| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| Andisil 1100 Silane | AB Specialty Silicones | Andisil 1100 Silane is an amino silane coupling agent. It is used to provide a bond between inorganic substrates and organic polymers. Andisil 1100 Silane is recommended for fiberglass reinforced composites. | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in R...voir plus Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. voir moins | |
| Andisil 1120 Silane | AB Specialty Silicones | Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane ...voir plus Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, and more. voir moins | |
| Andisil 1122 Silane | AB Specialty Silicones | Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, poly...voir plus Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. voir moins | |
| Andisil 1130 Silane | AB Specialty Silicones | Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers su...voir plus Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. voir moins | |
| Andisil 1170 Silane | AB Specialty Silicones | Andisil 1170 Silane is a bis(trimethoxysilylpropyl)amine amino silane. It is used as an adhesive and sealant. | |
| Andisil 1289 Silane | AB Specialty Silicones | Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent fo...voir plus Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent for rubbers. voir moins | |
| Andisil 151 Silane | AB Specialty Silicones | Andisil 151 Silane is a colorless, transparent liquid vinyl silane. It is a coupling agent in filled polymer systems. Andisil 151 Silane can also be used as a finish for glass or a binder additive in glass reinforced resins. | |
| Andisil 171 Silane | AB Specialty Silicones | Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhe...voir plus Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhesion between glass, mineral, and metal surfaces and provides elongation, flexibility, and spreading. voir moins | |
| Andisil 172 Silane | AB Specialty Silicones | Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion...voir plus Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion promoter in primers and coatings. voir moins | |
| Andisil 174 Silane | AB Specialty Silicones | Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinkin...voir plus Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinking agent, and blend additive. voir moins | |
| Andisil 187 Silane | AB Specialty Silicones | Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coating...voir plus Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coatings. voir moins | |
| Andisil 189 Silane | AB Specialty Silicones | Andisil 189 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 189 Silane improves adhesion to glass and metal surfaces. | |
| Andisil 1891 Silane | AB Specialty Silicones | Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as...voir plus Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as silica, clay, mica, and talc. voir moins | |
| Andisil 2100 Silane | AB Specialty Silicones | Andisil 2100 Silane is an aminopropylmethyldiethoxysilane coupling agent. This product is mainly used for foundry resins. | |
| Andisil 2120 Silane | AB Specialty Silicones | Andisil 2120 Silane is a diamino-functional silane that provides elongation, flexibility, and spreading at the interface as a coupling agent. It is used to improve adhesion between glass, mineral, and metal surface and aminoreactive resins. | |
| Andisil 6041 Silane | AB Specialty Silicones | Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be us...voir plus Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be used in waterborne systems and is suitable for many polymers. voir moins | |
| Andisil HMDZ | AB Specialty Silicones | Andisil HMDZ, chemical name hexamethyldisilazane, is a clear, colorless liquid. It can be used as a hydrophobing agent for inorganic fillers. Andisil HMDZ can be used as a protecting agent for OH and SH functionality. | |
| Andisil MOH 1,000 | AB Specialty Silicones | Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone ro...voir plus Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 10,000 | AB Specialty Silicones | Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone...voir plus Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 50,000 | AB Specialty Silicones | Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone...voir plus Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOS | AB Specialty Silicones | Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like met...voir plus Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil MT 9010 | AB Specialty Silicones | Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil OH 1,000 | AB Specialty Silicones | Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 14,000 | AB Specialty Silicones | Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 2,000 | AB Specialty Silicones | Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 20,000 | AB Specialty Silicones | Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 30 | AB Specialty Silicones | Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcaniz...voir plus Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 300,000 | AB Specialty Silicones | Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone roo...voir plus Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 3,500 | AB Specialty Silicones | Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 40 | AB Specialty Silicones | Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcan...voir plus Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 4,000 | AB Specialty Silicones | Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 50,000 | AB Specialty Silicones | Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 6,000 | AB Specialty Silicones | Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 70 | AB Specialty Silicones | Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulca...voir plus Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 750 | AB Specialty Silicones | Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperatur...voir plus Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 80,000 | AB Specialty Silicones | Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil POS | AB Specialty Silicones | Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like met...voir plus Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil TT 5050 | AB Specialty Silicones | Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive sub...voir plus Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VOS | AB Specialty Silicones | Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like meta...voir plus Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VT 6535 | AB Specialty Silicones | Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VT 8218 | AB Specialty Silicones | Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ESTISOL 140 | Esti Chem A/S | ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as...voir plus ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 150 | Esti Chem A/S | ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as...voir plus ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 165 | Esti Chem A/S | ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as...voir plus ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 170 | Esti Chem A/S | ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as...voir plus ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 180 | Esti Chem A/S | ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as...voir plus ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 240 | Esti Chem A/S | ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as...voir plus ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 242 | Esti Chem A/S | ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as...voir plus ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 260 | Esti Chem A/S | ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as...voir plus ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 295 | Esti Chem A/S | ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as...voir plus ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 300 | Esti Chem A/S | ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as...voir plus ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 305 | Esti Chem A/S | ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as...voir plus ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 312 | Esti Chem A/S | ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as...voir plus ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 390 | Esti Chem A/S | ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC...voir plus ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins |
