| 2-(2-Aminoethoxy) ethanol | Univar Solutions | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | Request Sample |
| 200W™ | Univar Solutions | 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grout...voir plus 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grouts, ceramics, and coatings. voir moins | Request Sample |
| 3NG810 | Univar Solutions | 3NG810 is an ester of TMP alcohol and C8C10 acid, and is used as a lubricant in synthetic engine oils. | Request Sample |
| 40-200™ | Univar Solutions | 40-200™ is a dry ground marble with a coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings, and abrasives. | Request Sample |
| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| Acrylic Acid, Glacial | Univar Solutions | This is glacial acrylic acid. | Request Sample |
| ACRYSOL™ ASE-60 | Univar Solutions | ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly ...voir plus ACRYSOL™ ASE-60 is an APEO-free*, solvent-free* acid-containing, alkali-soluble emulsion (ASE) thickener for latex coatings. When neutralized with a base, this product effectively increases low-shear (Brookfield) viscosity to deliver coatings with highly shear-thinning characteristics. This product is delivered as a high-solids liquid for ease of handling in manufacturing. voir moins | Request Sample |
| ACRYSOL™ ASE-75 | Univar Solutions | ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in imp...voir plus ACRYSOL™ ASE-75 is an acid containing, acrylic emulsion copolymer, when diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. It is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics. voir moins | Request Sample |
| ACRYSOL™ DR-1 | Univar Solutions | ACRYSOL™ DR-1 is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. This product provides application and feel properties very similar to medium grades of cellulosic an...voir plus ACRYSOL™ DR-1 is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. This product provides application and feel properties very similar to medium grades of cellulosic and hydrophobically modified HEC thickeners with excellent resistance to roller spattering and improved leveling in most formulations. This product is easy to handle and incorporate during the paint manufacturing process and is highly resistant to microbial attack. voir moins | Request Sample |
| ACRYSOL™ DR-110 | Univar Solutions | ACRYSOL™ DR-110 is an APEO-free*, solvent free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. It is a cost effective alternative to HMHEC for thickening a full range of waterborne latex coatings. It i...voir plus ACRYSOL™ DR-110 is an APEO-free*, solvent free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. It is a cost effective alternative to HMHEC for thickening a full range of waterborne latex coatings. It is effective at building viscosity in formulations from flat to semi-gloss and across all binder types, offering desirable application and feel properties, plus the cost advantage of better efficiency and the manufacturing ease of an all-liquid product. voir moins | Request Sample |
| ACRYSOL™ DR-2 | Univar Solutions | ACRYSOL™ DR-2 is a synthetic, liquid thickener that offers a low cost/high performance alternative to medium grade cellulosic thickeners in interior flat latex paints, with outstanding spatter resistance. It is easy to handle and incorporate into the pain...voir plus ACRYSOL™ DR-2 is a synthetic, liquid thickener that offers a low cost/high performance alternative to medium grade cellulosic thickeners in interior flat latex paints, with outstanding spatter resistance. It is easy to handle and incorporate into the paint and is formulated to resist microbial contamination. voir moins | Request Sample |
| ACRYSOL™ DR-5500 | Univar Solutions | ACRYSOL™ DR-5500 is an APEO-free*, solvent-free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. The product is effective in improving the high shear (ICI) viscosity of waterborne coatings, resulting in...voir plus ACRYSOL™ DR-5500 is an APEO-free*, solvent-free*, hydrophobically modified, alkali-soluble emulsion (HASE) rheology modifier for waterborne coatings. The product is effective in improving the high shear (ICI) viscosity of waterborne coatings, resulting in coatings that have high film build characteristicsfor improved hiding and appearance. It is delivered as a low viscosity liquid to allow for easy handling and easy incorporation during the manufacturing process. voir moins | Request Sample |
| ACRYSOL™ DR-6600 | Univar Solutions | ACRYSOL™ DR-6600 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product is effective in improving the high shear viscosity, resulting in coatings that have high ...voir plus ACRYSOL™ DR-6600 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product is effective in improving the high shear viscosity, resulting in coatings that have high film build characteristics for improved hiding and appearance. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. voir moins | Request Sample |
