| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| Desmodur® BL 3272 MPA | Covestro | Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings w...voir plus Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings whose baking temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0 % DBTL, without influencing the storage stability of the ready-to-use formulation. voir moins | |
| Desmodur® BL 3370 MPA | Covestro | Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable o...voir plus Desmodur® BL 3370 PMA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It is used with hydroxyl functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 3370 MPA are used for the industrial finishing of appliances, coil coating, can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. voir moins | |
| Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...voir plus Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| Polyethylene Wax | BassTech International | Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms. | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. |
