| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MM-204 | Designer Molecules | MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as...voir plus MM-204 is a light tan liquid mono-functional acrylate monomer. This product features low viscosity, hydrolytically resistant, high glass transition temperature, diluent for thermoset resins, low cure shrinkage, and high Tg. MM-204 is most commonly used as a reactive diluent for UV or peroxide cured resins in coating or adhesive applications. voir moins | |
| MM-211 | Designer Molecules | MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting ...voir plus MM-211 is a light yellow powder terminated carboxylic acid. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-211 is most commonly used in synthetic resins and adhesion promoting applications. voir moins | |
| MM-220 | Designer Molecules | MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive...voir plus MM-220 is a light yellow liquid mono-acrylate monomer. This product features low weight loss on cure, helps reduce cure shrinkage, and low viscosity. MM-220 is most commonly used as a reactive diluent for UV or peroxide cured resins, coatings and adhesive applications. voir moins | |
| MM-281 | Designer Molecules | MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhes...voir plus MM-281 is a white to off white solid carboxylic acid. It is a useful intermediate for the synthesis of ester and amide linked thermoset monomers. This product features flexible aliphatic backbone, maleimide and carboxylic acid functional groups, and adhesion promoter. MM-281 is most commonly used in resins and adhesion promoter applications. voir moins | |
| MM-290 | Designer Molecules | MM-290 is a light tan liquid acrylate monomer. This product features lower weight loss on cure than Isobornyl Acrylate (IBOA), mild pleasant odor, and hydrolytic resistance. MM-290 is a most commonly used in hydrolytic resistance applications. | |
| MM-304 | Designer Molecules | MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance ap...voir plus MM-304 is a colorless liquid methacrylate monomer. This product features lower weight loss on cure than Isobornyl methacrylate (IBOMA), mild pleasant odor, hydrolytic resistance, and very low color. MM-304 is most commonly used in hydrolytic resistance applications. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| PEAM-1044 | Designer Molecules | PEAM-1044 is a amber liquid form polyester acrylate/methacrylate. This product features excellent adhesion, low warpage, and hydrophobicity. PEAM-1044 is most commonly used as an additive in base resin application. | |
| PEAM-1769 | Designer Molecules | PEAM-1769 is a amber liquid form polyester acrylate/methacrylate. This product exhibits excellent adhesion, low warpage, and hydrophobicity. PEAM-1769 is most commonly used as an additive in base oligomer application. | |
| PEAM-645 | Designer Molecules | PEAM-645 is an amber liquid form polyester acrylate/methacrylate. This product has very high thermal stability and low volatility. PEAM-645 is most commonly used as a base resin in adhesive and coating applications. | |
| PEM-1066 | Designer Molecules | PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly ...voir plus PEM-1066 light yellow liquid form polyester methacrylate that exhibits excellent adhesion, ultra low warpage, and hydrophobicity. This product features high thermal stability, low volatility, and excellent hydrolytic resistance. PEM-1066 is most commonly used in base resin applications. voir moins | |
| REAXIS® C114 | Reaxis Inc. | REAXIS® C114 is a versatile, liquid tin-based catalyst that is used in a number of applications including: esterifications, polyurethane coatings and resins. As well as aiding and improving the cure time of silicone resins and salines. | |
| REAXIS® C125 | Reaxis Inc. | REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can...voir plus REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can also be utilized either neat or as a mixture in alcohols. REAXIS® C125 is typically used at concentrations ranging from 0.01 - 0.20 wt%. voir moins | |
| REAXIS® C129LC | Reaxis Inc. | REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act ...voir plus REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act as a catalysis of lactone polymerization to form biodegradable polymers. REAXIS® C129LC can be utilized neat or as a mixture in alcohols. This product is typically used at concentrations ranging from 0.01 - 0.20 wt% at 80 - 240 °C. voir moins | |
| REAXIS® C154 | Reaxis Inc. | REAXIS® C154 is a white crystalline product that is used in the curing of thermoplastic elastomer. Made of Stannous Chloride Dihydrate, it is used in Sn/Pd activator formulations for POP. This product is also a preferred tin source for tin/nickel alloy pl...voir plus REAXIS® C154 is a white crystalline product that is used in the curing of thermoplastic elastomer. Made of Stannous Chloride Dihydrate, it is used in Sn/Pd activator formulations for POP. This product is also a preferred tin source for tin/nickel alloy plating and as a surface color modifier for art glass. voir moins | |
| REAXIS® C160 | Reaxis Inc. | REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activit...voir plus REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activity with minimal secondary reactions and colored by-products when compared to acid catalysts. REAXIS® C160 is non-corrosive and can be used at concentrations ranging from 0.01 - 0.2 wt% at 160 - 260°C. voir moins | |
| REAXIS® C162 | Reaxis Inc. | REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and sol...voir plus REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and solubility in polar solvents. It also finds use in Sn/Pd activator formulations for POP as well as a preferred tin source for tin/nickel alloy plating and as a surface color modifier for art glass. voir moins | |
