UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
A-6165 Designer Molecules A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications.
A-675-100% Designer Molecules A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins
BLACK PEARLS® 4040 Cabot Corporation - Additives BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins
BLS® 0113-3 Mayzo, Inc. BLS® 0113-3 is a non-discoloring liquid light stabilization system. It has a broad spectrum absorbance of damaging UV radiation and provides excellent long term UV stability. BLS® 0113-3 is used in adhesives, sealants, and coatings.
BLS® 1328 Mayzo, Inc. BLS® 1328 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation, helping to preserve the original appearance and physical integrity. BLS® 1328 is used in organic pigments, ...voir plus BLS® 1328 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation, helping to preserve the original appearance and physical integrity. BLS® 1328 is used in organic pigments, protective coatings, automotive coating substrates, urethane solvents, thermosetting acrylic clear topcoats, and adhesives. voir moins
BLS® 1622 Mayzo, Inc. BLS® 1622 is a high molecular weight hindered amine light stabilizer. It has minimal interaction with co-additives such as pigments and other stabilizers and thus is highly effective in systems using carbon black and pigmented systems. BLS® 1622 is used i...voir plus BLS® 1622 is a high molecular weight hindered amine light stabilizer. It has minimal interaction with co-additives such as pigments and other stabilizers and thus is highly effective in systems using carbon black and pigmented systems. BLS® 1622 is used in adhesives and sealants. voir moins
BLS® 1710 Mayzo, Inc. BLS® 1710 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity. BLS® 1710 is used in adhesives and organ...voir plus BLS® 1710 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity. BLS® 1710 is used in adhesives and organic pigments. voir moins
BLS® 1770 Mayzo, Inc. BLS® 1770 is a hindered amine light stabilizer offering excellent protection against ultraviolet degradation. It is free-flowing, low dust, non-coloring, and thermally stable. BLS® 1770 is used in tapes.
BLS® 2908 Mayzo, Inc. BLS® 2908 is a benzoate-type light stabilizer that functions by scavenging free radicals formed during the photodegradation of plastic materials. It is non-discoloring and has low volatility. BLS® 2908 is used in tapes.
BLS® 3035 Mayzo, Inc. BLS® 3035 is a solid cyanoacrylate-type UV absorber (UVA) and light stabilizer. It is inherently non-discoloring and is also chemically non-interacting with reactive monomers and polymerization catalysts. BLS® 3035 is used in adhesives and coatings.
BLS® 3039 Mayzo, Inc. BLS® 3039 is a solid cyanoacrylate-type UV absorber (UVA) and light stabilizer. It is inherently non-discoloring and is also chemically non-interacting with reactive monomers and polymerization catalysts. BLS® 3039 is used in adhesives and coatings.
BLS® 531 Mayzo, Inc. BLS® 531 is an ultraviolet light absorber (UVA) of the benzophenone class, imparting good light stability. It offers low color contribution and retards yellowing and loss of physical properties. BLS® 531 is used in adhesives and sealants where light stabi...voir plus BLS® 531 is an ultraviolet light absorber (UVA) of the benzophenone class, imparting good light stability. It offers low color contribution and retards yellowing and loss of physical properties. BLS® 531 is used in adhesives and sealants where light stability is a concern. voir moins
BLS® 5411 Mayzo, Inc. BLS® 5411 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity of polymeric systems. BLS® 5411 is used i...voir plus BLS® 5411 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity of polymeric systems. BLS® 5411 is used in coatings (particularly thermo sets where low volatility is a concern), photographic products, sealants, and glazing materials for window lighting, signs, marine, and auto applications. voir moins
BLS® 783 Mayzo, Inc. BLS® 783 is a synergistic blend of the hindered amine light stabilizers BLS® 1622 and BLS® 1944. The product is highly effective to improve light stability. It is non-discoloring, has good compatibility with polyolefin substrates, and is highly resistant ...voir plus BLS® 783 is a synergistic blend of the hindered amine light stabilizers BLS® 1622 and BLS® 1944. The product is highly effective to improve light stability. It is non-discoloring, has good compatibility with polyolefin substrates, and is highly resistant to extraction. BLS® 783 is used in tapes. voir moins
BLS® 99-2 Mayzo, Inc. BLS® 99-2 is a liquid hydroxyphenyl-benzotriazole UV absorber. It provides outstanding light stability to many industrial and architectural coatings. This product blends easily and disperses completely resulting in lower loading requirements, virtually el...voir plus BLS® 99-2 is a liquid hydroxyphenyl-benzotriazole UV absorber. It provides outstanding light stability to many industrial and architectural coatings. This product blends easily and disperses completely resulting in lower loading requirements, virtually eliminating the particle dispersion problems associated with traditional powder UV absorbers. BLS® 99-2 is used in coatings and coating solvents. voir moins
BMI-1500 Designer Molecules BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-1700 Designer Molecules BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-3000 Designer Molecules BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-3000 GEL Designer Molecules BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-5000 Designer Molecules BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications.
