| Acclaim® 8200 | Covestro | Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be use...voir plus Acclaim® 8200 polyol is a 8,000-molecular-weight diol based on propylene oxide. This high-performance, low- monol polyether is prepared with Bayer’s proprietary IMPACT® technology, using a patented organo-metallic propoxylation catalyst. It may be used in polyurethane and other applications, including cast elastomers, sealants, epoxy flexibilizers, defoamers, lubricants, crude oil de-emulsifiers, and plasticizers. As with any product, the use of Acclaim 8200 polyol in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Acclaim® Polyol 4200 | Covestro | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elast...voir plus Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur in the formulation of solvent-free or low-solvent polyurethanes. It is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Acclaim® Polyol 4200 can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Baybond® PU 130 | Covestro | Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...voir plus Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 330 | Covestro | Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...voir plus Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 401 A | Covestro | Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...voir plus Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® PU 402 A | Covestro | Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...voir plus Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability voir moins | |
| Baybond® PU 403 | Covestro | Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...voir plus Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. voir moins | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Bayhydrol® A 242 | Covestro | Bayhydrol® A 242 is a polyacrylic resin used as a coreactant for Bayhydur® and Desmodur® N polyisocyanates in the formulation of aqueous two component polyurethane systems for various applications by brush, roller or spray. | |
| Bayhydrol® HD 2016 | Covestro | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...voir plus Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. voir moins | |
| Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| Bayhydrol® PR 435 | Covestro | Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent. | |
| Bayhydrol® UV 2280 | Covestro | Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking,...voir plus Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1.0 to 2.5% by weight photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. voir moins | |
| Bayhydur® 304 | Covestro | Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol). | |
| Bayhydur® 305 | Covestro | Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is ...voir plus Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. voir moins | |
| Bayhydur® 401-70 | Covestro | Bayhydur® 401-70 is a water-dispersible polyisocyanate based on Isophorone Diisocyanate (IPDI) and dissolved in 1-methoxypropylacetate-2/xylene, 1:1. It is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol range. | |
| Bayhydur® BL XP 2706 | Covestro | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...voir plus Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. voir moins | |
| Bayhydur® XP 2547 | Covestro | Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...voir plus Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. voir moins | |
| Bayhydur® XP 2655 | Covestro | Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorpora...voir plus Bayhydur® XP 2655 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is used as a hardener for waterborne two-component polyurethane systems and a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. voir moins | |
| Bayhydur® XP 2700 | Covestro | Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...voir plus Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. voir moins | |
| Bayhytherm® 3146 | Covestro | Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. | |
| Baymedix® AR602 | Covestro | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
| Baymedix® CD102 | Covestro | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
| Baymedix® CD104 | Covestro | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
| Baymedix® FD103 | Covestro | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...voir plus Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. voir moins | |
| Desmodur® BL 3272 MPA | Covestro | Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings w...voir plus Desmodur® BL 3272 MPA is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in propylene glycol monomethyl ether acetate(MPA/PMA). It was developed as a hardener for lightfast one-pack baking polyurethane coatings whose baking temperature can be reduced by the addition of a catalyst, e.g. 0.3 - 1.0 % DBTL, without influencing the storage stability of the ready-to-use formulation. voir moins | |
| Desmodur® BL 3475 BA/SN | Covestro | Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack bakin...voir plus Desmodur® BL 3475 BA/SN is a blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI) and dissolved in n-butyl acetate and aromatic 100 (1:1). It was developed as a hardener for lightfast one-pack baking polyurethane coatings with a low baking temperature. Used in the formulation of high-quality industrial coatings, especially for cans and tubes. The product can also be used as an additive to improve the reactivity, flexibility and adhesion of conventional baking systems. voir moins | |