| ACRYSOL™ DR-73 | Univar Solutions | ACRYSOL™ DR-73 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. This product builds efficient mid-shear (KU) and ICI (high shear) viscosity, which offers application a...voir plus ACRYSOL™ DR-73 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. This product builds efficient mid-shear (KU) and ICI (high shear) viscosity, which offers application and feel properties similar to medium grades of HEC and HMHEC cellulosic thickeners, as well as increased high shear viscosity for higher film build, brush drag and hiding. . voir moins | Request Sample |
| ACRYSOL™ I-62 A | Univar Solutions | ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially...voir plus ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially useful in formulations designed for thermosetting applications. It is a waterborne colloidal dispersion containing both carboxylic acid and hydroxyl functionality, and as such will crosslink with melamine-formaldehyde or urea-formaldehyde resins, thereby becoming part of the polymer matrix and improving the film properties. voir moins | Request Sample |
| ACRYSOL™ RM-1020 | Univar Solutions | ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance com...voir plus ACRYSOL™ RM-1020 is a low solids, ammonium polyacrylate solution which has been designed as a thickening agent for water borne paints, offering easy handling and addition during paint manufacture. It offers improvement in flow and leveling performance compared to paints using cellulosic thickeners. voir moins | Request Sample |
| ACRYSOL™ RM-12W | Univar Solutions | ACRYSOL™ RM-12W is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It is designed to offer high low-shear (Brookfield) viscosity with an extremely shear thinning rheology and excellent thickening ef...voir plus ACRYSOL™ RM-12W is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It is designed to offer high low-shear (Brookfield) viscosity with an extremely shear thinning rheology and excellent thickening efficiency. This rheology profile helps improve brush/roller loading, while offering good anti-drip properties, good in-can structure, and an excellent flow/sag balance. voir moins | Request Sample |
| ACRYSOL™ RM-2020 NPR | Univar Solutions | ACRYSOL™ RM-2020 NPR is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This offers efficient high-shear (ICI) viscosity build and a Newtonian rheology profile. It can be used either alone or in combi...voir plus ACRYSOL™ RM-2020 NPR is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This offers efficient high-shear (ICI) viscosity build and a Newtonian rheology profile. It can be used either alone or in combination with other rheology modifiers to impart excellent flow and leveling, film build, gloss development, and water resistance. voir moins | Request Sample |
| ACRYSOL™ RM-3000 | Univar Solutions | ACRYSOL™ RM-3000 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that is highly Newtonian, which makes it very useful for building high-shear (ICI) viscosity and ob...voir plus ACRYSOL™ RM-3000 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that is highly Newtonian, which makes it very useful for building high-shear (ICI) viscosity and obtaining excellent flow and leveling. It offers ICI efficiency between ACRYSOL™ RM-2020 NPR and ACRYSOL™ RM-5000. voir moins | Request Sample |
| ACRYSOL™ RM-3030 | Univar Solutions | ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal ...voir plus ACRYSOL™ RM-3030 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier based on proprietary technology. This ICI-building associative thickener offers formulators efficient ICI contribution with minimal KU response. This product has demonstrated improved flow and leveling, improved syneresis resistance, and good film build in flat to gloss formulations. voir moins | Request Sample |
| ACRYSOL™ RM-400 | Univar Solutions | ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow...voir plus ACRYSOL™ RM-400 is a solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, designed as a KU-building associative thickener offering formulators an excellent balance of sag resistance, particularly in tinted paints, flow and leveling, and gloss development for interior and exterior paints. It also contributes significant ICI viscosity, allowing the reduction of ICI builder to approximately 25% of other starting point formulations. voir moins | Request Sample |
| ACRYSOL™ RM-5000 | Univar Solutions | ACRYSOL™ RM-5000 is an APEO-free*, solvent-free* hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. It offers a shear rate profile that gives a good balance of flow and leveling as well as high film build. | Request Sample |
| ACRYSOL™ RM-6000 | Univar Solutions | ACRYSOL™ RM-6000 is a non-ionic urethane rheology modifier based on solvent-free technology, offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and...voir plus ACRYSOL™ RM-6000 is a non-ionic urethane rheology modifier based on solvent-free technology, offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. It has demonstrated utility in a broad range of emulsions, including the “newer generation,” low-VOC type resins like RHOPLEX™ SG-30 and RHOPLEX™ ML-300. voir moins | Request Sample |