BMI-5000 50% Toluene Designer Molecules BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications.
BNX® 1000 Mayzo, Inc. BNX® 1000 is a unique proprietary blended liquid antioxidant system. It provides ease in blending and should result in lower loading requirements since it disperses completely, virtually eliminating the particle dispersion problems associated with traditi...voir plus BNX® 1000 is a unique proprietary blended liquid antioxidant system. It provides ease in blending and should result in lower loading requirements since it disperses completely, virtually eliminating the particle dispersion problems associated with traditional powder antioxidants. BNX® 1000 is used in hot melt and water base adhesive systems. voir moins
BNX® 1010 Mayzo, Inc. BNX® 1010 is a high molecular weight hindered phenolic antioxidant. It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. This antioxi...voir plus BNX® 1010 is a high molecular weight hindered phenolic antioxidant. It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. This antioxidant also provides good compatibility with resins and excellent extraction resistance. BNX® 1010 can be used in a wide variety of organic substrates, including plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats. voir moins
BNX® 1037 Mayzo, Inc. BNX® 1037 is a high performance multifunctional antioxidant. This product has improved color stability and superior viscosity stability in hot melt adhesives after heat aging, is more effective prevention of skin formation in hot melt adhesives, and can b...voir plus BNX® 1037 is a high performance multifunctional antioxidant. This product has improved color stability and superior viscosity stability in hot melt adhesives after heat aging, is more effective prevention of skin formation in hot melt adhesives, and can be used without co-stabilizers due to its unique chemical structure. BNX® 1037 is used in hot melt adhesives based on unsaturated styrenic copolymers (SIS, SBS, SBR, etc.), solvent-based adhesives, water-based adhesives, unsaturated styrenic copolymers, and polyurethanes. voir moins
BNX® 1076 Mayzo, Inc. BNX® 1076 is a sterically hindered phenolic antioxidant. It is an effective, non-discoloring stabilizer that provides long-term heat stability by preventing thermo-oxidative degradation during processing and service life. This antioxidant is compatible wi...voir plus BNX® 1076 is a sterically hindered phenolic antioxidant. It is an effective, non-discoloring stabilizer that provides long-term heat stability by preventing thermo-oxidative degradation during processing and service life. This antioxidant is compatible with resins and extraction resistant. It can be used in a wide variety of organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats. voir moins
BNX® 1098 Mayzo, Inc. BNX® 1098 is a sterically hindered phenolic antioxidant. It is an efficient, extraction resistant, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. B...voir plus BNX® 1098 is a sterically hindered phenolic antioxidant. It is an efficient, extraction resistant, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. BNX® 1098 can be used in a wide variety of organic substrates such as plastics, synthetic fibers, elastomers, adhesives, and iseffective in polyamide polymers and fibers. voir moins
BNX® 1135 Mayzo, Inc. BNX® 1135 is a liquid hindered phenolic antioxidant. It is a primary antioxidant and an effective long-term thermal stabilizer. BNX® 1135 is used in adhesives, construction, molding, and automotive applications.
BNX® 1215 Mayzo, Inc. BNX® 1215 is a synergistic blend of the phenolic antioxidant BNX 1010 and the phosphite Benefos 1680 in a 1:2 ratio. This blend of both a primary and secondary antioxidant provides excellent heat stability and resistance to oxidation, with good compatibil...voir plus BNX® 1215 is a synergistic blend of the phenolic antioxidant BNX 1010 and the phosphite Benefos 1680 in a 1:2 ratio. This blend of both a primary and secondary antioxidant provides excellent heat stability and resistance to oxidation, with good compatibility with resins and low volatility. BNX® 1215 is useful as an antioxidant and processing stabilizer for other materials as well, including adhesives, elastomers, polyurethanes, styrenic polymers, and engineering plastics. voir moins
BNX® 1225 Mayzo, Inc. BNX® 1225 is a synergistic blend of 50% BNX® 1010 and 50% Benefos® 1680. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance. ...voir plus BNX® 1225 is a synergistic blend of 50% BNX® 1010 and 50% Benefos® 1680. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance. BNX® 1225 can be used in other polymers such as engineering plastics, styrene homo- and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates. voir moins
BNX® 1225 TPR Mayzo, Inc. BNX® 1225 TPR is a pelletized blend of BNX® 1225 and a SIS (styrene-isoprenestyrene) thermoplastic rubber. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility. BNX® 1225 TPR i...voir plus BNX® 1225 TPR is a pelletized blend of BNX® 1225 and a SIS (styrene-isoprenestyrene) thermoplastic rubber. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility. BNX® 1225 TPR is used in hot-melt pressure sensitive adhesives. voir moins
BNX® 1411 Mayzo, Inc. BNX® 1411 is a synergistic blend of the phenolic antioxidant BNX® 3114 and the phosphite Benefos® 1680 in a 1:1 ratio. This blend of both a primary and secondary antioxidant provides excellent heat stability and resistance to oxidation, with good compatib...voir plus BNX® 1411 is a synergistic blend of the phenolic antioxidant BNX® 3114 and the phosphite Benefos® 1680 in a 1:1 ratio. This blend of both a primary and secondary antioxidant provides excellent heat stability and resistance to oxidation, with good compatibility. BNX® 1411 is used in adhesives. voir moins
BNX® 1425 Mayzo, Inc. BNX® 1425 is a multifunctional additive that functions as an antioxidant for stabilization. This product is an effective esterification catalyst. It is non-discoloring, has excellent resistance to migration and extraction, and low-volatility during polyco...voir plus BNX® 1425 is a multifunctional additive that functions as an antioxidant for stabilization. This product is an effective esterification catalyst. It is non-discoloring, has excellent resistance to migration and extraction, and low-volatility during polycondensation and high temperature processing. BNX® 1425 is used in specialty adhesives. voir moins
BNX® 1900 Mayzo, Inc. BNX® 1900 is a synergistic blend of 20% BNX® 1076 and 80% Benefos® 1680. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance. B...voir plus BNX® 1900 is a synergistic blend of 20% BNX® 1076 and 80% Benefos® 1680. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance. BNX® 1900 is used in adhesives. voir moins
BNX® 2246 Mayzo, Inc. BNX® 2246 is a sterically hindered phenol antioxidant and thermal stabilizer. It provides effective stabilization in ABS, EVA, polypropylene and polyethylene. Typical applications include hot-melt adhesives, natural rubber adhesives, ABS, EVA, polypropyl...voir plus BNX® 2246 is a sterically hindered phenol antioxidant and thermal stabilizer. It provides effective stabilization in ABS, EVA, polypropylene and polyethylene. Typical applications include hot-melt adhesives, natural rubber adhesives, ABS, EVA, polypropylene and polyethylene. voir moins
BNX® 3052 Mayzo, Inc. BNX® 3052 is a multifunctional antioxidant containing both a hindered phenol and acrylate functionality. This material works by deactivating carbon-centered free radicals formed during thermal processing. It is generally most efficient in oxygen-deficient...voir plus BNX® 3052 is a multifunctional antioxidant containing both a hindered phenol and acrylate functionality. This material works by deactivating carbon-centered free radicals formed during thermal processing. It is generally most efficient in oxygen-deficient (i.e. anaerobic) conditions. BNX® 3052 is used in adhesives. voir moins