| Desmodur® BL 4265 SN | Covestro | Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relative...voir plus Desmodur® BL 4265 SN is a blocked aliphatic polyisocyanate based on isophorone diisocyanate (IPDI) and dissolved in aromatic 100. It is used with hydroxyl-functional coreactants in the formulation of light-stable one-component baking systems with relatively low curing temperatures. Coatings based on Desmodur® BL 4265 SN blocked polyisocyanate are used for the industrial finishing of appliances, coil coating, and can coating, and in the automotive industry for chip-resistant primer-surfacers and topcoats. voir moins | |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...voir plus Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. voir moins | |
| Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...voir plus Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. voir moins | |
| Desmodur® H | Covestro | Desmodur® H is a monomeric aliphatic diisocyanate. It is used mainly in the manufacture of polyisocyanates, for example, polyurethane coating raw materials. | |
| Desmodur® HL BA | Covestro | Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of...voir plus Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of coatings using Desmodur® HL BA are considerably shorter than those of coatings based on Desmodur® CB polyisocyanates and somewhat longer than those based on Desmodur® IL polyisocyanate. voir moins | |
| Desmodur® I | Covestro | Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...voir plus Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. voir moins | |
| Desmodur® IL 1451 | Covestro | Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is ...voir plus Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is most important in industrial wood and furniture finishing. voir moins | |
| Desmodur® IL BA | Covestro | Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coati...voir plus Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coatings based on Desmodur® IL BA lend themselves to applications requiring high production rates and fast dry-to-handle times. Wood coatings formulated with Desmodur® IL BA show quick sanding properties. The applied finishes show little tendency to run from sharp edges. voir moins | |
| Desmodur® IL EA | Covestro | Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used i...voir plus Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used in combination with various Baycoll® products or other hydroxyl-bearing substances to formulate adhesives. Because of its fast drying, Desmodur IL EA is mainly used in coatings for on-line applications, like the packaging industry or in industrial furniture finishing. voir moins | |
| Desmodur® L 67 BA | Covestro | Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-c...voir plus Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. Systems crosslinked with Desmodur® L 67 BA can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. voir moins | |
| Desmodur® L 67 MPA/X | Covestro | Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to ...voir plus Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to formulate air-drying twocomponent polyurethane coatings. Systems crosslinked with Desmodur® L 67 MPA/X can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. voir moins | |
| Desmodur® L 75 | Covestro | Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formul...voir plus Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings and adhesives. Systems crosslinked with Desmodur L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It is also suitable for room-temperature crosslinking of adhesives based on Desmocoll® or Baycoll®. These can be used to bond many materials,e.g. wood, metal and plastic. voir moins | |
| Desmodur® N 100 | Covestro | Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss...voir plus Desmodur® N 100 is a solvent-free, aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Recommended for use in two-component clear and pigmented interior and exterior finishes. Coatings based on Desmodur N 100, exhibit excellent gloss retention and weather resistance when formulated with proper hydroxyl-functional coreactants. These coatings also have very good resistance to solvents, chemicals, and abrasion. voir moins | |
| Desmodur® N 100A | Covestro | Desmodur® N 100A is a solvent-free, aliphatic polyisocyanate (HDI biuret). | |
| Desmodur® N 3200 | Covestro | Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suit...voir plus Desmodur® N 3200 is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Coatings formulated with Desmodur® N 3200 polyisocyanate show the same final properties as those based on Desmodur® N 100. It is particularly suitable for the formulation of high-solids two-component coating materials for a variety of applications. voir moins | |
| Desmodur® N 3200A | Covestro | Desmodur® N 3200A is a solvent free aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). | |
