UL Prospector
Prospector

Succès!

Vous avez enregistré votre recherche avec succès
673 Résultats
A-6165 Designer Molecules A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications.
A-675-100% Designer Molecules A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins
ABP-263 Gelest, Incorporated Amphiphilic silicone that has the ability to form stable water-in-oil emulsions allowing formulation of a wide range of gels and creams.
AKT-855 Gelest, Incorporated Titanate catalyst for alkoxy and oxime neutral cure RTV's.
AKT853 Gelest, Incorporated Titanate catalyst for alkoxy and oxime neutral cure RTV's.
AKT865 Gelest, Incorporated Titanate catalyst for alkoxy and oxime neutral cure RTV's.
AKT867 Gelest, Incorporated Catalyst for silicone condensation RTV's.
ALT-143 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-173 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-192 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-213 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-233 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-251 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-263 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-292 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-563 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
ALT-652 Gelest, Incorporated Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes.
AMS-132 Gelest, Incorporated Aminopropylmethylsiloxane-dimethylsiloxane copolymer.
AMS-152 Gelest, Incorporated Aminopropylmethylsiloxane-dimethylsiloxane copolymer.
AMS-162 Gelest, Incorporated Aminopropylmethylsiloxane-dimethylsiloxane copolymer.
AMS-233 Gelest, Incorporated Aminoethylaminopropylmethylsiloxane-dimethylsiloxane copolymer.
AMS-242 Gelest, Incorporated Aminoethylaminoisobutylmethylsiloxane-dimethylsiloxane copolymer.
AnTec MM Anpeak Specialty Minerals Co., Ltd. AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies...voir plus AnTec MM, in the form of a highly pulverized powder, is a high-reactivity metakaolin Pozzolan. This product can be used as an admixture in mortars and grouts, as well as in concrete masonry units or other cement-based products. Its specific gravity lies between 2.5 and 2.7, and it contains less than .5% free moisture. voir moins
AQUAPHOBE™ CF Gelest, Incorporated Chlorine terminated polyfluoroalkylmethylsiloxane oligomer. The chlorines react with hydroxy and silanol groups of glass, siliceous surfaces and other metal oxide surfaces to form a chemically bound, low surface energy, fluorinated silicone surface.
AQUAPHOBE™ CM Gelest, Incorporated Chlorine terminated polydimethylsiloxane oligomer. The chlorines react with hydroxy and silanol groups of glass, siliceous surfaces and other metal oxide surfaces to form a chemically bound polydimethylsiloxane "siliconized" surface.
ATM-1112 Gelest, Incorporated Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer.
ATM-1322 Gelest, Incorporated Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer.
ATM-1322M50 Gelest, Incorporated Reactive silicone emulsion.
BLACK PEARLS® 4040 Cabot Corporation - Additives BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins
BMI-1500 Designer Molecules BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-1700 Designer Molecules BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-3000 Designer Molecules BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-3000 GEL Designer Molecules BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-5000 Designer Molecules BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications.
BMI-5000 50% Toluene Designer Molecules BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications.
CAB-O-SIL® EH5 Cabot Corporation - Additives CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins
CAB-O-SIL® H5 Cabot Corporation - Additives CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins
CAB-O-SIL® LM150 Cabot Corporation - Additives CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins
CAB-O-SIL® M-5 Cabot Corporation - Additives CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins
CAB-O-SIL® TS530 Cabot Corporation - Additives CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins
CAB-O-SIL® TS610 Cabot Corporation - Additives CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins
CAB-O-SIL® TS622 Cabot Corporation - Additives CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins
CAB-O-SIL® TS720 Cabot Corporation - Additives CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins
CAB-O-SPERSE® 1030K Cabot Corporation - Additives CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins
CMS-222 Gelest, Incorporated (Carbinol functional) methylsiloxane-dimethylsiloxane copolymer.
CMS-626 Gelest, Incorporated (Carbinol functional) methylsiloxane-dimethylsiloxane copolymer.
CMS-832 Gelest, Incorporated (Hydroxyalkyl functional) methylsiloxane-(3,4-diethoxyphenylpropyl) methylsiloxane-dimethylsiloxane terpolymer.
CS-697 Designer Molecules CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins
CS-783 Designer Molecules CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications.
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
DBE-224 Gelest, Incorporated Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier.
DBE-621 Gelest, Incorporated Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier.
DBE-712 Gelest, Incorporated Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier.
DBE-814 Gelest, Incorporated Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier.