BNX® 358 Mayzo, Inc. BNX® 358 is a non-discoloring antioxidant useful for the stabilization of elastomers, plastics, adhesives, and lubricants. The product is also used as a disproportionation agent in the production of rosin esters. BNX® 358 is a highly effective antioxida...voir plus BNX® 358 is a non-discoloring antioxidant useful for the stabilization of elastomers, plastics, adhesives, and lubricants. The product is also used as a disproportionation agent in the production of rosin esters. BNX® 358 is a highly effective antioxidant for the stabilization of elastomers (especially EPDM and polybutadiene), polyolefins (especially in pipe and in wire & cable grades), styrenic polymers, PVC, hot melt adhesives, and in lubricants. voir moins
BNX® 3595 Mayzo, Inc. BNX® 3595 is a multifunctional antioxidant specially developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX® 3595 is also useful for the stabilization of hot melt...voir plus BNX® 3595 is a multifunctional antioxidant specially developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX® 3595 is also useful for the stabilization of hot melt adhesives (especially those derived from unsaturated elastomers) and rosin ester tackifier resins. voir moins
BNX® 5010 TPR Mayzo, Inc. BNX® 5010 TPR is a 50:50 blend of BNX® 1010 and SIS thermoplastic rubber in a pelletized form. It can be used with sigma mixers to achieve a more uniform dispersion of the antioxidant. It is an effective, non-discoloring stabilizer that provides excellent...voir plus BNX® 5010 TPR is a 50:50 blend of BNX® 1010 and SIS thermoplastic rubber in a pelletized form. It can be used with sigma mixers to achieve a more uniform dispersion of the antioxidant. It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. BNX® 5010 TPR is used in hot-melt pressure sensitive adhesives. voir moins
BNX® 8000 Mayzo, Inc. BNX® 8000 is an outstanding non-staining polymeric sterically hindered phenolic antioxidant, which is highly active and can be used at low concentrations. It provides superior protection to Neopreme based solution adhesives and has an extremely low volati...voir plus BNX® 8000 is an outstanding non-staining polymeric sterically hindered phenolic antioxidant, which is highly active and can be used at low concentrations. It provides superior protection to Neopreme based solution adhesives and has an extremely low volatility. BNX® 8000 is used in adhesives. voir moins
BNX® DSTDP Mayzo, Inc. BNX® DSTDP is a thioether-type antioxidant that functions by scavenging peroxides formed during the thermal oxidative degradation of plastics and other organic materials. It is non-discoloring, and has low odor and volatility. BNX® DSTDP is used in adhesi...voir plus BNX® DSTDP is a thioether-type antioxidant that functions by scavenging peroxides formed during the thermal oxidative degradation of plastics and other organic materials. It is non-discoloring, and has low odor and volatility. BNX® DSTDP is used in adhesives. voir moins
BNX® MD-1024 Mayzo, Inc. BNX® MD-1024 is a hindered phenolic antioxidant/metal deactivator used in reducing or preventing the harmful effect of copper or other metals upon various polymers. It has ease of compounding, and excellent extraction resistance to oil and aqueous media. ...voir plus BNX® MD-1024 is a hindered phenolic antioxidant/metal deactivator used in reducing or preventing the harmful effect of copper or other metals upon various polymers. It has ease of compounding, and excellent extraction resistance to oil and aqueous media. BNX® MD-1024 is used in hot melt and solution adhesives, polymer powder coatings, and other coatings on metals. voir moins
BNX® TAHQ Mayzo, Inc. BNX® TAHQ is a sterically hindered dihydroxybenzene antioxidant and stabilizer. It is non-staining and non-discoloring. BNX® TAHQ is used in unvulcanized rubber adhesives and tapes.
BNX™ 565 Mayzo, Inc. BNX™ 565 is a high molecular weight; non-staining, multifunctional antioxidant developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX™ 565 is useful for the stabi...voir plus BNX™ 565 is a high molecular weight; non-staining, multifunctional antioxidant developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX™ 565 is useful for the stabilization of hot melt adhesives (especially those derived from unsaturated elastomers) and rosin ester tackifier resins. voir moins
Benefos® 1618 Mayzo, Inc. Benefos® 1618 is a phosphite-type antioxidant for the stabilization of a wide range of plastics, elastomers, adhesives, and other substrates. This product is particularly useful to prevent the discoloration of polymers during melt processing operations, ...voir plus Benefos® 1618 is a phosphite-type antioxidant for the stabilization of a wide range of plastics, elastomers, adhesives, and other substrates. This product is particularly useful to prevent the discoloration of polymers during melt processing operations, including polyolefins, polyesters, styrene polymers, engineering plastics, elastomers, and adhesives. voir moins
Benefos® 1626 Mayzo, Inc. Benefos® 1626 is a phosphate type antioxidant of high phosphorous content and phosphate stabilizer. It provides excellent heat stability and reduction in polymer degradation during processing. This product is used in polyolefins and olefin copolymers, eng...voir plus Benefos® 1626 is a phosphate type antioxidant of high phosphorous content and phosphate stabilizer. It provides excellent heat stability and reduction in polymer degradation during processing. This product is used in polyolefins and olefin copolymers, engineering thermoplastics, PVC, elastomers, and adhesives. voir moins
Benefos® 1680 Mayzo, Inc. Benefos® 1680 is a phosphite type antioxidant of low volatility and is extremely resistant to hydrolysis. It provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance. Benefos® 1680 is use...voir plus Benefos® 1680 is a phosphite type antioxidant of low volatility and is extremely resistant to hydrolysis. It provides excellent heat stability and antioxidation, with good compatibility with resins and excellent extraction resistance. Benefos® 1680 is used in plastics and adhesives. voir moins
CAB-O-SIL® EH5 Cabot Corporation - Additives CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins
CAB-O-SIL® H5 Cabot Corporation - Additives CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins
CAB-O-SIL® LM150 Cabot Corporation - Additives CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins
CAB-O-SIL® M-5 Cabot Corporation - Additives CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins
CAB-O-SIL® TS530 Cabot Corporation - Additives CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins
CAB-O-SIL® TS610 Cabot Corporation - Additives CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins
CAB-O-SIL® TS622 Cabot Corporation - Additives CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins
CAB-O-SIL® TS720 Cabot Corporation - Additives CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins
CAB-O-SPERSE® 1030K Cabot Corporation - Additives CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins
CS-697 Designer Molecules CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins
CS-783 Designer Molecules CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications.
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
EC-1074 Designer Molecules EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins
EC-234 Designer Molecules EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins
EC-298 Designer Molecules EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins
EC-326 Designer Molecules EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins
EC-392 Designer Molecules EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications.
EC-861 Designer Molecules EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins
ECAT-243 Designer Molecules ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications.
ECAT-259 Designer Molecules ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins
ECAT-353 Designer Molecules ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins
ECAT-434 Designer Molecules ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins
Escoat® P-20 Liquid Mayzo, Inc. Escoat® P-20 Liquid is a non-silicone product. Its high degree of purity, quality and tight melting point range offers superior properties and performance to critical users. Escoat® P-20 Liquid is used in adhesives and tapes.
