| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| 2-Propylheptanol | Perstorp | 2-Propylheptanol is a branched C10 fatty alcohol used as raw material for lubricants and acrylates in adhesives applications. | |
| A-6 Polyamine | Epoxy Chemicals, Inc. | A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adh...voir plus A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adhesion properties. It finds application in construction adhesives, hardened concrete adhesives, injection resin, and ASTM 881 resin systems. voir moins | |
| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| APR Polyamine | Epoxy Chemicals, Inc. | APR Polyamine is a clear liquid that functions as a fast setting amine curing agent with very low viscosity. This product has high strength and can be used as an AEP replacement. It is often used as an accelerator for other curing agents and in adhesives. | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...voir plus BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...voir plus Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. voir moins | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...voir plus Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. voir moins | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...voir plus Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. voir moins | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...voir plus Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. voir moins | |
| CRYSTAZENE 110 | DRT (Les Derives Resiniques et Terpeniques) | CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, a...voir plus CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, and for plastic film modification. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DERCOLYTE A 115 | DRT (Les Derives Resiniques et Terpeniques) | A tackifying resin especially recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERCOLYTE A 125 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE A 125 is a tackifying resin recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERCOLYTE LTG | DRT (Les Derives Resiniques et Terpeniques) | Issue de la polymérisation des terpènes, la DERCOLYTE LTG est une résine tackifiante de bas point de ramollissement, à faible taux de COV, recommandée pour plastifier et améliorer l’adhésion de certaines formules d’adhésifs sensibles à la pression. | |
| DERCOLYTE S 115 | DRT (Les Derives Resiniques et Terpeniques) | A tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
| DERCOLYTE S 125 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE S 125 is a tackifying resin recommended to improve the adhesive properties of solvent based adhesive formulations, particularly in PSA. It is produced from the polymerization of beta pinene. | |
| DERCOLYTE TS 105 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 105 is a very light colored tackifying resin showing excellent adhesive performances with block copolymers, especially in hot melt, pressure sensitive adhesives formulations. It is produced from the copolymerisation of terpene and styrene. | |
| DERCOLYTE TS 95 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 95 is produced from the polymerisation of terpene and styrene. It is a light coloured tackifying resin showing excellent adhesive performances with block copolymers. | |
| DERMULSENE 222 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on terpene and stabilized rosin ester. It is designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE DEG | DRT (Les Derives Resiniques et Terpeniques) | It is an aqueous, solvent free resin based on diethyleneglycol resin. | |
| DERMULSENE HBR 509 | DRT (Les Derives Resiniques et Terpeniques) | Le DERMULSENE HBR 509 est une dispersion sans solvant à base de colophane et de résine pétrolière. | |
| DERMULSENE HBR 70 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a hybrid rosin/hydrocarbon resin. It is designed specifically to tackify and wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE RA 702 | DRT (Les Derives Resiniques et Terpeniques) | DERMULSENE RA 702 is an aqueous, solvent free resin based on stabilized rosin. It is recommended for contact adhesives, building and industrial adhesives. | |
| DERMULSENE RE 802 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous, solvent free resin based on a stabilized rosin ester. It is designed specifically to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERMULSENE TR 602 | DRT (Les Derives Resiniques et Terpeniques) | An aqueous resin dispersion based on a terpene phenolic resin. It is specifically designed to tackify a wide range of acrylic, SBR and other water based synthetic or natural polymers. | |
| DERTOLINE G2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with glycerol. It is a tackifying resin particularly recommended for hot melt adhesives based on EVA or block copolymers. | |