| ACRYSOL™ RM-7 | Univar Solutions | ACRYSOL™ RM-7 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product offers a much more Newtonian rheology profile than cellulosic thickeners, enabling lower vis...voir plus ACRYSOL™ RM-7 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product offers a much more Newtonian rheology profile than cellulosic thickeners, enabling lower viscosity in low-shear conditions and higher viscosity in high-shear conditions. It is supplied as a high solids, low viscosity liquid for ease of use in manufacturing. voir moins | Request Sample |
| ACRYSOL™ RM-725 | Univar Solutions | ACRYSOL™ RM-725 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. It builds mid-shear (KU) viscosity while also contrib...voir plus ACRYSOL™ RM-725 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. It builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener usage. It offers formulators an excellent balance of sag resistance and leveling, especially in paints utilizing vinyl acrylic binder technology. voir moins | Request Sample |
| ACRYSOL™ RM-8 | Univar Solutions | ACRYSOL™ RM-8 is a nonionic, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier, which doesn't require pH adjustment for textile formulations. | Request Sample |
| ACRYSOL™ RM-825 | Univar Solutions | ACRYSOL™ RM-825 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This designed for formulating interior/exterior water-based latex coatings ranging from highly structured coatings to coatings that portray nearly-...voir plus ACRYSOL™ RM-825 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This designed for formulating interior/exterior water-based latex coatings ranging from highly structured coatings to coatings that portray nearly-Newtonian behavior. It is delivered at 25% solids with butyl carbitol as its cosolvent. voir moins | Request Sample |
| ACRYSOL™ RM-845 | Univar Solutions | ACRYSOL™ RM-845 is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. This offers excellent flow and leveling, as well as glo...voir plus ACRYSOL™ RM-845 is an APEO-free, solvent-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ to produce an excellent balance of properties. This offers excellent flow and leveling, as well as gloss development, for both interior and exterior paints. It imparts a rheological profile to architectural and industrial coatings very similar to that of ACRYSOL™ RM-825 Rheology Modifier, but with the benefit of no added solvent, allowing for ultra-low VOC formulations. voir moins | Request Sample |
| ACRYSOL™ RM-895 | Univar Solutions | ACRYSOL™ RM-895 is a solvent-free, nonionic, hydrophobically modified ethylene oxide uretane (HEUR) associative thickener providing enhanced viscosity stability to colorant addition when compared to existing HEUR thickeners. This KU-building associative t...voir plus ACRYSOL™ RM-895 is a solvent-free, nonionic, hydrophobically modified ethylene oxide uretane (HEUR) associative thickener providing enhanced viscosity stability to colorant addition when compared to existing HEUR thickeners. This KU-building associative thickener offers formulators an excellent balance of sag resistance in tinted paints, flow and leveling, and gloss development for interior and exterior paints. voir moins | Request Sample |
| ACRYSOL™ RM-8W | Univar Solutions | ACRYSOL™ RM-8W is a nonionic urethane rheology modifier, designed to formulate high performance, environmentally friendly, low VOC solvent-free interior/exterior paints. It has a pseudoplastic rheology profile, similar to the ones of ACRYSOL™ RM-8 and ACR...voir plus ACRYSOL™ RM-8W is a nonionic urethane rheology modifier, designed to formulate high performance, environmentally friendly, low VOC solvent-free interior/exterior paints. It has a pseudoplastic rheology profile, similar to the ones of ACRYSOL™ RM-8 and ACRYSOL™ RM-825 but is delivered free of solvents. It allows the formulation of paints with an excellent balance between flow and sag and can be used as a cothickener in many types of formulations for attaining a desired balance of low and high shear viscosities. It has excellent compatibility at all blend ratios with the more Newtonian, solvent-free rheology modifier ACRYSOL™ RM-2020. The combination of the two, gives a wider formulation latitude to the paint formulator than previously attainable for solvent-free systems. ACRYSOL™ RM-8W is delivered as a low viscosity liquid and is therefore very easy to incorporate and should improve the paint manufacturing process. voir moins | Request Sample |