DBE-821 Gelest, Incorporated Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier.
DBE-C25 Gelest, Incorporated Carbinol (hydroxyl) terminated polydimethylsiloxane.
DBE-U12 Gelest, Incorporated Acryloxy terminated ethyleneoxide dimethylsiloxane-ethyleneoxide ABA block copolymer.
DBE-U22 Gelest, Incorporated Acryloxy terminated ethyleneoxide dimethylsiloxane-ethyleneoxide ABA block copolymer.
DBL-C31 Gelest, Incorporated Carbinol (hydroxyl) terminated polydimethylsiloxane.
DBP-534 Gelest, Incorporated Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier.
DBP-732 Gelest, Incorporated Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier.
DBP-C22 Gelest, Incorporated Carbinol (hydroxyl) terminated polydimethylsiloxane.
DES-T03 Gelest, Incorporated Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes.
DES-T11 Gelest, Incorporated Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes.
DES-T12 Gelest, Incorporated Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes.
DES-T15 Gelest, Incorporated Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes.
DES-T23 Gelest, Incorporated Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes.
DMS-A11 Gelest, Incorporated Aminopropyl terminated polydimethylsiloxane.
DMS-A12 Gelest, Incorporated Aminopropyl terminated polydimethylsiloxane.
DMS-A15 Gelest, Incorporated Aminopropyl terminated polydimethylsiloxane.
DMS-A21 Gelest, Incorporated Aminopropyl terminated polydimethylsiloxane.
DMS-A211 Gelest, Incorporated N-ethylaminoisobutyl terminated polydimethylsiloxane.
DMS-A214 Gelest, Incorporated N-ethylaminoisobutyl terminated polydimethylsiloxane.
DMS-A31 Gelest, Incorporated Aminopropyl terminated polydimethylsiloxane.
DMS-A32 Gelest, Incorporated Aminopropyl terminated polydimethylsiloxane.
DMS-A32R Gelest, Incorporated Reduced volatility grade aminopropyl terminated polydimethylsiloxane.
DMS-B12 Gelest, Incorporated (Carboxyalkyl) terminated polydimethylsiloxane.
DMS-B25 Gelest, Incorporated (Carboxyalkyl) terminated polydimethylsiloxane.
DMS-B31 Gelest, Incorporated (Carboxyalkyl) terminated polydimethylsiloxane.
DMS-C15 Gelest, Incorporated Carbinol (hydroxyl) terminated polydimethylsiloxane.
DMS-C16 Gelest, Incorporated Carbinol (hydroxyl) terminated polydimethylsiloxane.
DMS-C21 Gelest, Incorporated Carbinol (hydroxyl) terminated polydimethylsiloxane.
DMS-C23 Gelest, Incorporated Carbinol (hydroxyl) terminated polydimethylsiloxane.
DMS-D33 Gelest, Incorporated Diacetoxymethyl terminated polydimethylsiloxane.
DMS-E09 Gelest, Incorporated Epoxypropoxypropyl terminated polydimethylsiloxanes.
DMS-E11 Gelest, Incorporated Epoxypropoxypropyl terminated polydimethylsiloxane.
DMS-E12 Gelest, Incorporated Epoxypropoxypropyl terminated polydimethylsiloxane.
DMS-E21 Gelest, Incorporated Epoxypropoxypropyl terminated polydimethylsiloxane.
DMS-EC13 Gelest, Incorporated Epoxycyclohexylethyl terminated polydimethylsiloxane.
DMS-H03 Gelest, Incorporated Hydride terminated polydimethylsiloxane.
DMS-H11 Gelest, Incorporated Hydride terminated polydimethylsiloxane.
DMS-H21 Gelest, Incorporated Hydride terminated polydimethylsiloxane.
DMS-H25 Gelest, Incorporated Hydride terminated polydimethylsiloxane.
DMS-H31 Gelest, Incorporated Hydride terminated polydimethylsiloxane.
DMS-H41 Gelest, Incorporated Hydride terminated polydimethylsiloxane.
DMS-K05 Gelest, Incorporated Chlorine terminated polydimethylsiloxane.
DMS-K13 Gelest, Incorporated Chlorine terminated polydimethylsiloxane.
DMS-K26 Gelest, Incorporated Chlorine terminated polydimethylsiloxane.
DMS-L21 Gelest, Incorporated Chloromethyl terminated polydimethylsiloxane.
DMS-N05 Gelest, Incorporated Dimethylamino terminated polydimethylsiloxane.