| DERTOLINE P2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with pentaerythritol. It is a tackifying resin mainly recommended for hot melt adhesives based on EVA copolymers. | |
| DERTOLINE PLS | DRT (Les Derives Resiniques et Terpeniques) | A highly stabilized tall oil rosin esterified with pentaerythritol. It is a tackifying resin mainly suitable for hot melt adhesives based on EVA or block copolymers. | |
| DERTOPHENE H 150 | DRT (Les Derives Resiniques et Terpeniques) | DERTOPHENE H 150 is a terpene phenolic resin showing a high polarity. It is suitable for use in solvent based and hot melt based adhesives. | |
| DERTOPHENE T | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It is used to improve the properties of hot melt or solvent based adhesives. | |
| DERTOPHENE T 105 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It improves the properties of hot melt or solvent adhesives. | |
| DERTOPHENE T 115 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers. It is suitable for use in solvent based and hot melt based adhesives. | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| EFB Polyamine | Epoxy Chemicals, Inc. | EFB Polyamine is a light colored cycloaliphatic polyamine with low viscosity, virtually no odor, low benzyl alcohol content, water spot resistance, and blush resistance. This product is designed for use with non-diluted liquid epoxy resin and finds applic...voir plus EFB Polyamine is a light colored cycloaliphatic polyamine with low viscosity, virtually no odor, low benzyl alcohol content, water spot resistance, and blush resistance. This product is designed for use with non-diluted liquid epoxy resin and finds application in seamless epoxy flooring, coatings, and chemical resistant coatings. voir moins | |
| FB Polyamine | Epoxy Chemicals, Inc. | FB Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot, blush, and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use...voir plus FB Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot, blush, and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with bisphenol A epoxy resins, and acrylated/epoxy resins at room temperature. It finds application in color fast tile grouts, chemical resistant coatings, and seamless flooring. voir moins | |
| FB-25 Polyamine | Epoxy Chemicals, Inc. | FB-25 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with...voir plus FB-25 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in high solids coatings, chemical resistant coatings, and seamless flooring. voir moins | |
| FB-30 Polyamine | Epoxy Chemicals, Inc. | FB-30 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and ...voir plus FB-30 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in chemical resistant coatings and seamless flooring. voir moins | |
| FB-31 Polyamine | Epoxy Chemicals, Inc. | FB-31 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use wi...voir plus FB-31 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid A epoxy resins. It finds application in high solids coatings, chemical resistant coatings, and seamless flooring. voir moins | |
| FB-618 Polyamine | Epoxy Chemicals, Inc. | FB-618 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and...voir plus FB-618 Polyamine is a light colored cycloaliphatic curing agent with low viscosity, virtually no odor, good color stability, and water spot and chemical resistance. This product is compatible with most aliphatic and cycloaliphatic amine curing agents, and is intended for use with liquid and solid epoxy resins. It finds application in color fast tile grouts, chemical resistant coatings, and seamless flooring. voir moins | |
| FS-10 Polyamine | Epoxy Chemicals, Inc. | FS-10 Polyamine is an amine curing agent that does not contain benzyl alcohol, has low viscosity, ultra high strength, and virtually no odor. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative o...voir plus FS-10 Polyamine is an amine curing agent that does not contain benzyl alcohol, has low viscosity, ultra high strength, and virtually no odor. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or a reactive accelerator for existing resin systems. It is suitable for use in epoxy construction adhesives and flooring applications such as construction adhesives, injection resins, seamless trowel flooring, and hardened concrete adhesives. voir moins | |
| FS-1608 Polyamine | Epoxy Chemicals, Inc. | FS-1608 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactiv...voir plus FS-1608 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive accelerator with most amine curing agents for thermoset applications. It is used in construction adhesives, flooring, mortars, laminates, and low VOC coatings. voir moins | |