| ACRYSOL™ RM-995 | Univar Solutions | ACRYSOL™ RM-995 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ technology. This product is a mid-shear (KU) viscosity rheology modifier offers improved performance...voir plus ACRYSOL™ RM-995 is an APEO-free*, solvent-free*, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier that utilizes ACID SUPPRESSION™ technology. This product is a mid-shear (KU) viscosity rheology modifier offers improved performance in viscosity stability upon tinting and excellent sag resistance.while maintaining the properties that HEUR technology is known for, e.g. excellent flow, gloss development and applicability both interior and exterior latex coatings. It is provided as a low-viscosity material for ease of use in the manufacturing process. voir moins | Request Sample |
| ACRYSOL™ SCT-275 | Univar Solutions | ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener...voir plus ACRYSOL™ SCT-275 is an APEO-free, hydrophobically modified ethylene oxide urethane (HEUR) rheology modifier. This builds mid-shear (KU) viscosity while also contributing to high-shear (ICI) viscosity build, allowing for a reduction of high shear thickener usage. It offers formulators an excellent balance of sag resistance and leveling, especially in paints utilizing vinyl acrylic binder technology. voir moins | Request Sample |
| ACRYSOL™ TT-615 | Univar Solutions | ACRYSOL™ TT-615 is an APEO-free, solvent-free, hydrophobically modified, alkali-soluble emulsion (HASE) thickener for latex coatings. Thisexhibits low-shear (Brookfield) viscosity build comparable to high molecular weight HEC thickeners, leading to a high...voir plus ACRYSOL™ TT-615 is an APEO-free, solvent-free, hydrophobically modified, alkali-soluble emulsion (HASE) thickener for latex coatings. Thisexhibits low-shear (Brookfield) viscosity build comparable to high molecular weight HEC thickeners, leading to a highly shear-thinning rheology profile that can helps build sag resistance and help reduce pigment settling in latex coatings. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. voir moins | Request Sample |
| ACRYSOL™ TT-935 | Univar Solutions | ACRYSOL™ TT-935 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product can be used to build viscosity in the low, medium, and high-shear range as an alternative ...voir plus ACRYSOL™ TT-935 is an APEO-free*, solvent-free*, hydrophobically-modified alkali-soluble (HASE) rheology modifier for waterborne architectural coatings. The product can be used to build viscosity in the low, medium, and high-shear range as an alternative to cellulosic thickeners, offering better film build, better leveling, and easier incorporation into coatings than cellulosic thickeners. It is supplied as a low viscosity liquid that is easy to handle and incorporate during the manufacturing process. voir moins | Request Sample |
| ACRYSOL™ WS-24 | Univar Solutions | ACRYSOL™ WS-24 is a colloidal dispersion that is recommended for alkali-removable, temporary coatings. the product offers good pigment dispersing properties. | Request Sample |
| ACRYSOL™ WS-68 | Univar Solutions | ACRYSOL™ WS-68 is a colloidal dispersion that, when formulated with monomeric melamine resins, facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties. This product offers high gloss and DOI ...voir plus ACRYSOL™ WS-68 is a colloidal dispersion that, when formulated with monomeric melamine resins, facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties. This product offers high gloss and DOI properties. voir moins | Request Sample |
| AEPD VOX 1000 | Univar Solutions | AEPD® VOX 1000 neutralizing amino alcohol is a multifunctional additive for low-odor, low-VOC interior water-based paints. The multifunctional nature allows significant reduction in primary dispersant, defoamer, glycols and coalescing agents. . | Request Sample |
| AEROSOL® 22 Surfactant | Univar Solutions | AEROSOL® 22 Surfactant is a surfactant combining high hydrophilic and hydrophobic moieties with excellent acid and alkali compatibility. Emulsifier, dispersant, and hydrotrope solubilizer. Primary and secondary emulsifier in emulsion polymerization. | Request Sample |
| AEROSOL® IB-45 Surfactant | Univar Solutions | AEROSOL® IB-45 Surfactant is a very hydrophilic surface active agent that exhibits excellent compatibility with electrolytes. It is an extremely efficient wetting agent in high concentrations of electrolytes. | Request Sample |
| AEROSOL® MA-80 I Surfactant | Univar Solutions | AEROSOL® MA-80 I Surfactant is a surface tension depressant and an emulsifying, dispersing, and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films which break up into minute droplets...voir plus AEROSOL® MA-80 I Surfactant is a surface tension depressant and an emulsifying, dispersing, and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films which break up into minute droplets. voir moins | Request Sample |
| AEROSOL® OT-70 PG Surfactant | Univar Solutions | AEROSOL® OT-70 PG Surfactant is a surfactant with high flash point. It is an excellent wetting, re-wetting, and levelling agent. | Request Sample |
| AEROSOL® OT-75 Surfactant | Univar Solutions | AEROSOL® OT-75 Surfactant is a surfactant with excellent wetting, re-wetting, and levelling agent. | Request Sample |
| AEROSOL® OT-B Surfactant | Univar Solutions | AEROSOL® OT-B Surfactant is widely used in the preparation of readily wettable and dispersible agricultural free-flowing powder and water-soluble granule formulations. | Request Sample |
