UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
A-6165 Designer Molecules A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications.
A-675-100% Designer Molecules A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins
BLACK PEARLS® 4040 Cabot Corporation - Additives BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins
BMI-1500 Designer Molecules BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-1700 Designer Molecules BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications.
BMI-3000 Designer Molecules BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-3000 GEL Designer Molecules BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins
BMI-5000 Designer Molecules BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications.
BMI-5000 50% Toluene Designer Molecules BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications.
CAB-O-SIL® EH5 Cabot Corporation - Additives CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins
CAB-O-SIL® H5 Cabot Corporation - Additives CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins
CAB-O-SIL® LM150 Cabot Corporation - Additives CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins
CAB-O-SIL® M-5 Cabot Corporation - Additives CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins
CAB-O-SIL® TS530 Cabot Corporation - Additives CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins
CAB-O-SIL® TS610 Cabot Corporation - Additives CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins
CAB-O-SIL® TS622 Cabot Corporation - Additives CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins
CAB-O-SIL® TS720 Cabot Corporation - Additives CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins
CAB-O-SPERSE® 1030K Cabot Corporation - Additives CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins
CS-697 Designer Molecules CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins
CS-783 Designer Molecules CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications.
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
EC-1074 Designer Molecules EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins
EC-234 Designer Molecules EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins
EC-298 Designer Molecules EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins
EC-326 Designer Molecules EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins
EC-392 Designer Molecules EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications.
EC-861 Designer Molecules EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins
ECAT-243 Designer Molecules ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications.
ECAT-259 Designer Molecules ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins
ECAT-353 Designer Molecules ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins
ECAT-434 Designer Molecules ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins
Epotec® RD 103 Aditya Birla Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination,...voir plus Epotec® RD 103 is a low viscosity, aliphatic di-epoxide compound based on 1,4-butane diol. It is a reactive diluent for high viscosity epoxy resins. This product is well suited for use in structural adhesives and coatings for filament winding, lamination, electronic encapsulation, and other industrial applications. voir moins
Epotec® RD 104 Aditya Birla Epotec® RD 104 is a mono-functional, phenol-based glycidyl ether, primarily used for reducing the viscosity of conventional epoxy resins. This product is ideal for use in adhesives and casting, flooring, and construction applications.
Epotec® RD 105 Aditya Birla Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity....voir plus Epotec® RD 105 is a mono-functional, o-Cresol-based reactive diluent primarily used for reducing the viscosity of conventional epoxy resins. It features excellent retention of mechanical and chemical resistance properties, with no influence on reactivity. This product is ideal for use in adhesives and flooring, casting, & construction coatings. voir moins
Epotec® RD 106 Aditya Birla Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesive...voir plus Epotec® RD 106 is an aromatic, mono-functional, p-tertiary butyl phenol-based reactive diluent. It features a combination of good electrical properties, low viscosity, low volatility, and low odor level. This product is ideal for use in coatings, adhesives, laminates, and flooring applications. voir moins
Epotec® RD 107 Aditya Birla Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This prod...voir plus Epotec® RD 107 is a low viscosity, aliphatic di-epoxide compound based on 1,6-hexanediol, designed for use as a reactive diluent for high viscosity epoxy resins. It helps to improve toughness and retain chemical resistance in final formulations. This product is ideal for use in structural adhesives, coatings, and filament winding, lamination, & electronic encapsulation applications. voir moins
Epotec® RD 108 Aditya Birla Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal f...voir plus Epotec® RD 108 is a mono-glycidyl ether of C12-C14 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. It features improved non-yellowing characteristics, excellent wetting properties, and low odor. This product is ideal for use in self-leveling flooring & screed applications, metal and concrete primers & coatings, and general purpose adhesives. voir moins
Epotec® RD 109 Aditya Birla Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adh...voir plus Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adhesives. voir moins
Epotec® RD 110 Aditya Birla Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, c...voir plus Epotec® RD 110 is a mono-glycidyl ether of 2-ethyl hexanol, primarily used as a reactive diluent for high viscosity epoxy resins. It features very low viscosity and exceptional dilution efficiency. This product is ideal for use in flooring applications, coatings, and general purpose adhesives. voir moins
Epotec® RD 113 Aditya Birla Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is idea...voir plus Epotec® RD 113 is a low viscosity, trifunctional epoxy reactive diluent based on trimethylol propane. It features good cross-link density, which helps improve chemical resistance in formulations based on conventional BPA epoxy resins. This product is ideal for chemical resistant coatings, fast setting adhesives & sealants, tank linings, abrasion resistant castings, and encapsulation & other electronic applications. voir moins
Epotec® RD 114LE Aditya Birla Epotec® RD 114LE is a diglycidyl ether of neopentyl glycol, designed primarily as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in coatings and adhesives.
Epotec® RD 119LE Aditya Birla Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive c...voir plus Epotec® RD 119LE is a diglycidyl ether of polypropylene glycol which, when blended with conventional epoxy resins, improves flexibility, increases elongation, improves impact resistance, and reduces viscosity. This product is ideal for use in automotive coatings & adhesives, tank linings, coil coatings, and flooring applications. voir moins
Epotec® RD 121 Aditya Birla Epotec® RD 121 is a low color di-epoxide, based on dipropylene glycol, which improves flexibility and impact strength and increases elongation in cured systems. This product is ideal for use in adhesives and protective and marine coatings.
Epotec® TH 7202 Aditya Birla Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This ...voir plus Epotec® TH 7202 is a low viscosity, modified polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it features good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in fast setting adhesives and gel coats. voir moins
Epotec® TH 7207 Aditya Birla Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator fun...voir plus Epotec® TH 7207 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It features high reactivity even at low temperatures, rapid development of physical strength, and good compatibility & accelerator functionality with other polyamine curing agents. This product is ideal for use in chemical resistant coatings and rapid setting adhesives. voir moins
Epotec® TH 7210 Aditya Birla Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agent...voir plus Epotec® TH 7210 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. Highly reactive and fast setting, it yields good chemical resistance and can be used alone or as an accelerator for other curing agents. This product is ideal for use in solvent-free coatings and fast setting adhesives. voir moins
Epotec® TH 7211 Aditya Birla Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This prod...voir plus Epotec® TH 7211 is a low viscosity, modified aliphatic polyamine curing agent designed for use with liquid epoxy resins. It yields systems with long working times, excellent resistance to carbonation, and outstanding gloss, clarity, & toughness. This product is ideal for use in high solids & solvent-free coatings, adhesives, and floor toppings. voir moins
Epotec® TH 7212 Aditya Birla Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and hi...voir plus Epotec® TH 7212 is a very low viscosity, modified aliphatic amine curing agent featuring good impact resistance, high reactivity, and good penetration in smaller cracks. This product is ideal for use in crack injection systems, adhesives, castings, and high solids, low VOC, & solvent-free coatings. voir moins
Epotec® TH 7903 Aditya Birla Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...voir plus Epotec® TH 7903 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. voir moins
Epotec® TH 7905 Aditya Birla Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product...voir plus Epotec® TH 7905 is a low viscosity, modified, aliphatic polyamine-based mannich base curing agent designed for use with liquid epoxy resins. It is capable of curing in high humidity and low temperature conditions, as well as on damp surfaces. This product is ideal for use in chemical resistant coatings, adhesives, and concrete bonding compounds. voir moins
Epotec® TW 5001 Aditya Birla Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. T...voir plus Epotec® TW 5001 is an aqueous dispersion of liquid bisphenol-A epoxy resin with moderate viscosity. It is completely water reducible, contains no organic solvents, and includes an internal emulsifier for improved stability and reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, and adhesives. voir moins
Epotec® TW 5002 Aditya Birla Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improve...voir plus Epotec® TW 5002 is an aqueous dispersion of type-1 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in fiber sizing applications, protective coatings for steel & concrete, adhesives, and textile binders. voir moins
Epotec® TW 5003H Aditya Birla Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improv...voir plus Epotec® TW 5003H is an aqueous dispersion of type-7 solid bisphenol-A epoxy resin, using a proprietary emulsifier and supplied at 55% solids in water and organic co-solvents. It displays medium viscosity, is completely water reducible, and features improved stability & reduced water sensitivity. This product is ideal for use in protective coatings for steel & concrete, adhesives, fiber sizing applications, and textile binders. voir moins
Epotec® TW 5004 Aditya Birla Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders...voir plus Epotec® TW 5004 is an aqueous dispersion of standard Bisphenol F/A epoxy resin featuring moderate viscosity and 60% nonvolatile content. This product is well-suited for various applications in different temperature environments - including textile binders, coatings, and adhesives. voir moins
Epotec® YD 011X-75 Aditya Birla Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for us...voir plus Epotec® YD 011X-75 is a solution of unmodified, low molecular weight, bisphenol-A resin-based solid diglycidyl ether in xylene. When applied to coating formulations, it delivers improved flexibility and drying characteristics. This product is ideal for use in solvent-based anti-corrosive coatings, marine paints, industrial paints, adhesives, and laminates. voir moins
Epotec® YD 012 X 75 Aditya Birla Epotec® YD 012 X 75 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved in xylene. This product is mainly used in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications.
Epotec® YD 126 Aditya Birla Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is id...voir plus Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. voir moins
Epotec® YD 127 Aditya Birla Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is i...voir plus Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. voir moins
Epotec® YD 127LC Aditya Birla Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical,...voir plus Epotec® YD 127LC is a liquid epoxy resin produced from bisphenol-A and epichlorohydrin. It displays less crystallization tendency compared with standard liquid resins, and when cured with a hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, and construction applications. voir moins
Epotec® YD 128 Aditya Birla Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use i...voir plus Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automobile coatings, can & coil coatings, and marine & industrial protective coatings. voir moins
Epotec® YD 128 EL Aditya Birla Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for ...voir plus Epotec® YD 128 EL is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. voir moins
Epotec® YD 128 J Aditya Birla Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free co...voir plus Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free coatings, adhesives, and construction, electrical, & electronics applications. voir moins
Epotec® YD 128 R Aditya Birla Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...voir plus Epotec® YD 128 R is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings, adhesives, and construction, electrical, & electronics applications. voir moins
Epotec® YD 128 S Aditya Birla Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...voir plus Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings and adhesives. voir moins
Epotec® YD 129 Aditya Birla Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring appli...voir plus Epotec® YD 129 is an unmodified, high viscosity, liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. voir moins
Epotec® YD 134 Aditya Birla Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based co...voir plus Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based coatings, construction coatings & systems, and electrical & electronic applications. voir moins
Epotec® YD 134 A Aditya Birla Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protectiv...voir plus Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protective coatings. voir moins
Epotec® YD 134 S Aditya Birla Epotec® YD 134 S is a high molecular weight, bisphenol-A-based semi-solid epoxy resin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, and coal tar-based coatings.
Epotec® YD 134 X 80 Aditya Birla Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...voir plus Epotec® YD 134 X 80 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 80% solid in xylene for ease of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. voir moins
Epotec® YD 134 X 90 Aditya Birla Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-base...voir plus Epotec® YD 134 X 90 is an unmodified semi-solid diglycidyl ether of bisphenol-A, dissolved as 90% solid in xylene for easy of processing and handling. This product is ideal for use in high solids protective coatings, tank linings, adhesives, coal tar-based coatings, and flooring applications. voir moins
Epotec® YD 136 Aditya Birla Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesive...voir plus Epotec® YD 136 is an unmodified, high viscosity, bisphenol-A-based semi-solid diglycidyl ether which can be used to modify other resins to improve adhesion and flexibility. This product is ideal for use in marine & industrial protective coatings, adhesives, and solvent-based coatings. voir moins
Epotec® YD 515 Aditya Birla Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhe...voir plus Epotec® YD 515 is a bisphenol-A liquid epoxy resin, modified with reactive diluent, which displays reduced viscosity and surface tension. This product is ideal for use in self-leveling flooring applications, high solids and solvent-free coatings, and adhesives. voir moins
Epotec® YD 519 Aditya Birla Epotec® YD 519 is a general purpose, medium viscosity, reactive diluent-modified diglycidyl ether of bisphenol-A. This product is ideal for use in adhesives, coatings, and laminates.
Epotec® YD 522 Aditya Birla Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applicati...voir plus Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applications, high solids & solvent-free coatings, and adhesives. voir moins
Epotec® YD 529 Aditya Birla Epotec® YD 529 is a reactive diluent-modified diglycidyl ether of bisphenol-A, which imparts excellent mechanical properties with minimum effect on chemical resistance. This product is ideal for use in coatings, adhesives, laminates, and filament winding ...voir plus Epotec® YD 529 is a reactive diluent-modified diglycidyl ether of bisphenol-A, which imparts excellent mechanical properties with minimum effect on chemical resistance. This product is ideal for use in coatings, adhesives, laminates, and filament winding applications. voir moins
Epotec® YD 535 Aditya Birla Epotec® YD 535 is a low viscosity, modified, bisphenol-A-based epoxy resin which displays very good wet out and degassing, as well as excellent adhesion and mechanical, physical, and thermal properties. This product is ideal for use in coatings and adhesi...voir plus Epotec® YD 535 is a low viscosity, modified, bisphenol-A-based epoxy resin which displays very good wet out and degassing, as well as excellent adhesion and mechanical, physical, and thermal properties. This product is ideal for use in coatings and adhesives for fiber-reinforced structural components - such as those used in automotive, sporting equipment, navy, aeronautic, marine, and electrical insulation applications. voir moins
Epotec® YD 801 X 75 Aditya Birla Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corro...voir plus Epotec® YD 801 X 75 is an unmodified, standard, solid, medium molecular weight epoxy resin dissolved in xylene to facilitate handling. It is a general purpose resin used for coatings. This product is ideal for use in marine & industrial paints, anti-corrosive coatings, adhesives, and laminates. voir moins
Epotec® YD 901EK-80 Aditya Birla Epotec® YD 901EK-80 is an unmodified, standard, medium molecular weight and low softening point epoxy resin in MEK. This product is ideal for use in marine coatings, industrial anti-corrosive & maintenance coatings, and adhesives.
Epotec® YDF 170 Aditya Birla Epotec® YDF 170 is a general-purpose, unmodified, low viscosity diglycidyl ether of bisphenol-F which displays good chemical resistance. This product is ideal for use in adhesives for electronic applications, chemical resistance coatings, industrial floor...voir plus Epotec® YDF 170 is a general-purpose, unmodified, low viscosity diglycidyl ether of bisphenol-F which displays good chemical resistance. This product is ideal for use in adhesives for electronic applications, chemical resistance coatings, industrial flooring applications, and laminates. voir moins
Epotec® YDF 170LV Aditya Birla Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coati...voir plus Epotec® YDF 170LV is an unmodified, low viscosity diglycidyl ether of bisphenol-F. It can be used with standard bisphenol-A-based liquid epoxy resins and/or with epoxy reactive diluents. This product is ideal for use in adhesives, chemical resistant coatings, industrial flooring applications, and laminates. voir moins
Epotec® YDF 171 Aditya Birla Epotec® YDF 171 is a general-purpose, unmodified diglycidyl ether of bisphenol-F. This liquid epoxy resin offers good chemical resistance and flexibility. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, aut...voir plus Epotec® YDF 171 is a general-purpose, unmodified diglycidyl ether of bisphenol-F. This liquid epoxy resin offers good chemical resistance and flexibility. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, and marine & industrial protective coatings. voir moins
Epotec® YDF 172 Aditya Birla Epotec® YDF 172 is an unmodified, low viscosity diglycidyl ether of bisphenol-F which is specially formulated to avoid operational problems related to crystallization in geographical locations with low temperature winters. This product is ideal for use in...voir plus Epotec® YDF 172 is an unmodified, low viscosity diglycidyl ether of bisphenol-F which is specially formulated to avoid operational problems related to crystallization in geographical locations with low temperature winters. This product is ideal for use in chemical resistance coatings, industrial flooring applications, laminates, adhesives for electronic applications, solvent-free coatings, and filament winding applications. voir moins
Epotec® YDF 173 Aditya Birla Epotec® YDF 173 is a higher functional novolac resin featuring improved thermal stability, hardness, mechanical strength, and resistance to various chemicals. This product is ideal for use in adhesives for electronic applications, chemical resistant coati...voir plus Epotec® YDF 173 is a higher functional novolac resin featuring improved thermal stability, hardness, mechanical strength, and resistance to various chemicals. This product is ideal for use in adhesives for electronic applications, chemical resistant coatings, industrial flooring applications, and laminates. voir moins
Epotec® YDFM 250 Aditya Birla Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins...voir plus Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. voir moins
Epotec® YDFM 251 Aditya Birla Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is i...voir plus Epotec® YDFM 251 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance and reduced viscosity. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. voir moins
Epotec® YDFM 253 Aditya Birla Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface t...voir plus Epotec® YDFM 253 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with an added monofunctional reactive diluent. It features improved crystallization resistance, reduced viscosity, and lower surface tension. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self leveling flooring applications, and marine & industrial protective coatings. voir moins
Epotec® YDFM 261LV Aditya Birla Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhe...voir plus Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. voir moins
Epotec® YDFM 262 Aditya Birla Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...voir plus Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. voir moins
Epotec® YDFM 269 Aditya Birla Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...voir plus Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. voir moins
Epotec® YDFM 270 Aditya Birla Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & ...voir plus Epotec® YDFM 270 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, with a difunctional reactive diluent, featuring exceptional crystallization resistance. This product is ideal for use in high solids & solvent-free coatings, adhesives, solvent-free self-leveling flooring applications, and marine & industrial protective coatings. voir moins
Epotec® YDPN 631 Aditya Birla Epotec® YDPN 631 is a multifunctional, high viscosity epoxy phenol novolac resin delivering good chemical resistance and performance at elevated temperatures. This product is ideal for use in marine & protective coatings, adhesives, and coil coatings.
Epotec® YDPN 638 Aditya Birla Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings...voir plus Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, tank linings, chemical resistant coatings, adhesives, and coil coatings. voir moins
Epotec® YDPN 638LV Aditya Birla Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & p...voir plus Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, chemical resistant coatings, tank linings, adhesives, and coil coatings. voir moins
Epotec® YDPN 661 Aditya Birla Epotec® YDPN 661 is a multifunctional epoxy phenol novolac resin. This product is well suited for use in chemical resistant coatings & linings, chemical resistant floor topcoats, adhesives, coil coatings, and marine & protective coatings.
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
LX®-1035 Resin Neville Chemical Company LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.