| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Milecell 60 HPMC | MPI Chemie B.V. | Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water ...voir plus Milecell 60 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 60 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. voir moins | |
| Milecell 65 HPMC | MPI Chemie B.V. | Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water ...voir plus Milecell 65 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 65 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. voir moins | |
| Milecell 75 HPMC | MPI Chemie B.V. | Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water ...voir plus Milecell 75 HPMC is hydroxy propyl methyl cellulose in the form of a white to slightly off-white fibrous or granular powder. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell 75 HPMC acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. voir moins | |
| Milecell EC Standard | MPI Chemie B.V. | Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and c...voir plus Milecell EC Standard is ethyl cellulose in the form of a white powder or granules. It is used as a cellulose ether additive in paint, adhesive, and printing industries. Milecell EC Standard acts as a thickener, water retention agent, suspension aid, and colloid protector in applications such as dispersion paints, inks, table coatings, wallpaper paste, and tile adhesives. voir moins | |
| R-1505 | NuSil Silicone Technology 1 | R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protect...voir plus R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protection from extremes in humidity, temperature, radiation, thermal stress and mechanical stress. It can also be utilized as a shielding for RFI and EMI in electronic applications. voir moins | |
| R-2182 | NuSil Silicone Technology 1 | R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone sub...voir plus R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best to apply by spraying or dipping. voir moins | |
| R-2188 | NuSil Silicone Technology 1 | R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high ...voir plus R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high power and planar packages. It can help protect against shock, vibration, moisture, contaminants and dust. The low viscosity of this elastomer will allow the potting of complex geometries, and it will not trap air. voir moins | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...voir plus R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. voir moins | |
| R-2637 | NuSil Silicone Technology 1 | R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-plac...voir plus R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-place conductive grounding connections and gaskets. It can also be used to adhere covers on housings that require a non-flowable to limited flow material. voir moins | |
| R-2655 | NuSil Silicone Technology 1 | R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where r...voir plus R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where radiation resistance, low temperature flexibility, oxidation and thermal stability are needed. The low viscosity of this elastomer allows for easy flow around complex parts and it provides exceptional shock and electrical insulation resistance. voir moins | |
| R-2930 | NuSil Silicone Technology 1 | R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a ...voir plus R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a non-flowable to limited flow material. It can also provide the transfer of heat between electrical/electronic components and their heat sinks. voir moins | |
| R-2939 | NuSil Silicone Technology 1 | R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is i...voir plus R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is ideally used as an adhesive for openings in modules and housings where grooves or other configurations require a non-flowable to limited flow material. voir moins | |
| R-2940 | NuSil Silicone Technology 1 | R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that ...voir plus R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that is non-flowable to a limited flow. It can also be used to provide heat transfer between electrical/electronic components and their heat sinks. voir moins | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...voir plus R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. voir moins | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...voir plus R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. voir moins | |
| SCV-2596 | NuSil Silicone Technology 1 | SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other confi...voir plus SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other configurations require a flowable to limited flow material. It features Ultra Low OutgassingTM which helps it perform under extreme operating conditions and helps avoid condensation in sensitive devices. voir moins | |
| SCV1-2599 | NuSil Silicone Technology 1 | SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, ...voir plus SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, base plates, heat sinks or where grooves require a non-flowable to limited flow material. voir moins | |
| SCV2-2590 | NuSil Silicone Technology 1 | SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of ...voir plus SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of electronic components. It will protect against extreme temperatures, humidity, radiation, thermal and mechanical stress. voir moins | |
| SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...voir plus SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. voir moins | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...voir plus SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. voir moins | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...voir plus SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. voir moins | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...voir plus SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. voir moins | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...voir plus SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. voir moins | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...voir plus SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. voir moins | |
| SP-271 | NuSil Silicone Technology 1 | SP-271 is a one component primer that is supplied in VM&P Naphtha and it requires no mixing. It is designed specifically to be used with platinum catalyzed, addition cured systems. This product can help improve the adhesion of platinum catalyzed, addition...voir plus SP-271 is a one component primer that is supplied in VM&P Naphtha and it requires no mixing. It is designed specifically to be used with platinum catalyzed, addition cured systems. This product can help improve the adhesion of platinum catalyzed, addition cured systems to polymethylmethacrylate (PMMA) as well as other various substrates such as glass, metals, ceramics, other silicone materials, and some plastics. voir moins | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...voir plus SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. voir moins | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. |