| ALKATERGE T | Univar Solutions | ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible wit...voir plus ALKATERGE T is a nonvolatile surface active agent which is a waxy solid at room temperature, only slightly soluble in water, yet soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE-T is miscible with almost all organic liquids. ALKATERGE-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. voir moins | Request Sample |
| AMP REGULAR | Univar Solutions | AMP REGULAR is a very efficient co-dispersant for pigments, and contributes pH stability, low odor, and anticorrosive properties; furthermore, it promotes acceptance of colorants. | Request Sample |
| AMP-95 | Univar Solutions | AMP-95 is a multifunctional specialty additive with a relatively low viscosity provides numerous benefits including co-dispersing, neutralization, low odor, formaldehyde scavenging and meets various FDA approvals for indirect food contact. | Request Sample |
| AQUACER 8075 | Univar Solutions | AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...voir plus AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. voir moins | Request Sample |
| AQUACER 8976 | Univar Solutions | AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 i...voir plus AQUACER 8976 improves buffability, increases filling capacity and produces a strong anti-slip effect. The above mentioned properties are generated by mixing AQUACER 8976 with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8976 is compatible with all known polymer dispersions and plasticizers. voir moins | Request Sample |
| AQUASET 110 | Univar Solutions | AQUASET 110 is a 50% solids binder made without formaldehyde or formaldehyde-generating materials, engineered for fiberglass webs used in roofing, flooring, specialty mats, and HVAC filters. It can also be used for bonding other substrates such as cellulo...voir plus AQUASET 110 is a 50% solids binder made without formaldehyde or formaldehyde-generating materials, engineered for fiberglass webs used in roofing, flooring, specialty mats, and HVAC filters. It can also be used for bonding other substrates such as cellulose, carbon, ceramic and high-temperature polyester fibers. voir moins | Request Sample |
| AVANSE™ MV-100 | Univar Solutions | AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field ...voir plus AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field applied finishes for metal, concrete and masonry substrates. It has the ability to be formulated into high performance coating at or below 100 g/L of volatile organic content (VOC). voir moins | Request Sample |
| AVANSE™ ST-410 | Univar Solutions | AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy m...voir plus AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy metal driers to enhance the long lasting appearance of new or weathered wood. It's morphology and unique particle stabilization maximize the flow and lapping characteristics during application while building early resistance properties upon drying. voir moins | Request Sample |
| BARECO™ C-4040 | Univar Solutions | BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available i...voir plus BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available in grades ranging from hard, high melting crystalline waxes to soft, low melting flexible waxes. voir moins | Request Sample |
| BLACK PEARLS® 1000 | Univar Solutions | BLACK PEARLS® 1000 is a small particle-treated grade designed to enable excellent jet mass tone with strong tinting strength in high-performance automotive, industrial, and architecture coatings. BLACK PEARLS® 1000 specialty carbon black has small particl...voir plus BLACK PEARLS® 1000 is a small particle-treated grade designed to enable excellent jet mass tone with strong tinting strength in high-performance automotive, industrial, and architecture coatings. BLACK PEARLS® 1000 specialty carbon black has small particles that enable excellent jetness and UV absorption for good exterior durability. It is suitable for use in high-end coatings that require high jetness and strong tinting strength. voir moins | Request Sample |
| BLACK PEARLS® 1180HD | Univar Solutions | BLACK PEARLS® 1180HD is designed for use in engineering and high-performance thermoplastics. BLACK PEARLS® 1180HD specialty carbon black enables an unprecedented combination of high jetness and mechanical strength in plastic compounds. | Request Sample |
| BLACK PEARLS® 120 | Univar Solutions | BLACK PEARLS® 120 is a general-purpose pigment black suitable for a broad range of tinting applications. Easy to disperse, this economical pigment black can allow higher loading in most systems. | Request Sample |
