulphide sealants and silane modified polymer sealants. It is also suitable for use in latex adhesives, latex caulks and sealants and architectural and graphic arts coatings. voir moins
K-FLEX® 850S Emerald Performance Materials K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and seala...voir plus K-FLEX® 850S is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate, optimized for use as a plasticizer in waterborne latex applications such as hot-melt adhesives, latex adhesives, interior and exterior latex paint, caulks and sealants and overprint varnishes. It has full FDA approvals for adhesives and was designed to assist the formulator on issues of VOC reduction. voir moins
K-FLEX® 975P Emerald Performance Materials K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plas...voir plus K-FLEX® 975P is a patent-pending blend of diethylene glycol dibenzoate, dipropylene glycol dibenzoate and propylene glycol dibenzoate. It is used as a low VOC plasticizer for water-based latex adhesives , caulks and sealants, putties, screen-printing plastisol inks, architectural latex coatings as a low VOC coalescent/plasticizer, other coatings including graphic arts applications such as waterborne overprint varnish and waterborne flexographic ink. It can also be used as a low VOC coalescent for paint and coating dispersions. voir moins
K-FLEX® DP Emerald Performance Materials K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealan...voir plus K-FLEX® DP is a high solvating plasticizer, comprised of dipropylene glycol dibenzoate. It is compatible with a wide range of polar polymers and can be used in applications such as a low VOC plasticizer in putties, latex adhesives, latex caulks and sealants, coatings and screen-printing plastisol inks. voir moins
K-FLEX® PG Emerald Performance Materials K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex...voir plus K-FLEX® PG is a grade of propylene glycol dibenzoate designed primarily for used as a low VOC plasticizer for silane modified polymer sealants and plastisol printing inks. It is also suitable for use in latex adhesives, latex caulks and sealants and latex coatings. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
Kalama® Benzyl Alcohol NF/FCC Emerald Performance Materials Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for ep...voir plus Kalama® Benzyl Alcohol NF/FCC is a low volatility and low toxicity general purpose solvent which functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. voir moins
Kalama® Benzyl Alcohol Technical Grade Emerald Performance Materials Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. I...voir plus Kalama® Benzyl Alcohol Technical Grade is used as a general solvent in the formulation of inks and lacquers where low volatility and low toxicity are desired. It functions as a coalescent, solvent and co-solvent for cellulose acetate and nitrocellulose. It can be used in a wide range of curing agent formulations for epoxy resins, as a co-catalyst and plasticizer and to keep the temperature low during the curing process. It is also used as a solvent or co-solvent in coatings, inks, adhesives, lacquers and photo developer systems. voir moins
LX®-1035 Resin Neville Chemical Company LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.
LX®-2161 Resin Neville Chemical Company LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins
LX®-238 Resin Neville Chemical Company LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins
Licocene® PE MS 431 granules Clariant Plastics & Coatings Ltd. Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax.
Licocene® PP 1302 granules Clariant Plastics & Coatings Ltd. Licocene® PP 1302 granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity.
Licocene® PP 1502 granules Clariant Plastics & Coatings Ltd. Licocene® PP 1502 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity.
Licocene® PP 1602 granules Clariant Plastics & Coatings Ltd. Licocene® PP 1602 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity.
Licocene® PP 2502 granules TP Clariant Plastics & Coatings Ltd. Licocene® PP 2502 granules TP is a low crystalline metallocene-technology based propylene-ethylene-copolymer.
Licocene® PP 2602 fine grain TP Clariant Plastics & Coatings Ltd. Licocene® PP 2602 fine grain TP is a low crystalline metallocene-technololgy based propylene-ethylene-copolymer.
Licocene® PP 2602 granules Clariant Plastics & Coatings Ltd. Licocene® PP 2602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer.
Licocene® PP 3602 granules Clariant Plastics & Coatings Ltd. Licocene® PP 3602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer.
Licocene® PP 6102 granules Clariant Plastics & Coatings Ltd. Licocene® PP 6102 granules is a low viscous, crystalline metallocene polypropylene wax.
Licocene® PP MA 6252 granules Clariant Plastics & Coatings Ltd. Licocene® PP MA 6252 granules is a maleic anhydride grafted polypropylene wax.
Licocene® PP MA 6452 granules Clariant Plastics & Coatings Ltd. Licocene® PP MA 6452 granules is a maleic anhydride grafted polypropylene wax.
Licocene® PP MA 7452 granules Clariant Plastics & Coatings Ltd. Licocene® PP MA 7452 granules is a maleic anhydride grafted polypropylene wax.
MM-204 Designer Molecules MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins
MM-211 Designer Molecules MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins
MM-220 Designer Molecules MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins
MM-281 Designer Molecules MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins
MM-290 Designer Molecules MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications.
MM-304 Designer Molecules MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins
NEVCHEM® 100 Neville Chemical Company NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins
NEVCHEM® 110 Neville Chemical Company NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins
NEVCHEM® 120 Neville Chemical Company NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 130 Neville Chemical Company NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins
NEVCHEM® 140 Neville Chemical Company NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 150 Neville Chemical Company NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins
NEVCHEM® 200 Neville Chemical Company NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins
NEVCHEM® 220 Neville Chemical Company NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins
NEVCHEM® 240 Neville Chemical Company NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins
NEVCHEM® 250 Neville Chemical Company NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins
NEVEX® 1069 Neville Chemical Company NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins
NEVPENE® 9545 Neville Chemical Company NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins
NEVTAC® 10 Neville Chemical Company NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers.
Nychem™1562 Emerald Performance Materials Nychem™1562 is a noncarboxylated butadiene acrylonitrile copolymer latex with a medium nitrile content featuring a combination oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product is primarily used ...voir plus Nychem™1562 is a noncarboxylated butadiene acrylonitrile copolymer latex with a medium nitrile content featuring a combination oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product is primarily used as a nitrile emulsion for paper saturation and textile coatings. Nychem™1562 may also be used as a wet laminating resin or heat seal adhesive for rubber and textiles. voir moins
Nychem™1562X103 Emerald Performance Materials Nychem™1562X103 is a butadiene acrylonitrile copolymer latex with a medium nitrile content which features a combination of oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product's primary application...voir plus Nychem™1562X103 is a butadiene acrylonitrile copolymer latex with a medium nitrile content which features a combination of oil, grease and hydrocarbon resistance, toughness/resilience, and tear and abrasion resistance. This product's primary applications are in adhesives, RFL dips, and metal coatings. Nychem™1562X103 can also be applied as a wet laminating resin or heat seal adhesive to rubber and textiles. voir moins
Nychem™1570X79 Emerald Performance Materials Nychem™1570x79 is a carboxylated butadiene acrylonitrile copolymer that is used as a medium nitrile synthetic anionic emulsifier. This product can be applied as a wet laminating resin/hot seal adhesive or can be used to increase abrasion, oil and water r...voir plus Nychem™1570x79 is a carboxylated butadiene acrylonitrile copolymer that is used as a medium nitrile synthetic anionic emulsifier. This product can be applied as a wet laminating resin/hot seal adhesive or can be used to increase abrasion, oil and water resistance, and/or wear resistance and flexibility in textile coatings. Nychem™1570x79 can also be used in textile coatings to improve tear strength and puncture resistance and is commonly deployed as a nonwoven binder. voir moins
Nychem™1572 Emerald Performance Materials Nychem™1572 is a carboxylated butadiene acrylonitrile copolymer that is used as a nitrile synthetic anionic emulsifier. As an adhesive, this product can be used as a wet laminating resin/heat seal adhesive. Nychem™1572 can be used to improved tear resis...voir plus Nychem™1572 is a carboxylated butadiene acrylonitrile copolymer that is used as a nitrile synthetic anionic emulsifier. As an adhesive, this product can be used as a wet laminating resin/heat seal adhesive. Nychem™1572 can be used to improved tear resistance and toughness in paper coatings and can be used in textile coatings to increase abrasion, improve tear resistance, flexibility, and puncture resistance. voir moins
Nychem™1577 Emerald Performance Materials Nychem™1577 is a non-carboxylated ABS latex that offers a balance of resistance to both polar and nonpolar solvents. Since this product is non-carboxylated, it has a strong resistance to caustic entities. This product is primarily used in RFL dip adhe...voir plus Nychem™1577 is a non-carboxylated ABS latex that offers a balance of resistance to both polar and nonpolar solvents. Since this product is non-carboxylated, it has a strong resistance to caustic entities. This product is primarily used in RFL dip adhesive applications because of its durability and resistance to water and alkili. voir moins
Nychem™1578X1 Emerald Performance Materials Nychem™1578X1 is a carboxylated acrylonitrile butadiene styrene latex that can be used as a wet laminating resin or heat seal adhesive on rubber, metal and textiles. This product is a also used to enhance textile coating properties for water resistance, ...voir plus Nychem™1578X1 is a carboxylated acrylonitrile butadiene styrene latex that can be used as a wet laminating resin or heat seal adhesive on rubber, metal and textiles. This product is a also used to enhance textile coating properties for water resistance, oil or solvent resistance, abrasion and wear resistance and flexibility. It is often used in conjunction with other compatible water-based polymers. voir moins
Nychem™1581 Emerald Performance Materials Nychem™1581 is carboxylated butadiene acrylonitrile polymer latex with a high nitrile content featuring a combination oil, grease and hydrocarbon resistance. This product is used as a wet laminating resin or heat seal adhesive as well as an enhancer for...voir plus Nychem™1581 is carboxylated butadiene acrylonitrile polymer latex with a high nitrile content featuring a combination oil, grease and hydrocarbon resistance. This product is used as a wet laminating resin or heat seal adhesive as well as an enhancer for textile coating properties which provides water, oil, solvent, abrasion, and wear resistance. Nychem™1581 is compatible with phenolic resins and resistant to caustic entities. voir moins
PEAM-1044 Designer Molecules PEAM-1044 is a amber liquid form polyester acrylate/methacrylate. This product features excellent adhesion, low warpage, and hydrophobicity. PEAM-1044 is most commonly used as an additive in base resin application.
PEAM-1769 Designer Molecules PEAM-1769 is a amber liquid form polyester acrylate/methacrylate. This product exhibits excellent adhesion, low warpage, and hydrophobicity. PEAM-1769 is most commonly used as an additive in base oligomer application.
PEAM-645 Designer Molecules PEAM-645 is an amber liquid form polyester acrylate/methacrylate. This product has very high thermal stability and low volatility. PEAM-645 is most commonly used as a base resin in adhesive and coating applications.
PEM-1066 Designer Molecules PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly ...voir plus PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly used in base resin applications. voir moins
SpectrAl® 100 Cabot Corporation - Additives SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products.
SpectrAl® 51 Cabot Corporation - Additives SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products.
SpectrAl® 81 Cabot Corporation - Additives SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products.
U-793 Designer Molecules U-793 is a brown viscous liquid form, urethane resin. This product yields a tough hydrophobic polymer when cured. U-793 is most commonly used as an adhesion promoter to various substrates.