| Desmodur® N 3400 | Covestro | Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending ...voir plus Desmodur® N 3400 is a solvent free low viscosity aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Can be used as a hardener or reactive diluent for 100% solids, solvent-borne and aqueous, two-pack polyurethane coatings. Depending on the polyol used, the coatings yield tough but flexible films that can be either soft or extremely hard, have good resistance to chemicals and solvents, good weather stability and good resistance to abrasion. voir moins | |
| Desmodur® N 3600 | Covestro | Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemi...voir plus Desmodur® N 3600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate resin based on hexamethylene diisocyanate (HDI). Used primarily as the hardener component for light- fast two-pack polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. The main applications for systems based on Desmodur® N 3600 are air and force drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. voir moins | |
| Desmodur® N 3790 BA | Covestro | Desmodur® N 3790 BA is an aliphatic polyisocyanate (high functional HDI trimer) supplied at 90% solids in n-butyl acetate. Used primarily as the hardener component for lightfast two-pack polyurethane coatings with high resistance to chemicals and weatheri...voir plus Desmodur® N 3790 BA is an aliphatic polyisocyanate (high functional HDI trimer) supplied at 90% solids in n-butyl acetate. Used primarily as the hardener component for lightfast two-pack polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. The main applications for systems based on Desmodur® N 3790 BA are air and force-drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. voir moins | |
| Desmodur® N 3800 | Covestro | Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coa...voir plus Desmodur® N 3800 is a solvent free flexibilizing aliphatic polyisocyanate. In combination with suitable polyols, it can be used in the formulation of highly flexible coatings that are stable to accelerated and outdoor weathering. These can be used for coating plastics. The use of Desmodur® N 3800 as a combination hardener component makes it possible to adjust the flexibility of the polyol mill base. The product can also be used as a flexibilizing component in other applications, e.g. stone-chip protection systems, vehicle repair systems. voir moins | |
| Desmodur® N 75 MPA/X | Covestro | Desmodur® N 75 MPA/X is an aliphatic polyisocyanate that acts as the hardener component for lightfast polyurethane coating systems. | |
| Desmodur® W | Covestro | Desmodur® W is a liquid cycloaliphatic diisocyanate used as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. | |
| Desmodur® Z 4470 BA | Covestro | Desmodur® Z 4470 BA is an aliphatic polyisocyanate for use as the hardener component for lightfast polyurethane coating systems and as an additive resin for alkyd spray coatings. | |
| Desmodur® Z 4470 MPA/X | Covestro | Desmodur® Z 4470 MPA/X is an aliphatic polyisocyanate for use as the hardener component for lightfast polyurethane coating systems and as an additive resin for alkyd spray coatings. | |
| Desmodur® Z 4470 SN | Covestro | Desmodur® Z 4470 SN is an aliphatic polyisocyanate based on isophorone diisocyanate and dissolved in aromatic 100. Has better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crosslinking. | |
| Desmodur® Z 4470 SN/BA | Covestro | Desmodur® Z 4470 SN/BA is an aliphatic polyisocyanate based on isophorone diisocyanate dissolved in Aromatic 100 and n-butyl acetate. Better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crossl...voir plus Desmodur® Z 4470 SN/BA is an aliphatic polyisocyanate based on isophorone diisocyanate dissolved in Aromatic 100 and n-butyl acetate. Better solubility and compatibility. Mainly used as an additive resin to accelerate drying, curing and chemical crosslinking. voir moins | |
| Desmophen® 1300 BA | Covestro | Desmophen® 1300 BA is a polyester polyol. Form supplied is approximately 75% in butyl acetate. This polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used for clear and p...voir plus Desmophen® 1300 BA is a polyester polyol. Form supplied is approximately 75% in butyl acetate. This polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used for clear and pigmented finishes for wood, chipboard and hardboard. voir moins | |
| Desmophen® 1300 X | Covestro | Desmophen® 1300 X polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. Desmophen 1300 X is a polyester...voir plus Desmophen® 1300 X polyester is mainly used as the co-reactant for polyisocyanates in the formulation of fast-drying, two-pack coatings. They are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. Desmophen 1300 X is a polyester polyol, and the form supplied is approximately 75% in xylene. voir moins | |
| Desmophen® 631 MPA | Covestro | Desmophen® 631 MPA is a saturated polyester resin. | |
| Desmophen® 650 MPA | Covestro | Desmophen® 650 MPA is a branched, hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable, two-pack polyurethane coatings. | |
| Desmophen® 650A 65 PMA | Covestro | Desmophen® 650A 65 PMA is a saturated polyester resin that is used as a coreactant for Desmodur N polyisocyanates two-component polyurethane coatings. | |
