| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| Brij™ C20 | Croda Coatings & Polymers | Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...voir plus Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| Brij™ L23 | Croda Coatings & Polymers | Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...voir plus Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| Brij™ L4 | Croda Coatings & Polymers | Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...voir plus Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| Brij™ S10 | Croda Coatings & Polymers | Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...voir plus Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. voir moins | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| Cirrasol G-1300 | Croda Coatings & Polymers | Cirrasol G-1300 is a POE-(100)-castor oil, ethoxylated triglyceride. It is used as an O/W (co-) emulsifier for waxes, oils, polysiloxanesalkyd resins and organic esters; as well as a polyurethane building block. | |
| Cirrasol G-265 | Croda Coatings & Polymers | Cirrasol G-265 is an oily liquid, anti-stat additive with effective anti-static behavior and good thermal stability. | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...voir plus Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. voir moins | |
| Crodamide EBO | Croda Coatings & Polymers | Crodamide EBO is a bis-amide anti-tag additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together...voir plus Crodamide EBO is a bis-amide anti-tag additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting. voir moins | |
| Crodamide EBS | Croda Coatings & Polymers | Crodamide EBS is a bis-amide anti-blocking additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick to...voir plus Crodamide EBS is a bis-amide anti-blocking additive used to prevent blocking and as anti-tack of adhesives. It is used to prevent the adhesive granulate from sticking together during storage, or to prevent adhesive film layers to attract dirt or stick together before application by reactivation or melting. voir moins | |
| Crodamide S | Croda Coatings & Polymers | Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pre...voir plus Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures. This product is used to prevent adhesive granulates from sticking together during storage at moderate and low temperatures. Crodamide S also prevents adhesive film layers to attract dirt or stick together before application by reactivation or melting. It can be incorporated directly into polymers to prevent any unwanted adhesion. The amide migrates fast to the surface of the material on cooling to form a non-sticking ‘release’ layer. It may be used in conjunction with organic additives such as talc to enhance performance. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| Maxemul™ 6106 | Croda Coatings & Polymers | Maxemul™ 6106 is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. | |
| Maxemul™ 6112 | Croda Coatings & Polymers | Maxemul™ 6112 is a non-migratory, anionic surfactant for superior emulsion stability in latex systems and excellent moisture resistance or adhesive properties in coatings or psa's. | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| Multiwet™ BD - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ BD - Multifunctional wetting agent is a non-silicone and non-fluorinated multifunctional surfactant. Multiwet BD offers excellent wetting of clean, unprepared or low energy substrates and is best in class for biodegradability. | |
| Multiwet™ EF - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ EF - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet EF offers excellent wetting with a very low critical micelle concentration and is the best in class for efficiency. | |
| Multiwet™ SO - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SO - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SO offers excellent wetting with a low VOC content and is best in class at solids wetting. | |
| Multiwet™ SU - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ SU - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet SU offers excellent wetting especially of clean and low energy substrates and is best in class for substrate wetting. | |
| Multiwet™ VE - Multifunctional Wetting Agent | Croda Coatings & Polymers | Multiwet™ VE - Multifunctional wetting agent is a non-silicone and non fluorinated multifunctional surfactant. Multiwet VE offers excellent wetting of clean, unprepared and low energy surfaces and is best in class for versatility. | |
| Pycal® 94 | Croda Coatings & Polymers | Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thi...voir plus Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thickening agents. voir moins | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| Synperonic™ 13/12 | Croda Coatings & Polymers | Synperonic™ 13/12 is a nonionic surfactant with good pigment wetting and emulsifying properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Synperonic™ 13/6 | Croda Coatings & Polymers | Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional...voir plus Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. voir moins | |
| Synperonic PE/F108 | Croda Coatings & Polymers | Synperonic PE/F108 is a ethoxylated polypropylene glycol MW 14000. It is used as a polymeric O/W emulsifier for polyester and epoxy resins with excellent dry film properties, dispersant for superior colloidal stability. | |
| Synperonic PE/F127 | Croda Coatings & Polymers | Synperonic PE/F127 is an ethoxylated polypropylene glycol MW 12000. It is used as a polymeric O/W emulsifier for polyester and epoxy resins with excellent dry film properties, solubilizer, and dispersant for superior colloidal stability. | |
| Synperonic PE/L101 | Croda Coatings & Polymers | Synperonic PE/L101 is an ethoxylated polypropylene glycol MW 3800. It is used as an effective defoamer and polyether polyol building block with enhanced reactivity. | |
| Synperonic PE/L31 | Croda Coatings & Polymers | Synperonic PE/L31 is an ethoxylated polypropylene glycol MW 1100. It is used as an effective defoamer and polyether polyol building block with enhanced reactivity. | |
| Synperonic PE/L61 | Croda Coatings & Polymers | Synperonic PE/L61 is an ethoxylated polypropylene glycol MW 2000. It is used as an effective defoamer and polyether polyol building block with enhanced reactivity. | |
| Synperonic PE/L64 | Croda Coatings & Polymers | Synperonic PE/L64 is an ethoxylated polypropylene glycol MW 2900. It is used as a polymeric emulsion stabilizer. | |
| Synperonic T/701 | Croda Coatings & Polymers | Synperonic T/701 is a liquid, alkoxylated ethylene diamine. It is an excellent cross-linker in PU systems improving water and solvent resistance. It also functions as a low foaming water soluble surfactant used in multiple applications as emulsifier or di...voir plus Synperonic T/701 is a liquid, alkoxylated ethylene diamine. It is an excellent cross-linker in PU systems improving water and solvent resistance. It also functions as a low foaming water soluble surfactant used in multiple applications as emulsifier or dispersant. voir moins | |
| Tween 20 | Croda Coatings & Polymers | Tween 20 is a liquid, POE-(20)-sorbitan monolaurate. It is used as a versatile dispersant, humectant, wetting agent, solubilizer, and O/W emulsifier for multiple applications. | |
| Tween 60 | Croda Coatings & Polymers | Tween 60 is a solid, POE-(20)-sorbitan monostearate. It is used as a low foam, dispersant, and O/W emulsifier. | |
| Zephrym PD 1000 | Croda Coatings & Polymers | Zephrym PD 1000 is a low VOC polymeric dispersant. It is used as a non VOC dispersant for inorganic particles in low polarity non-aqueous systems. | |
| Zephrym™ PD 2206 | Croda Coatings & Polymers | Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced di...voir plus Zephrym™ PD 2206 is a liquid, nonionic, polymeric pigment dispersant for enhanced color development. It is low VOC and provides excellent color development and improved dispersion stability both for aqueous and non-aqueous applications. It has enhanced dispersion of particles in low polarity solvent and resin systems. This product is well suited for both organic and inorganic pigments and fillers, as well as carbon black. It is FDA indirect food contact approved and provides excellent performance in liquid color for plastics. voir moins | |
| Zephrym™ PD 7000 | Croda Coatings & Polymers | Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dis...voir plus Zephrym™ PD 7000 is a liquid, cationic, polymeric pigment dispersant for enhanced color development. It is a versatile polymeric dispersant that can be used in aqueous and high polarity solvent or resin systems. This product is particularly suited for dispersion of carbon black, inorganic pigments and fillers, and for use in electronics and adhesives applications. voir moins |