| REAXIS® C188 | Reaxis Inc. | REAXIS® C188 is a free-flowing, dry black powder, of stable tin(II) oxide powder that has excellent catalytic properties for esterification reactions. This product is used at typical concentrations ranging from 0.01 - 0.20 wt% at 160 - 260°C. In addition...voir plus REAXIS® C188 is a free-flowing, dry black powder, of stable tin(II) oxide powder that has excellent catalytic properties for esterification reactions. This product is used at typical concentrations ranging from 0.01 - 0.20 wt% at 160 - 260°C. In addition, REAXIS® C188 is neutral and non-corrosive and can complete conversions with short reaction times due to its high catalytic activity. It has minimal secondary reactions and colored by-products when compared to other acid catalysts. And is very useful for oleochemical ester reactions. REAXIS® C188 is well suited for use in the metal finishing industry for tin and tin alloy plating processes. voir moins | |
| REAXIS® C208 | Reaxis Inc. | REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon reque...voir plus REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon request. voir moins | |
| REAXIS® C211 | Reaxis Inc. | REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extend...voir plus REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extended pot life and low color. voir moins | |
| REAXIS® C214 | Reaxis Inc. | REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) fo...voir plus REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) for most polyurethane systems, resulting in quicker cure times.In addition, REAXIS® C214 can be used in waterborne systems. voir moins | |
| REAXIS® C216 | Reaxis Inc. | REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C....voir plus REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C. Additional features and applications of REAXIS® C216 can be used as a catalysis for polyurethane reactions, curing of silicone resins, esterification and transesterification reactions and the production of silicone-modified polyethylenes. voir moins | |
| REAXIS® C218 | Reaxis Inc. | REAXIS® C218 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. This product is typically used at concentrations ranging from 0.01 - 1.0 wt% at 160 - 260°C. Additionally REAXIS® C218 c...voir plus REAXIS® C218 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. This product is typically used at concentrations ranging from 0.01 - 1.0 wt% at 160 - 260°C. Additionally REAXIS® C218 can be used as a catalysis for isocyanate/alcohol reactions, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and the production of saline modified polyethylenes voir moins | |
| REAXIS® C220 | Reaxis Inc. | REAXIS® C220 is a liquid catalyst that contains monobutyltin functionality. The main uses are in catalysis of esterification and polycondensation reactions. REAXIS® C220 is well suited for the production of plasticizers, catalysis of saturated and unsatur...voir plus REAXIS® C220 is a liquid catalyst that contains monobutyltin functionality. The main uses are in catalysis of esterification and polycondensation reactions. REAXIS® C220 is well suited for the production of plasticizers, catalysis of saturated and unsaturated polyesters. I can also improve the curing time of polyurethane based powder coatings. voir moins | |
| REAXIS® C221 | Reaxis Inc. | REAXIS® C221 is a versatile organotin catalyst that can be used in various silicone and polyurethane applications. REAXIS® C221 is well suited for use as a catalysis of urethanes where low color is required, esterification and transesterification reaction...voir plus REAXIS® C221 is a versatile organotin catalyst that can be used in various silicone and polyurethane applications. REAXIS® C221 is well suited for use as a catalysis of urethanes where low color is required, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and the production of saline modified polyethylenes. voir moins | |
| REAXIS® C223 | Reaxis Inc. | REAXIS® C223 is a yellowish liquid catalyst that is utilized suited for the synthesis of polyurethane systems, polycondensation reactions of RTV silicone resins and salines. REAXIS® 223 is also available in special formulations upon request. | |
| REAXIS® C225 | Reaxis Inc. | REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This produ...voir plus REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This product is used at concentrations ranging from 0.01 - 1.0 wt%. REAXIS® C225 is well suited for use as a catalysis of isocyanate/alcohol reactions, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and saline modified polyethylenes. voir moins | |
| REAXIS® C226 | Reaxis Inc. | REAXIS® C226 is a yellowish liquid catalyst that is well suited for the synthesis of polyurethane systems and the polycondensation reactions of RTV silicone resins and salines. REAXIS® C226 is also available in special formulations upon request. | |
| REAXIS® C227 | Reaxis Inc. | REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyureth...voir plus REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyurethane coatings. voir moins | |
| REAXIS® C228 | Reaxis Inc. | REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and...voir plus REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and crosslinking, silicone condensations and esterifications voir moins | |
| REAXIS® C232 | Reaxis Inc. | REAXIS® C232 is a solid, amorphous organotin catalyst that is well suited for esterification and transesterification reactions, polycondesation reactions and the production of polyester and alkyd resins. The toxicological properties of REAXIS® C232 are b...voir plus REAXIS® C232 is a solid, amorphous organotin catalyst that is well suited for esterification and transesterification reactions, polycondesation reactions and the production of polyester and alkyd resins. The toxicological properties of REAXIS® C232 are better compared to its dibutyltin counterparts. It is typically used at concentrations ranging from 0.01 - 0.5 wt%, depending on the application. voir moins | |
| REAXIS® C233 | Reaxis Inc. | REAXIS® C233 is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and salines as well as the production of poly...voir plus REAXIS® C233 is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and salines as well as the production of polycarbonate raw materials. REAXIS® C233 is slightly sensitive to moisture. It is typically used at concentrations ranging from 0.1 - 1.0 wt%. voir moins | |
| REAXIS® C233T | Reaxis Inc. | REAXIS® C233T is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and silanes as well as the production of pol...voir plus REAXIS® C233T is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and silanes as well as the production of polycarbonate raw materials. voir moins | |
| REAXIS® C248 | Reaxis Inc. | REAXIS® C248 is a solid, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248 is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the ...voir plus REAXIS® C248 is a solid, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248 is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the synthesis of alkyd and polyester resins, as well as the production of polycarbonates, electrodeposition coatings. REAXIS® C248 is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. voir moins | |
| REAXIS® C248D | Reaxis Inc. | REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acryl...voir plus REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the synthesis of alkyd and polyester resins, as well as the production of polycarbonates, electrodeposition coatings. REAXIS® C248D is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. voir moins | |
| REAXIS® C248LC | Reaxis Inc. | REAXIS® C248LC is a solid, low particle size, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. REAXIS® C248LC is well suited for the transesterification of vinyl acetate or acrylic acid copolymers as well ...voir plus REAXIS® C248LC is a solid, low particle size, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. REAXIS® C248LC is well suited for the transesterification of vinyl acetate or acrylic acid copolymers as well as the production of polycarbonates. In addition it can also be used for the electrodeposition coatings and the synthesis of alkyd and polyester resins. REAXIS® C248LC is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. voir moins | |
| REAXIS® C250 | Reaxis Inc. | REAXIS® C250 is a solid, amorphous organotin catalyst that is typically utilized in esterification and polycondensation reactions. REAXIS® C250 is well suited for the production of saturated and unsaturated polyester synthesis and alkyd resins. It can als...voir plus REAXIS® C250 is a solid, amorphous organotin catalyst that is typically utilized in esterification and polycondensation reactions. REAXIS® C250 is well suited for the production of saturated and unsaturated polyester synthesis and alkyd resins. It can also improve the curing time of silicone resins and salines. REAXIS® C250 is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 280°C. voir moins | |
| REAXIS® C256 | Reaxis Inc. | REAXIS® C256 is a solid white powder, which is an organotin based catalyst that is typically used in esterification and polycondensation reactions. Made of Monobutyltin Hydroxide Oxide it is typically used at concentrations ranging from 0.01 - 0.5 wt% at ...voir plus REAXIS® C256 is a solid white powder, which is an organotin based catalyst that is typically used in esterification and polycondensation reactions. Made of Monobutyltin Hydroxide Oxide it is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 280°C. REAXIS® C256 is well suited for use in saturated and unsaturated polyester synthesis, alkyd resin production and transesterification reactions. voir moins | |
| REAXIS® C311X | Reaxis Inc. | REAXIS® C311X is a light yellow liquid catalyst in xylene. The main use is for the catalysis of silicone and urethane CASE products. | |
| REAXIS® C317 | Reaxis Inc. | REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification a...voir plus REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification and transesterification reactions, isocyanate/alcohol reactions for urethane coatings as well as silicone condensation reactions, especially with RTV silicones. voir moins | |
| REAXIS® C318 | Reaxis Inc. | REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use ...voir plus REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use as a catalyst in the production of RTV silicone adhesives and sealants, polyurethane elastomers, polyurethane adhesive and sealants as well as polyurethane coatings. voir moins | |
| REAXIS® C319 | Reaxis Inc. | REAXIS® C319 is a yellowish liquid catalyst that is used in the synthesis and curing of polyurethanes. REAXIS® C319 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C321 | Reaxis Inc. | REAXIS® C321is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C321 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C322 | Reaxis Inc. | REAXIS® C322 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C322 is well suited for a more delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C325 | Reaxis Inc. | REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, pol...voir plus REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, polyurethane elastomers, adhesive and sealants and coatings. voir moins | |
| REAXIS® C333E50 | Reaxis Inc. | REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol...voir plus REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol. REAXIS® C333E50 can be supplied in other diluents. voir moins | |
| REAXIS® C333W50 | Reaxis Inc. | REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied a...voir plus REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied as a 50% active catalyst in water and can be supplied in other diluents. voir moins | |
| REAXIS® C416 | Reaxis Inc. | REAXIS® C416 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C416 provides for more of a delayed action cure and enhanced hydroltic stability compared to organotin carboxylates. | |
| REAXIS® C417 | Reaxis Inc. | REAXIS® C417 is a yellowish liquid catalyst based on dioctyltin oxide. REAXIS® C417 is used in the curing of silicone and saline systems and is well suited for the curing of alkoxy-based RTV silicones, oxime-based RTV silicones and MS Polymers. |