| Desmophen® 651 MPA | Covestro | Desmophen® 651 MPA is a branched hydroxyl-bearing polyester used as a co-reactant, usually with Desmodur N 75, in the formulation of lightfast and weather-stable two-pack coatings. | |
| Desmophen® 670 BA | Covestro | Desmophen® 670 BA is a slightly branched, hydroxyl- bearing polyester. Form supplied is approximately 80% in butyl acetate. Desmophen® 670 BA is used primarily in the formulation of weather-stable flexible coatings. | |
| Desmophen® C 1200 | Covestro | Desmophen® C 1200 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 2,000. It is a solvent-free medium viscosity liquid used for binder for high-grade flexible coatings...voir plus Desmophen® C 1200 is a linear aliphatic polycarbonate polyester based on hexane diol-1,6 E-caprolactone with an average molecular weight of approximately 2,000. It is a solvent-free medium viscosity liquid used for binder for high-grade flexible coatings and sealers. Possible applications include decorative coatings, sealing compounds and joint sealants. voir moins | |
| Desmophen® C 2200 | Covestro | Desmophen® C 2200 is a linear hydroxyl-terminated, aliphatic polycarbonate diol with an average molecular weight of approximately 2,000. It is a polyurethane raw material for applications highly resistant to hydrolysis and hot air. It can be used as a co...voir plus Desmophen® C 2200 is a linear hydroxyl-terminated, aliphatic polycarbonate diol with an average molecular weight of approximately 2,000. It is a polyurethane raw material for applications highly resistant to hydrolysis and hot air. It can be used as a component of polyurethane dispersions, for thermoplastic polyurethanes, casting elastomers, textile coatings and adhesives. It is characterized by lightfastness and high resistance to hydrolysis and hot air. voir moins | |
| Desmophen® NH 1220 | Covestro | Desmophen® NH 1220 resin is a solvent-free, aminefunctional reactive partner for polyisocyanates, and is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® N...voir plus Desmophen® NH 1220 resin is a solvent-free, aminefunctional reactive partner for polyisocyanates, and is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1220 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/ urea clearcoats. voir moins | |
| Desmophen® NH 1420 | Covestro | Desmophen® NH 1420 resin is a solvent-free, amine-functional reactive partner for polyisocyanates, and is a low viscosity amine functional resin developed for use in the formulation of high solids two-component polyurethane/urea coatings. Desmophen® NH 14...voir plus Desmophen® NH 1420 resin is a solvent-free, amine-functional reactive partner for polyisocyanates, and is a low viscosity amine functional resin developed for use in the formulation of high solids two-component polyurethane/urea coatings. Desmophen® NH 1420 resin may be used by itself or as a blend with hydroxy-functional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/urea clearcoats. voir moins | |
| Desmophen® NH 1520 | Covestro | Desmophen® NH 1520 resin is an amine-functional used as a reactive partner for polyisocyanates. Desmophen® NH 1520 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea co...voir plus Desmophen® NH 1520 resin is an amine-functional used as a reactive partner for polyisocyanates. Desmophen® NH 1520 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1520 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/ urea clearcoats. voir moins | |
| Desmophen® NH 1521 | Covestro | Desmophen® NH 1521 resin is an amine-functional reactive partner for polyisocyanates, supplied with 10% n-butyl acetate. Desmophen® NH 1521 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component ...voir plus Desmophen® NH 1521 resin is an amine-functional reactive partner for polyisocyanates, supplied with 10% n-butyl acetate. Desmophen® NH 1521 resin is a low viscosity amine-functional resin developed for use in the formulation of high solids two component polyurethane/ polyurea coatings. Desmophen® NH 1521 resin may be used by itself or as a blend with hydroxyfunctional acrylic resins and crosslinked with an aliphatic polyisocyanate to yield high solids polyurethane/ urea clearcoats. voir moins | |
| Desmotherm® 2170 | Covestro | Desmotherm® 2170 is an aromatic, self-crosslinking, stoving urethane resin. Used as a binder for one-pack stoving polyurethane systems. | |
| Epoxies® 10-2055I | Epoxies, Etc. | Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I pro...voir plus Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. voir moins | |
| Epoxies® 10-2055P | Epoxies, Etc. | Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P pro...voir plus Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. voir moins | |
| Epoxies® 10-2055PHV | Epoxies, Etc. | Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV...voir plus Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotropic upon mixing. voir moins | |
| Epoxies® 10-2080I | Epoxies, Etc. | Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produc...voir plus Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. voir moins | |
| Epoxies® 10-2080P | Epoxies, Etc. | Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produc...voir plus Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. voir moins | |
| Epoxies® 10-2080PHV | Epoxies, Etc. | Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV pr...voir plus Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. voir moins | |
| Epoxies® 10-3002 | Epoxies, Etc. | Epoxies® 10-3002 is a clear, high bond strength, high viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handl...voir plus Epoxies® 10-3002 is a clear, high bond strength, high viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenience for the end user. 10-3002 yields high peel strength and excellent tensile strength with thermal shock, impact and vibration resistance. voir moins | |
| Epoxies® 10-3003 | Epoxies, Etc. | Epoxies® 10-3003 is a clear, high bond strength epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenien...voir plus Epoxies® 10-3003 is a clear, high bond strength epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenience for the end user. 10-3003 yields high peel strength and excellent tensile strength with thermal shock, impact and vibration resistance. voir moins | |
| Epoxies® 10-3004 NC | Epoxies, Etc. | Epoxies® 10-3004 NC is a clear, high bond strength, low viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in han...voir plus Epoxies® 10-3004 NC is a clear, high bond strength, low viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenience for the end user. 10-3004 NC yields high peel strength and excellent tensile strength with thermal shock, impact and vibration resistance. voir moins | |
| Epoxies® 10-3005 | Epoxies, Etc. | Epoxies® 10-3005 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water,...voir plus Epoxies® 10-3005 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3005 can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. voir moins | |
| Epoxies® 10-3005 NS | Epoxies, Etc. | Epoxies® 10-3005 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great...voir plus Epoxies® 10-3005 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3005 NS can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. voir moins | |
| Epoxies® 10-3008 | Epoxies, Etc. | Epoxies® 10-3008 is a two part, high performance structural epoxy adhesive made of a grey resin and a beige catalyst. It is a flexible adhesive with outstanding lap shear and peel strength and has a great choice for bonding substrates of differing coeffic...voir plus Epoxies® 10-3008 is a two part, high performance structural epoxy adhesive made of a grey resin and a beige catalyst. It is a flexible adhesive with outstanding lap shear and peel strength and has a great choice for bonding substrates of differing coefficients of thermal expansion. Epoxies® 10-3008 is well suited for applications requiring impact and vibration resistance. voir moins | |
| Epoxies® 10-3012 | Epoxies, Etc. | Epoxies® 10-3012 is a clear, high strength, fast setting epoxy adhesive and potting compound that is formulated for high clarity, good impact strength and water resistance. Epoxies® 10-3012 suited for a wide range of jewelry, industrial, structural and el...voir plus Epoxies® 10-3012 is a clear, high strength, fast setting epoxy adhesive and potting compound that is formulated for high clarity, good impact strength and water resistance. Epoxies® 10-3012 suited for a wide range of jewelry, industrial, structural and electrical applications. This adhesive is an excellent choice for field repairs. voir moins | |
| Epoxies® 10-3020 | Epoxies, Etc. | Epoxies® 10-3020 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water...voir plus Epoxies® 10-3020 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3020 can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. voir moins | |
| Epoxies® 10-3020 NS | Epoxies, Etc. | Epoxies® 10-3020 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with grea...voir plus Epoxies® 10-3020 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3020 NS can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. voir moins | |
| Epoxies® 10-3044 | Epoxies, Etc. | Epoxies® 10-3044 is a fast curing, two part epoxy adhesive and sealant with great chemical and heat resistance. It is widely used as a stencil and screen adhesive due to its bonding strength and toughness. Epoxies® 10-3044 is well suited to bond polyester...voir plus Epoxies® 10-3044 is a fast curing, two part epoxy adhesive and sealant with great chemical and heat resistance. It is widely used as a stencil and screen adhesive due to its bonding strength and toughness. Epoxies® 10-3044 is well suited to bond polyester mesh to aluminum frames and for the bonding of stainless steel foil to polyester mesh. voir moins | |
| Epoxies® 10-3046 | Epoxies, Etc. | Epoxies® 10-3046 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water...voir plus Epoxies® 10-3046 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3046 can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. voir moins | |
| Epoxies® 10-3046 NS | Epoxies, Etc. | Epoxies® 10-3046 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with grea...voir plus Epoxies® 10-3046 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3046 NS can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. voir moins | |
| Epoxies® 10-3062 | Epoxies, Etc. | Epoxies® 10-3062 is a two part epoxy potting compound and adhesive made of a clear resin and an amber curing agent. This product is well suited encapsulating electronics and electrical equipment and can provide good water resistance, adhesion, and toughne...voir plus Epoxies® 10-3062 is a two part epoxy potting compound and adhesive made of a clear resin and an amber curing agent. This product is well suited encapsulating electronics and electrical equipment and can provide good water resistance, adhesion, and toughness. voir moins | |
| Epoxies® 10-3216 | Epoxies, Etc. | Epoxies® 10-3216 is a toughened, flexible, and impact resistant epoxy adhesive. it is a two component system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 is excellent f...voir plus Epoxies® 10-3216 is a toughened, flexible, and impact resistant epoxy adhesive. it is a two component system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 is excellent for bonding many metals and woods, most plastics and rubbers and masonry products. This system is designed for electronic, aerospace and other demanding industrial applications. voir moins | |
| Epoxies® 10-3216 TR | Epoxies, Etc. | Epoxies® 10-3216 TR is a translucent, flexible, and impact resistant unfilled epoxy adhesive. It is a two part system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 TR is...voir plus Epoxies® 10-3216 TR is a translucent, flexible, and impact resistant unfilled epoxy adhesive. It is a two part system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 TR is excellent for bonding many metals and woods, most plastics and rubbers and masonry products. This system is designed for electronic, aerospace and other demanding industrial applications. voir moins | |
| Epoxies® 10-3713 | Epoxies, Etc. | Epoxies® 10-3713 is a two part, very strong and clear epoxy adhesive designed for a variety of bonding applications. Formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy it forms a crystal clear bond line. 10-3713 is...voir plus Epoxies® 10-3713 is a two part, very strong and clear epoxy adhesive designed for a variety of bonding applications. Formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy it forms a crystal clear bond line. 10-3713 is low in viscosity and therefore offers maximum wetting and penetration of substrates and is well suited to be used anywhere a clear, strong bond is required. voir moins | |
| Epoxies® 10-3782 | Epoxies, Etc. | Epoxies® 10-3782 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a very low viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, ma...voir plus Epoxies® 10-3782 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a very low viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic bonding applications. It can be used anywhere a tough indestructible bond is required. Epoxies® 10-3782 is well suited for use with a variety of substrates including metals, ceramics, wood, magnets, plastics, glass, etc. voir moins | |
| Epoxies® 10-3783 | Epoxies, Etc. | Epoxies® 10-3783 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a medium viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magn...voir plus Epoxies® 10-3783 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a medium viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic bonding applications. It can be used anywhere a tough indestructible bond is required. Epoxies® 10-3783 is well suited for use with a variety of substrates including metals, ceramics, wood, magnets, plastics, glass, etc. voir moins | |
| Epoxies® 10-3784 | Epoxies, Etc. | Epoxies® 10-3784 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated as a non-sag paste. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic ...voir plus Epoxies® 10-3784 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated as a non-sag paste. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic bonding applications. It can be used anywhere a tough indestructible bond is required. Epoxies® 10-3784 is well suited for use with a variety of substrates including metals, ceramics, wood, magnets, plastics, glass, etc. voir moins | |
| Epoxies® 20-3004 HV | Epoxies, Etc. | Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates incl...voir plus Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's high viscosity prevents sagging and is noncorrosive. voir moins | |
| Epoxies® 20-3004 LV | Epoxies, Etc. | Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates inclu...voir plus Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's low viscosity lends itself to being a self leveling system and is noncorrosive. voir moins | |
| Epoxies® 20-3064 NC | Epoxies, Etc. | Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3...voir plus Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. voir moins | |
| Epoxies® 20-3064 NC LV | Epoxies, Etc. | Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Sho...voir plus Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. voir moins | |
| Epoxies® 20-3068 | Epoxies, Etc. | Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with...voir plus Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with most electronics. 20-3068 Epoxy System meets the Food and Drug Administration (FDA) regulations permitting use in “indirect” food contact applications. The raw materials used in the products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections 175.105 and 175.300. voir moins |