| BLACK PEARLS® 1300 | Univar Solutions | BLACK PEARLS® 1300 is a versatile and easily dispersable carbon black for coatings applications. The pigment imparts a relatively strong blue undertone and level of gloss compared to other Cabot carbon blacks. It delivers consistent performance and can be...voir plus BLACK PEARLS® 1300 is a versatile and easily dispersable carbon black for coatings applications. The pigment imparts a relatively strong blue undertone and level of gloss compared to other Cabot carbon blacks. It delivers consistent performance and can be mixed using varying performance tiers of equipment technology. voir moins | Request Sample |
| BLACK PEARLS® 160 | Univar Solutions | BLACK PEARLS® 160 is a general purpose low color pigment black suitable for a broad range of tinting and less demanding weathering applications. | Request Sample |
| BLACK PEARLS® 2000 | Univar Solutions | BLACK PEARLS® 2000 is a very fine particle-sized, super high surface area, a conductive product with an extremely high structure. It is a furnace process carbon black designed for critical applications demanding excellent conductivity and good physical pr...voir plus BLACK PEARLS® 2000 is a very fine particle-sized, super high surface area, a conductive product with an extremely high structure. It is a furnace process carbon black designed for critical applications demanding excellent conductivity and good physical properties. BLACK PEARLS® 2000 carbon black offers excellent conductivity and anti-static discharge properties at very low loadings in rubber compounds. voir moins | Request Sample |
| BLACK PEARLS® 280 | Univar Solutions | BLACK PEARLS® 280 is a general-purpose carbon black suitable for a variety of tinting, coloring, and UV applications. | Request Sample |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BLACK PEARLS® 430 | Univar Solutions | BLACK PEARLS® 430 is a general-purpose carbon black suitable for a variety of tinting, coloring, and UV applications in plastics and dispersions. | Request Sample |
| BLACK PEARLS® 4350 | Univar Solutions | BLACK PEARLS® 4350 is suitable for use in plastic materials that are intended to comply with the U.S. Food & Drug Administration (FDA) requirements (21 CFR 178.3297). This FDA section requires high-purity furnace blacks to meet certain purity levels for p...voir plus BLACK PEARLS® 4350 is suitable for use in plastic materials that are intended to comply with the U.S. Food & Drug Administration (FDA) requirements (21 CFR 178.3297). This FDA section requires high-purity furnace blacks to meet certain purity levels for polycyclic aromatic hydrocarbons (PAHs) and limits use to final loading less than 2.5%. voir moins | Request Sample |
| BLACK PEARLS® 4750 | Univar Solutions | BLACK PEARLS® 4750 is suitable for use in plastic materials that are intended to comply with the U.S. Food & Drug Administration (FDA) requirements (21 CFR 178.3297). This FDA section requires high-purity furnace blacks to meet certain purity levels for p...voir plus BLACK PEARLS® 4750 is suitable for use in plastic materials that are intended to comply with the U.S. Food & Drug Administration (FDA) requirements (21 CFR 178.3297). This FDA section requires high-purity furnace blacks to meet certain purity levels for polycyclic aromatic hydrocarbons (PAHs) and limits use to final loading to less than 2.5%. voir moins | Request Sample |
| BLACK PEARLS® 4840 | Univar Solutions | BLACK PEARLS® 4840 is highly dispersible which allows master batch producers and compounders to achieve superior surface smoothness, mechanical performance, and color performance in visible molded parts. | Request Sample |
| BLACK PEARLS® 5560 | Univar Solutions | BLACK PEARLS® 5560 provides the following competitive advantages to synthetic fiber spinners and masterbatch color concentrate; A very high level of jet-ness with blue tone, a high cleanliness, resulting in excellent filter-ability, increased spin-pack li...voir plus BLACK PEARLS® 5560 provides the following competitive advantages to synthetic fiber spinners and masterbatch color concentrate; A very high level of jet-ness with blue tone, a high cleanliness, resulting in excellent filter-ability, increased spin-pack life and reduced fiber breakage, and consistent quality and low lot-to-lot variability. voir moins | Request Sample |
| BLACK PEARLS® 570 | Univar Solutions | BLACK PEARLS® 570 provides good coloration and covering power for general-purpose molded plastics applications. It is also suitable for use in coatings applications. | Request Sample |
| BLACK PEARLS® 630 | Univar Solutions | BLACK PEARLS® 630 is a new product offering a balance of jet-ness and blue-tone for use in a broad range of polymers for general purpose plastics applications. It is designed to offer additional color without sacrificing the ease-of-dispersion characteris...voir plus BLACK PEARLS® 630 is a new product offering a balance of jet-ness and blue-tone for use in a broad range of polymers for general purpose plastics applications. It is designed to offer additional color without sacrificing the ease-of-dispersion characteristics of similar carbon blacks such as ELFTEX® 570 carbon black. voir moins | Request Sample |
| BLACK PEARLS® 700 | Univar Solutions | BLACK PEARLS® 700 delivers a balance of medium jetness and a blue undertone. Compared to other Cabot medium carbon blacks, it offers excellent dispersibility partially due to its morphology as measured by iodine number and OAN. | Request Sample |
| BLACK PEARLS® 800 | Univar Solutions | BLACK PEARLS® 800 sets the industry standard for high jetness black coloration of plastic parts used in diverse, high-value, aesthetic applications including automotive and electronics. It is also used in applications where black coloration but low-carbon...voir plus BLACK PEARLS® 800 sets the industry standard for high jetness black coloration of plastic parts used in diverse, high-value, aesthetic applications including automotive and electronics. It is also used in applications where black coloration but low-carbon black loadings are required. voir moins | Request Sample |
| BLACK PEARLS® 880 | Univar Solutions | BLACK PEARLS® 880 delivers very high-jetness black coloration of plastics as well as excellent surface quality and retention of polymer mechanical properties. It can be used in many high-value, aesthetic applications where high levels of carbon black disp...voir plus BLACK PEARLS® 880 delivers very high-jetness black coloration of plastics as well as excellent surface quality and retention of polymer mechanical properties. It can be used in many high-value, aesthetic applications where high levels of carbon black dispersion are required, including automotive and electronics molded parts. voir moins | Request Sample |
| BLACK PEARLS® 900 | Univar Solutions | BLACK PEARLS® 900 offers the highest level of jetness available within Cabot’s specialty carbon black portfolio for plastics applications. It can enable masterbatch and compound producers to meet increasingly stringent requirements for deep black color in...voir plus BLACK PEARLS® 900 offers the highest level of jetness available within Cabot’s specialty carbon black portfolio for plastics applications. It can enable masterbatch and compound producers to meet increasingly stringent requirements for deep black color in visible molded parts in automotive and electronics applications. voir moins | Request Sample |
| BLACK PEARLS® E | Univar Solutions | BLACK PEARLS® E is designed for use in UV ink applications. It is a blue-tone pigment black. Due to its oxidized surface, BLACK PEARLS® E specialty carbon black disperses well and can impart low viscosity and good dispersion stability. In comparison to ot...voir plus BLACK PEARLS® E is designed for use in UV ink applications. It is a blue-tone pigment black. Due to its oxidized surface, BLACK PEARLS® E specialty carbon black disperses well and can impart low viscosity and good dispersion stability. In comparison to other carbon blacks for ink applications, BLACK PEARLS® E has lower cure energy and photo initiator requirements. voir moins | Request Sample |
| BLACK PEARLS® L | Univar Solutions | BLACK PEARLS® L is a low-structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings , and other applications. Ultimately, the dispersibility of BLACK PEARLS® L specialty carbon black depends on the equipment u...voir plus BLACK PEARLS® L is a low-structure specialty black pigment that can impart high gloss and high jetness in printing inks, coatings , and other applications. Ultimately, the dispersibility of BLACK PEARLS® L specialty carbon black depends on the equipment used and the formulation. With its oxidized surface, it disperses more easily than other Cabot carbon blacks used in higher jetness applications. voir moins | Request Sample |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| BYK®-012 | BYK | BYK®-012 is a mineral oil and silicone free defoamer for aqueous VOC-free adhesives and sealants. | |
| BYK®-016 | BYK | BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants. | |
| BYK®-022 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-023 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-024 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-025 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-028 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-035 | BYK | BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces. | |
| BYK®-037 | BYK | BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient. | |
| BYK®-038 | BYK | BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...voir plus BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. voir moins | |
| BYK®-077 | BYK | BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when reco...voir plus BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated. voir moins | |
| BYK®-085 | BYK | Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exist...voir plus Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists. voir moins | |
| BYK®-088 | BYK | Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems. | |
| BYK®-093 | BYK | High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty. | |
| BYK®-1610 | BYK | BYK®-1610 is a defoamer for emulsion-based adhesives and sealants. | |
| BYK®-1615 | BYK | BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. |