| FS-289 Polyamine | Epoxy Chemicals, Inc. | FS-289 Polyamine is an aliphatic polyamine that does not contain benzyl alcohol, has virtually no odor, low viscosity, high strength, and excellent damp adhesion. This product demonstrates thin film development, cures at low temperatures, and can be used ...voir plus FS-289 Polyamine is an aliphatic polyamine that does not contain benzyl alcohol, has virtually no odor, low viscosity, high strength, and excellent damp adhesion. This product demonstrates thin film development, cures at low temperatures, and can be used to accelerate other hardener systems to improve thin film cure. It is suitable for use in construction adhesives, injection resins, accelerated flooring systems, and hardened concrete adhesives. voir moins | |
| FS-290 Polyamine | Epoxy Chemicals, Inc. | FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener...voir plus FS-290 Polyamine is a modified polyamine that does not contain benzyl alcohol, nonyl phenol, or TMD, and has high strength and damp adhesion. This product demonstrates thin film development at low temperatures, and can be used to accelerate other hardener systems to improve thin film cure. It functions as a curing agent for liquid epoxy resins, and finds application in construction adhesives, solvent free high solids coatings, crack injection resins, accelerate flooring systems, and hardened concrete adhesives. voir moins | |
| FS-43 Polyamine | Epoxy Chemicals, Inc. | FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactiv...voir plus FS-43 Polyamine is a fast setting amine curing agent that does not contain benzyl alcohol, has virtually no odor, and damp adhesion. This product consists of 100% solids, exhibits rapid cure with low yellowing characteristics, and can be used as a reactive accelerator for polyamide, amidoamine, and cycloaliphatic amine curing agents. It is suitable for use in construction adhesives, injection resins, and hardened concrete adhesives. voir moins | |
| FS-56 Polyamine | Epoxy Chemicals, Inc. | FS-56 Polyamine is an accelerated hardener that does not contain benzyl alcohol, has no mercaptans, low viscosity, and ultra high strength. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or ...voir plus FS-56 Polyamine is an accelerated hardener that does not contain benzyl alcohol, has no mercaptans, low viscosity, and ultra high strength. This product cures at low temperatures and is intended for use with liquid epoxy resins as the primary curative or a reactive accelerator for existing resin systems. It is suitable for use in construction adhesives, injection resins, seamless flooring, and hardened concrete adhesives. voir moins | |
| FS-943 Polyamine | Epoxy Chemicals, Inc. | FS-943 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive...voir plus FS-943 Polyamine is an aliphatic amine adduct with mechanical properties, solvent and alcohol resistance, a fast cure rate, low viscosity, and ultra high strength. This product does not contain nonyl phenol or benzyl alcohol, and can be used as a reactive accelerator with most amine curing agents for thermoset applications. It is used in construction adhesives, flooring, mortars, laminates, and low VOC coatings. voir moins | |
| GRANOLITE G | DRT (Les Derives Resiniques et Terpeniques) | This is a light-colored and deodorised gum rosin esterified with glycerol. | |
| GRANOLITE G 105 | DRT (Les Derives Resiniques et Terpeniques) | Gum rosin esterified with glycerol, GRANOLITE G 105 is a light-colored and deodorised resin suitable in various adhesive applications. | |
| GRANOLITE P | DRT (Les Derives Resiniques et Terpeniques) | It is a light-colored and deodorised resin suitable in various adhesive and road marking Hot Melt formulations. | |
| GRANOLITE P 118 | DRT (Les Derives Resiniques et Terpeniques) | It is a pentaerythritol ester of rosin, showing a high softening point, mainly recommanded for Hot Melt formulations. | |
| GRANOLITE SG | DRT (Les Derives Resiniques et Terpeniques) | It is a glycerol ester of stabilized rosin, deodorized. | |
| GRANOLITE TEG | DRT (Les Derives Resiniques et Terpeniques) | A modified triethyleneglycol ester of rosin. It is used in adhesives, mainly for floor covering formulations. | |
| HCR 280 Polyamine | Epoxy Chemicals, Inc. | HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and ...voir plus HCR 280 Polyamine is a high performance PACM based cycloaliphatic curing agent for use with liquid epoxy resins. This product cures at low temperatures and has chemical, water spot, and amine blush resistance. It is phenol free and DOT non-corrosive, and can find application in industrial flooring, high-solids coatings, chemical resistant linings and mortars, and secondary containment linings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins | |
| n-Butanol | Perstorp | n-Butanol is a clear, colorless liquid acrylic monomer. This product provides flexibility and solubility and is used as direct solvent in coatings resins and dyes. | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins |
