| 205 | U.S. Zinc | 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...voir plus 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205H | U.S. Zinc | 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...voir plus 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205HSA | U.S. Zinc | 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...voir plus 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). voir moins | |
| 205L | U.S. Zinc | 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...voir plus 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205XL | U.S. Zinc | 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....voir plus 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. voir moins | |
| 210 | U.S. Zinc | 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...voir plus 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210E | U.S. Zinc | 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...voir plus 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210H | U.S. Zinc | 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...voir plus 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210HSA | U.S. Zinc | 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...voir plus 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. voir moins | |
| 210L | U.S. Zinc | 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...voir plus 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). voir moins | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...voir plus Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. voir moins | |
| Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...voir plus Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. voir moins | |
| Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
| Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
| AZO66 | U.S. Zinc | AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...voir plus AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| AZO66L | U.S. Zinc | AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...voir plus AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| AZO66XL | U.S. Zinc | AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...voir plus AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. voir moins | |
| AZO77H | U.S. Zinc | AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...voir plus AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). voir moins | |
| AZO77HSA | U.S. Zinc | AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...voir plus AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). voir moins | |
| BDT-1006 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where with...voir plus BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 377°C. voir moins | |
| BDT-1015 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withst...voir plus BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withstanding exposure to the hardest of conditions is paramount. BDT-1015 is also great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 372°C voir moins | |
| BDT-4330 | Bomar, formerly Dymax Oligomers & Coatings | BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where wit...voir plus BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 397° voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| BR-1041MB | Bomar, formerly Dymax Oligomers & Coatings | BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of bio based content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balance of toughness and flexibility. It has the ability to ad...voir plus BR-1041MB is a biobased polyether urethane methacrylate oligomer with a substantial amount of bio based content and is tin-free. This is a harder version of BR-1043MB. This oligomer has a good balance of toughness and flexibility. It has the ability to adhere to a variety of plastic substrates. The biobased backbone, methacrylate functionality, and tin-free nature make this an excellent choice for consumer applications with low irritancy. voir moins | |
| BR-1043MB | Bomar, formerly Dymax Oligomers & Coatings | BR-1043MB is a biobased polyether urethane methacrylate oligomer with a majority percentage of biobased content. This oligomer provides excellent low-temperature flexibility, elasticity, and excellent dynamic properties and rebound with a lower viscosity ...voir plus BR-1043MB is a biobased polyether urethane methacrylate oligomer with a majority percentage of biobased content. This oligomer provides excellent low-temperature flexibility, elasticity, and excellent dynamic properties and rebound with a lower viscosity versus similar polyether chemistries. The oligomer exhibits a higher degree of heat resistance vs other polyether oligomers. The high biobased backbone and methacrylate functionality make this an excellent candidate for consumer applications with low irritancy requirements. voir moins | |
| BR-116 | Bomar, formerly Dymax Oligomers & Coatings | BR-116 oligomer, a trifunctional aromatic polyether urethane methacrylate, is used in the manufacture of soft coatings and adhesives which are made to adhere to metals and glass. BR-116 offers superior bond strength and excellent reduction capabilities in...voir plus BR-116 oligomer, a trifunctional aromatic polyether urethane methacrylate, is used in the manufacture of soft coatings and adhesives which are made to adhere to metals and glass. BR-116 offers superior bond strength and excellent reduction capabilities in common monomers. voir moins | |
| BR-144B | Bomar, formerly Dymax Oligomers & Coatings | BR-144B, a medium molecular weight, trifunctional, aliphatic polyether urethane acrylate oligomer, offers the formulator a cost-effective means of obtaining high abrasion resistance and solvent resistance in a durable, high-gloss coating. While not limite...voir plus BR-144B, a medium molecular weight, trifunctional, aliphatic polyether urethane acrylate oligomer, offers the formulator a cost-effective means of obtaining high abrasion resistance and solvent resistance in a durable, high-gloss coating. While not limited to these fields, BR-144B is an effective choice in wood and furniture applications, along with abrasion-resistant overprint varnishes. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| BR-144H15 | Bomar, formerly Dymax Oligomers & Coatings | BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings...voir plus BR-144H15 is a trifunctional polyether urethane acrylate with excellent weather ability properties, fast cure speeds, and abrasion and solvent resistance. BR-144H15 is suitable for abrasion-resistant wood coatings, hydrolytically stable inks, and coatings requiring additional cure speed with multifunctional oligomers. voir moins | |
| BR-202 | Bomar, formerly Dymax Oligomers & Coatings | BR-202, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV coating applications. BR-202 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elong...voir plus BR-202, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV coating applications. BR-202 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elongation. BR-202 is also of value for its low initial color (despite its aromatic nature). voir moins | |
| BR-204 | Bomar, formerly Dymax Oligomers & Coatings | BR-204, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV adhesives applications. BR-204 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elo...voir plus BR-204, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV adhesives applications. BR-204 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elongation. BR-204 is also of value for its low initial viscosity and low color (despite its aromatic nature). voir moins | |
| BR-302 | Bomar, formerly Dymax Oligomers & Coatings | BR-302 is a linear aromatic urethane diacrylate, typically used in coatings and adhesives applications where yellowing constraints are not present. The backbone and aromatic content of BR-302 offer excellent chemical resistance and toughness, combined in ...voir plus BR-302 is a linear aromatic urethane diacrylate, typically used in coatings and adhesives applications where yellowing constraints are not present. The backbone and aromatic content of BR-302 offer excellent chemical resistance and toughness, combined in an affordable oligomer. voir moins | |
| BR-3042 | Bomar, formerly Dymax Oligomers & Coatings | BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-cura...voir plus BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-curable laminating adhesives. BR-3042 enhances adhesion and improves solvent resistance. voir moins | |
| BR-344 | Bomar, formerly Dymax Oligomers & Coatings | BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in fl...voir plus BR-344, a high molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a cost-effective choice for coatings formulations that require weathering durability and non-yellowing characteristics. Formulations with BR-344 result in flexible yet durable, abrasion-resistant, non-yellowing systems of moderate- to low-viscosity. voir moins | |
| BR-345 | Bomar, formerly Dymax Oligomers & Coatings | BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins ...voir plus BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins with less than 1000 cps can be formulated with this material when monomer levels are above 50%. voir moins | |
| BR-371B | Bomar, formerly Dymax Oligomers & Coatings | BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yiel...voir plus BR-371B, a low molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a great fit for coatings that require high tensile strength, superior hardness, scratch resistance, and weathering resistance. Formulations with BR-371B yield hard, clear, low-yellowing films. This is a reduced MEHQ version of BR-371S. voir moins | |
| BR-371MS | Bomar, formerly Dymax Oligomers & Coatings | BR-371MS, a low molecular weight, difunctional, aliphatic polyether urethane methacrylate oligomer, is a great fit for coatings that require high tensile strength, extremely low color, superior hardness, scratch resistance, and weathering resistance. BR-3...voir plus BR-371MS, a low molecular weight, difunctional, aliphatic polyether urethane methacrylate oligomer, is a great fit for coatings that require high tensile strength, extremely low color, superior hardness, scratch resistance, and weathering resistance. BR-371MS provides very low color and high viscosity, is ideal for hard gel nail coatings, and offers reduced heat generation vs other high tensile strength materials. voir moins | |
| BR-372 | Bomar, formerly Dymax Oligomers & Coatings | BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety...voir plus BR-372, a medium molecular weight, difunctional aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility with very low color. Formulations with BR-372 yield high clarity films with adhesion to a variety of plastics, and can also be used in the manufacture of UV-curable fiberglass matrix resins. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| BR-374 | Bomar, formerly Dymax Oligomers & Coatings | BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhes...voir plus BR-374, a medium molecular weight, difunctional, aliphatic polyether urethane acrylate oligomer, is a material offering a balance of toughness and flexibility, with very low color. Formulations with BR-374 yield high clarity films or tie layers with adhesion to a variety of substrates, making it ideal for laminating applications. voir moins | |
| BR-3741AJ | Bomar, formerly Dymax Oligomers & Coatings | BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adh...voir plus BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs). voir moins | |
| BR-3747AE | Bomar, formerly Dymax Oligomers & Coatings | BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (P...voir plus BR-3747AE is a difunctional, flexible, aliphatic polyether urethane acrylate. In addition to our typical substrates, BR-3747AE provides adhesion to variety of unusual substrates: polypropylene, high-density polyethylene (HDPE), and poly(vinyl chloride) (PVC). This unique product adheres well to a variety of metals, glass, and plastics. It is also an excellent candidate for consideration in UV light-curable PSA as a co-oligomer. voir moins | |
| BR-441BI20 | Bomar, formerly Dymax Oligomers & Coatings | BR-441BI20 is a fast-curing, high tensile strength, low molecular weight aliphatic polyester urethane acrylate with low color, high hardness, and excellent adhesion to plastic substrates. BR-441BI20 can be considered for use in high tensile strength overp...voir plus BR-441BI20 is a fast-curing, high tensile strength, low molecular weight aliphatic polyester urethane acrylate with low color, high hardness, and excellent adhesion to plastic substrates. BR-441BI20 can be considered for use in high tensile strength overprint varnishes, high tensile strength 3D printing resins, and low-yellowing coating. voir moins | |
| BR-5413MB | Bomar, formerly Dymax Oligomers & Coatings | BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candida...voir plus BR-5413MB is a difunctional aliphatic polyether urethane methacrylate with a good balance of high tensile strength and impact resistance. Formulating with linear monofunctional monomers can yield improved flexibility. This oligomer is an excellent candidate to consider for use in impact-resistant coatings and provides low color and excellent non-yellowing performance. voir moins | |
| BR-541MB | Bomar, formerly Dymax Oligomers & Coatings | BR-541MB is a difunctional aliphatic polyether urethane methacrylate. BR-541MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. This oligomer is an excellent candidate to consider for use...voir plus BR-541MB is a difunctional aliphatic polyether urethane methacrylate. BR-541MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. This oligomer is an excellent candidate to consider for use in impact-resistant coatings on various substrates when used with BR-543MB. This material has low skin sensitivity and is INCI registered for compliance in cosmetic applications. voir moins | |
| BR-541S | Bomar, formerly Dymax Oligomers & Coatings | BR-541S a difunctional, polyether urethane acrylate that is used for its desirable balance of toughness and flexibility. It adheres readily to a variety of substrates including cold rolled steel, glass, PC, and stainless steel. It is an excellent choice f...voir plus BR-541S a difunctional, polyether urethane acrylate that is used for its desirable balance of toughness and flexibility. It adheres readily to a variety of substrates including cold rolled steel, glass, PC, and stainless steel. It is an excellent choice for impact-resistant coatings. BR-541S is desirable for use in cosmetic applications where color stability and optically clear tough coatings are needed. voir moins | |
| BR-543 | Bomar, formerly Dymax Oligomers & Coatings | BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing ...voir plus BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings. voir moins | |
| BR-543MB | Bomar, formerly Dymax Oligomers & Coatings | BR-543MB is a difunctional aliphatic polyether urethane methacrylate. BR-543MB is an excellent candidate to consider for use in cosmetic applications. As a primary oligomer, BR-543MB offers excellent properties of adhesion and optical clarity. As a co-oli...voir plus BR-543MB is a difunctional aliphatic polyether urethane methacrylate. BR-543MB is an excellent candidate to consider for use in cosmetic applications. As a primary oligomer, BR-543MB offers excellent properties of adhesion and optical clarity. As a co-oligomer, BR-543MB can be used to improve an existing formulation’s glass adhesion. This product is listed in the INCI directory to meet cosmetic regulatory guidelines and has low skin sensitivity. voir moins | |
| BR-543TF | Bomar, formerly Dymax Oligomers & Coatings | BR-543TF is a difunctional aliphatic polyether urethane acrylate that is tin-free. Films formulated with BR-543TF exhibit superior physical and weathering capabilities. BR-543TF may also be used to improve the flexibility, weathering, and adhesion charact...voir plus BR-543TF is a difunctional aliphatic polyether urethane acrylate that is tin-free. Films formulated with BR-543TF exhibit superior physical and weathering capabilities. BR-543TF may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings. This product shows a high degree of crystallinity at room temperature. voir moins | |
| BR-551M | Bomar, formerly Dymax Oligomers & Coatings | BR-551M is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high...voir plus BR-551M is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high gloss and low APHA color impact. Furthermore, this oligomer was designed to meet regulatory expectations for salon applications in Europe. voir moins | |
| BR-551ME | Bomar, formerly Dymax Oligomers & Coatings | BR-551ME is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has hig...voir plus BR-551ME is an oligomer that provides excellent acetone removability when used in gel polish applications. Low heat generation occurs during cure with UV/LED lamps that are typically used in nail gel polish applications. The resultant coating also has high gloss, and low APHA color impact. Furthermore, this oligomer was designed to meet regulatory expectations for salon applications in Europe. voir moins | |
| BR-5541M | Bomar, formerly Dymax Oligomers & Coatings | BR-5541M is a flexible polyether urethane methacrylate oligomer diluted in 20% IBOA with a low modulus, good adhesion to a variety of substrates, and excellent elasticity. The high molecular weight of the backbone structure offers improved elasticity and ...voir plus BR-5541M is a flexible polyether urethane methacrylate oligomer diluted in 20% IBOA with a low modulus, good adhesion to a variety of substrates, and excellent elasticity. The high molecular weight of the backbone structure offers improved elasticity and rebound versus similar high elongation materials. The low modulus of the material allows for a high degree of flexibility comparable to silicone-based materials such as BRS-14320S, but with improved compatibility and surface cure. The compressibility of the material also offers potential usage in gasket and sealing applications. voir moins | |
| BR-571 | Bomar, formerly Dymax Oligomers & Coatings | BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with ...voir plus BR-571 is an aliphatic polyether urethane diacrylate with exceptionally low color. Based on a stable polyether backbone, BR-571 offers excellent physical properties in formulated films. While relatively high in neat viscosity, BR-571 reduces quickly with the addition of heat or monomer. Formulations using BR-571 often have a unique blend of toughness and flexibility. voir moins | |
| BR-571MB | Bomar, formerly Dymax Oligomers & Coatings | BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB als...voir plus BR-571MB, a difunctional, aliphatic polyether urethane methacrylate, is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. It is an excellent choice for impact-resistant coatings. BR-571MB also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. voir moins | |
| BR-581MT | Bomar, formerly Dymax Oligomers & Coatings | BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-...voir plus BR-581MT is an oligomer blend that provides a low-color, tack-free cure under low-intensity LED cure conditions. BR-581MT provides a balance of hardness and flexibility for abrasion resistance on flexible substrates, while also yielding a high-gloss, non-yellowing finish. This product is a resin blend containing 25% DEGDMA, is tin-free, is fully INCI listed, and can be formulated into a tack-free top coat for nail gel applications. For further recommendations on formulating nail applications, please see our sell sheet for a starting point formula. voir moins | |
| BR-5825I30 | Bomar, formerly Dymax Oligomers & Coatings | BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weath...voir plus BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weatherability. voir moins | |
| BR-582E8 | Bomar, formerly Dymax Oligomers & Coatings | BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact ...voir plus BR-582E8 is an aliphatic polyether urethane acrylate that provides a balance of toughness and flexibility. This oligomer is highly recommended for use in single-coat, flexible coatings on metal and plastic substrates. It is an excellent choice for impact and bend-resistant coatings. BR-582E8 also brings desirable weather resistance and low-yellowing properties to formulations utilizing it. voir moins | |
| BR-640D | Bomar, formerly Dymax Oligomers & Coatings | BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring t...voir plus BR-640D is a polybutadiene (PBD) urethane acrylate with a functionality of two. Designed to meet rigorous electronic applications, BR-640D has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-640D withstands the extremes of temperature typical of such tests, without undue degradation of properties. Excellent hydrophobic properties were exhibited where 0.012 and 0.037% water was absorbed by cured coating when submerged in water for 24 hours. In addition to the adhesion properties listed in the table below, BR-640D showed excellent adhesion to ABS, acrylic, nylon-6, PVC, and PS. voir moins | |
| BR-641D | Bomar, formerly Dymax Oligomers & Coatings | BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties t...voir plus BR-641D is a polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass, and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene, and Polypropylene. voir moins | |
| BR-641E | Bomar, formerly Dymax Oligomers & Coatings | BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to t...voir plus BR-641E is a polybutadiene urethane acrylate oligomer designed for rigorous electronic coating, flexible ink, and pressure-sensitive adhesive applications. This oligomer is also perfect for extremely low water absorption applications. It is resistant to thermal cycling and can withstand the temperature extremes typical of such tests without undue degradation of properties. voir moins | |
| BR-643 | Bomar, formerly Dymax Oligomers & Coatings | BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-...voir plus BR-643 is a polybutadiene (PBD) urethane acrylate. Designed to meet rigorous electronic applications, BR-643 has many desirable properties typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-643 withstands the extremes of temperature typical of such tests, without undue degradation of properties. voir moins | |