Escoat® P-20 Solids Mayzo, Inc. Escoat® P-20 Solids is a non-silicone product. Its high degree of purity, quality and tight melting point range offers superior properties and performance to critical users. Escoat® P-20 Solids is used in tapes and paper coatings.
Escoat® WFX 120 Release Coat Mayzo, Inc. Escoat® WFX 120 Release Coat is a non-silicone, acrylic water based emulsion, which provides consistent release characteristics. It has a glossy coating, is inkjet and print receptive, and offers an easy peel release. Escoat® WFX 120 Release Coat is used ...voir plus Escoat® WFX 120 Release Coat is a non-silicone, acrylic water based emulsion, which provides consistent release characteristics. It has a glossy coating, is inkjet and print receptive, and offers an easy peel release. Escoat® WFX 120 Release Coat is used in adhesives, coatings, and tapes. voir moins
Escoat® WPX 40 Release Coat Mayzo, Inc. Escoat® WPX 40 Release Coat is a non-silicone, carbohydrate polymer emulsion. It provides a moderate release performance. Escoat® WPX 40 Release Coat is used in coatings and adhesives.
HAITACK™ JH-3200 Mayzo, Inc. HAITACK™ is a premium aromatic modified aliphatic C5 hydrocarbon resin with narrow molecular weight distribution. It is a transparent light yellow solid and has a softening point of 92 Celsius. HAITACK™ JH-3200 is used in pressure sensitive hot melt adhes...voir plus HAITACK™ is a premium aromatic modified aliphatic C5 hydrocarbon resin with narrow molecular weight distribution. It is a transparent light yellow solid and has a softening point of 92 Celsius. HAITACK™ JH-3200 is used in pressure sensitive hot melt adhesives. voir moins
HAITACK™ JH-3201 Mayzo, Inc. HAITACK™ JH-3201 is a premium aliphatic C5 hydrocarbon resin with narrow molecular weight distribution. It is a transparent light yellow solid and has a softening point of 93 Celsius. HAITACK™ JH-3201 is used in adhesives.
HAITACK™ JH-3204 Mayzo, Inc. HAITACK™ JH-3204 is a premium aliphatic C5 hydrocarbon resin with narrow molecular weight distribution. It is a transparent light yellow solid and has a softening point of 99 Celsius. HAITACK™ JH-3204 is used in adhesives.
HAITACK™ JH‐3001 Mayzo, Inc. HAITACK™ JH‐3001 is a hydrocarbon resin. It avoids adhesion to compounding equipment, has lower hardness and modulus of compound after vulcanization, and improves extension performance. HAITACK™ JH‐3001 is used in pressure sensitive adhesives and hot melt...voir plus HAITACK™ JH‐3001 is a hydrocarbon resin. It avoids adhesion to compounding equipment, has lower hardness and modulus of compound after vulcanization, and improves extension performance. HAITACK™ JH‐3001 is used in pressure sensitive adhesives and hot melt adhesives. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
LX®-1035 Resin Neville Chemical Company LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.
LX®-2161 Resin Neville Chemical Company LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins
LX®-238 Resin Neville Chemical Company LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins
MM-204 Designer Molecules MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins
MM-211 Designer Molecules MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins
MM-220 Designer Molecules MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins
MM-281 Designer Molecules MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins
MM-290 Designer Molecules MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications.
MM-304 Designer Molecules MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins
NEVCHEM® 100 Neville Chemical Company NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins
NEVCHEM® 110 Neville Chemical Company NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins
NEVCHEM® 120 Neville Chemical Company NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 130 Neville Chemical Company NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins
NEVCHEM® 140 Neville Chemical Company NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 150 Neville Chemical Company NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins
NEVCHEM® 200 Neville Chemical Company NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins
NEVCHEM® 220 Neville Chemical Company NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins
NEVCHEM® 240 Neville Chemical Company NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins
NEVCHEM® 250 Neville Chemical Company NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins