A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
ABP-263 | Gelest, Incorporated | Amphiphilic silicone that has the ability to form stable water-in-oil emulsions allowing formulation of a wide range of gels and creams. | |
AKT-855 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
AKT853 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
AKT865 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
AKT867 | Gelest, Incorporated | Catalyst for silicone condensation RTV's. | |
ALT-143 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-173 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-192 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-213 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-233 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-251 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-263 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-292 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-563 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-652 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
AMS-132 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-152 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-162 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-233 | Gelest, Incorporated | Aminoethylaminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-242 | Gelest, Incorporated | Aminoethylaminoisobutylmethylsiloxane-dimethylsiloxane copolymer. | |
AQUAPHOBE™ CF | Gelest, Incorporated | Chlorine terminated polyfluoroalkylmethylsiloxane oligomer. The chlorines react with hydroxy and silanol groups of glass, siliceous surfaces and other metal oxide surfaces to form a chemically bound, low surface energy, fluorinated silicone surface. | |
AQUAPHOBE™ CM | Gelest, Incorporated | Chlorine terminated polydimethylsiloxane oligomer. The chlorines react with hydroxy and silanol groups of glass, siliceous surfaces and other metal oxide surfaces to form a chemically bound polydimethylsiloxane "siliconized" surface. | |
ATM-1112 | Gelest, Incorporated | Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer. | |
ATM-1322 | Gelest, Incorporated | Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer. | |
ATM-1322M50 | Gelest, Incorporated | Reactive silicone emulsion. | |
BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
Chlorez® 700 | Dover Chemical Corporation | Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, text...voir plus Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. Additionally, it can improve ancillary in various grades of rubber and shows excellent synergies with antimony trioxide. voir moins | |
Chlorez® 700-S | Dover Chemical Corporation | Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, t...voir plus Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. voir moins | |
Chloroflo 42 | Dover Chemical Corporation | Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used i...voir plus Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used in metal working applications as a straight or soluble oil for machining, drawing and stamping processes. Chloroflo 42 can be used in a variety of other applications including use as a flame retardant and plasticizer for paints and plastic production. voir moins | |
Chlorowax® 40 | Dover Chemical Corporation | Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers an...voir plus Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers and EP metalworking packages. Chlorowax 40 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
Chlorowax® 50 | Dover Chemical Corporation | Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited t...voir plus Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
CMS-222 | Gelest, Incorporated | (Carbinol functional) methylsiloxane-dimethylsiloxane copolymer. | |
CMS-626 | Gelest, Incorporated | (Carbinol functional) methylsiloxane-dimethylsiloxane copolymer. | |
CMS-832 | Gelest, Incorporated | (Hydroxyalkyl functional) methylsiloxane-(3,4-diethoxyphenylpropyl) methylsiloxane-dimethylsiloxane terpolymer. | |
CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
DA-8506 | Dover Chemical Corporation | DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
DA-8506XS | Dover Chemical Corporation | DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when addi...voir plus DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
DA-8527 | Dover Chemical Corporation | DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
DBE-224 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-621 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-712 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-814 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-821 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-C25 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
DBE-U12 | Gelest, Incorporated | Acryloxy terminated ethyleneoxide dimethylsiloxane-ethyleneoxide ABA block copolymer. | |
DBE-U22 | Gelest, Incorporated | Acryloxy terminated ethyleneoxide dimethylsiloxane-ethyleneoxide ABA block copolymer. | |
DBL-C31 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
DBP-534 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBP-732 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBP-C22 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
DES-T03 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T11 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T12 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T15 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T23 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DMS-A11 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A12 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A15 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A21 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A211 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
DMS-A214 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
DMS-A31 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A32 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A32R | Gelest, Incorporated | Reduced volatility grade aminopropyl terminated polydimethylsiloxane. | |
DMS-B12 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
DMS-B25 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
DMS-B31 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
DMS-C15 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
DMS-C16 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
DMS-C21 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
DMS-C23 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
DMS-D33 | Gelest, Incorporated | Diacetoxymethyl terminated polydimethylsiloxane. | |
DMS-E09 | Gelest, Incorporated | Epoxypropoxypropyl terminated polydimethylsiloxanes. | |
DMS-E11 | Gelest, Incorporated | Epoxypropoxypropyl terminated polydimethylsiloxane. | |
DMS-E12 | Gelest, Incorporated | Epoxypropoxypropyl terminated polydimethylsiloxane. | |
DMS-E21 | Gelest, Incorporated | Epoxypropoxypropyl terminated polydimethylsiloxane. | |
DMS-EC13 | Gelest, Incorporated | Epoxycyclohexylethyl terminated polydimethylsiloxane. | |
DMS-H03 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H11 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H21 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H25 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. |