| BR-741 | Bomar, formerly Dymax Oligomers & Coatings | BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effec...voir plus BR-741 is a low molecular weight, difunctional aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to steel, aluminum, and various plastics with some amount of surface energy. The resulting hard, tough film makes an effective protective coating, which will be non-yellowing, due to the aliphatic backbone of BR-741. voir moins | |
| BR-741MD1 | Bomar, formerly Dymax Oligomers & Coatings | BR-741MD1 is an aliphatic, difunctional polyester urethane methacrylate offering excellent adhesion and flexibility. While not limited to these applications, BR-741MD1 is an effective choice in optically clear coatings and inks for plastics and metals. Th...voir plus BR-741MD1 is an aliphatic, difunctional polyester urethane methacrylate offering excellent adhesion and flexibility. While not limited to these applications, BR-741MD1 is an effective choice in optically clear coatings and inks for plastics and metals. This oligomer is also perfect for UV & LED nail gel coatings because this material has low skin sensitivity and is INCI listed. voir moins | |
| BR-742M | Bomar, formerly Dymax Oligomers & Coatings | BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nai...voir plus BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nail coating applications. It can also be effectively formulated for adhesion to steel, aluminum, and glass. Due to its low solvent resistance, it can be formulated into solvent strippable temporary coatings. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| BR-742MS | Bomar, formerly Dymax Oligomers & Coatings | BR-742MS is a variant of BR-742M with non-detectable (<10 ppm) MeHQ content to comply with regulatory requirements for both salon and retail nail coating applications in Europe. This oligomer has an excellent balance of gloss, low color, removability, dur...voir plus BR-742MS is a variant of BR-742M with non-detectable (<10 ppm) MeHQ content to comply with regulatory requirements for both salon and retail nail coating applications in Europe. This oligomer has an excellent balance of gloss, low color, removability, durability, and low heat generation during the cure process. voir moins | |
| BR-742S | Bomar, formerly Dymax Oligomers & Coatings | BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent f...voir plus BR-742S is a difunctional polyester urethane acrylate oligomer that offers good weather ability. High-impact-strength coatings and inks can be formulated that is non-yellowing and have a high gloss. This material offers low shrinkage, which is excellent for 3D printing applications. Furthermore, BR-742S is registered with INCI for cosmetic applications. voir moins | |
| BR-7432GB | Bomar, formerly Dymax Oligomers & Coatings | BR-7432GB, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications such as thermoforming resistant coatings where toughness and flexibility are required. BR-7432GB provides an exce...voir plus BR-7432GB, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications such as thermoforming resistant coatings where toughness and flexibility are required. BR-7432GB provides an excellent balance of weathering, solvent resistance, tensile strength, and adhesion properties. BR-7432GB is an incredibly tough, elastomeric material with similar mechanical performance to cast urethanes, and can provide excellent impact resistance and weatherability to formulations. BR-7432GB also has low MeHQ for nail gel polish applications. voir moins | |
| BR-7432GI30 | Bomar, formerly Dymax Oligomers & Coatings | BR-7432GI30, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications where excellent toughness and flexibility are required. The BR-7432GI30 backbone performs very well in extended...voir plus BR-7432GI30, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications where excellent toughness and flexibility are required. The BR-7432GI30 backbone performs very well in extended weatherability studies. It is an excellent choice for impact and bend resistant coatings, and can act as an impact modifier for composite applications. voir moins | |
| BR-744BT | Bomar, formerly Dymax Oligomers & Coatings | BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail ge...voir plus BR-744BT is an aliphatic difunctional polyester urethane acrylate offering excellent adhesion, toughness, and flexibility. BR-744BT provides excellent flexibility and high elongation to UV formulations and can provide impact and chip resistance to nail gel polishes. This material has low skin sensitivity for dental and cosmetic applications and is INCI listed. voir moins | |
| BR-744SD | Bomar, formerly Dymax Oligomers & Coatings | BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can...voir plus BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier and is a perfect choice for optically clear UV-PSAs. voir moins | |
| BR-771F | Bomar, formerly Dymax Oligomers & Coatings | BR-771F is a low molecular weight oligomer with a good balance of high tensile strength and moderate elongation with an excellent cure speed. BR-771F exhibits excellent adhesion to plastic substrates, particularly polycarbonate. Formulations made with BR-...voir plus BR-771F is a low molecular weight oligomer with a good balance of high tensile strength and moderate elongation with an excellent cure speed. BR-771F exhibits excellent adhesion to plastic substrates, particularly polycarbonate. Formulations made with BR-771F can exhibit superior toughness properties with a high Tg. Its inherently low color and aliphatic backbone make BR-771F an excellent candidate for polycarbonate coatings and adhesives. voir moins | |
| BR-930D | Bomar, formerly Dymax Oligomers & Coatings | BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkje...voir plus BR-930D is a trifunctional urethane acrylate oligomer that offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance, and durability. BR-930D is perfect for 3D printing applications using SLA, 3D inkjet, and DLP printers. voir moins | |
| BR-941 | Bomar, formerly Dymax Oligomers & Coatings | BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its exc...voir plus BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers. voir moins | |
| BR-952 | Bomar, formerly Dymax Oligomers & Coatings | BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is a...voir plus BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is also used in coatings for construction applications when improved toughness is desired for excellent durability. BR-952 provides an inherently high HDT of 143°C and a Tg of 153°C, and is inherently tin-free. voir moins | |
| BR-970BT | Bomar, formerly Dymax Oligomers & Coatings | BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance...voir plus BR-970BT is a low molecular weight, difunctional aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low-yellowing properties where premium performance is required. voir moins | |
| BR-970H | Bomar, formerly Dymax Oligomers & Coatings | BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has a high modulus and doesn't necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowin...voir plus BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has a high modulus and doesn't necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowing properties where premium performance is required. This oligomer is perfect for 2D and 3D inkjet applications as well as for use in graphic arts application. voir moins | |
| BR-990 | Bomar, formerly Dymax Oligomers & Coatings | BR-990, an aliphatic polyether urethane triacrylate, is a more flexible option from the BR-900 series of high-purity oligomers. BR-990 can be used effectively in performance coatings applications needing a greater degree of flexibility than is offered by ...voir plus BR-990, an aliphatic polyether urethane triacrylate, is a more flexible option from the BR-900 series of high-purity oligomers. BR-990 can be used effectively in performance coatings applications needing a greater degree of flexibility than is offered by higher functionality materials of the same product line. In addition, BR-990 offers one of the lowest viscosity profiles of any urethane acrylate. voir moins | |
| BRC-441D | Bomar, formerly Dymax Oligomers & Coatings | BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated i...voir plus BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications. voir moins | |
| BRC-4421 | Bomar, formerly Dymax Oligomers & Coatings | BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated ...voir plus BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture-sensitive or hydrophobic applications. voir moins | |
| BRC-443 | Bomar, formerly Dymax Oligomers & Coatings | BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substra...voir plus BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective low-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. voir moins | |
| BRC-443D | Bomar, formerly Dymax Oligomers & Coatings | BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substr...voir plus BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene. voir moins | |
| BRC-841 | Bomar, formerly Dymax Oligomers & Coatings | BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The l...voir plus BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastic hard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The low water absorption and alkaline resistance make BRC-841 ideal for the following industries: aerospace, automotive, appliances, cosmetic, electronic, industrial, medical devices, metal finishing, and UV-curable inks and coatings. voir moins | |
| BRC-843 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substr...voir plus BRC-843 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single-coating that extends the substrates use-life. The low water absorption and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic, electronic, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-843 exhibits retention of mechanical properties after exposure to high temperatures (200°C for 30 minutes). In addition to the adhesion properties listed in the table below, BRC-843 also shows excellent adhesion to ABS, PVC, PMMA, and polystyrene. voir moins | |
| BRC-8430E | Bomar, formerly Dymax Oligomers & Coatings | BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellen...voir plus BRC-8430E is a reduced-functionality version of BRC-843S that provides improved flexiblity and reduced modulus compared with BRC-843S. The hydrophobic and temperature resistant backbone of BRC-8430E combined with the low modulus make BRC-8430E an excellent candidate for moisture resistant adhesives, coatings, and resins, as well as formulations that need to pass autoclave or 85/85 testing. voir moins | |
| BRC-843S | Bomar, formerly Dymax Oligomers & Coatings | BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the subst...voir plus BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. voir moins | |
| BRC-843SD1 | Bomar, formerly Dymax Oligomers & Coatings | BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the subs...voir plus BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the substrates use-life. BRC-843SD1 is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device. voir moins | |
| BRS-14320S | Bomar, formerly Dymax Oligomers & Coatings | BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S ...voir plus BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications. voir moins | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins |
