| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect o...voir plus Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol. voir moins | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...voir plus Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. voir moins | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...voir plus Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. voir moins | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...voir plus Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. voir moins | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...voir plus Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. voir moins | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...voir plus Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. voir moins | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...voir plus Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...voir plus Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...voir plus Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...voir plus Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. voir moins | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...voir plus Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. voir moins | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...voir plus Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. voir moins | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...voir plus Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...voir plus Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. voir moins | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...voir plus Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...voir plus Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. voir moins | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...voir plus Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...voir plus Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). voir moins | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...voir plus Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. voir moins | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...voir plus Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. voir moins | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...voir plus Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. voir moins | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...voir plus Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| BYK®-012 | BYK | BYK®-012 is a mineral oil and silicone free defoamer for aqueous VOC-free adhesives and sealants. | |
| BYK®-016 | BYK | BYK®-016 is a mineral oil and silicone-free defoamer for aqueous adhesives and sealants. | |
| BYK®-022 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-023 | BYK | Silicone defoamer for aqueous adhesives and sealants. | |
| BYK®-024 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-025 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-028 | BYK | Silicone defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK®-035 | BYK | BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces. | |
| BYK®-037 | BYK | BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient. | |
| BYK®-038 | BYK | BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...voir plus BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. voir moins | |
| BYK®-077 | BYK | BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when reco...voir plus BYK®-077 is a solution of a polymethylalkylsiloxane. This product prevents foam and bubble formation arising during paint production and application in non-polar to high polar systems. It does not cause dewetting or defects in intercoat adhesion when recoated. voir moins | |
| BYK®-085 | BYK | Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exist...voir plus Silicone defoamer and surface additive for solvent-borne adhesives and sealants. BYK®-085 is the solvent-free version of BYK®-077 and is used especially in systems in which solvent-free additives are requested or where a special solvent requirement exists. voir moins | |
| BYK®-088 | BYK | Silicone air release additive recommended for PUR-based adhesives. Also suitable for epoxy systems. | |
| BYK®-093 | BYK | High Persistence Silicone Defoamer for Aqueous Adhesives and Sealants. This defoamer combines high efficiency with broad compatibilty. | |
| BYK®-1610 | BYK | BYK®-1610 is a defoamer for emulsion-based adhesives and sealants. | |
| BYK®-1615 | BYK | BYK®-1615 is a defoamer for adhesives and sealants based on aqueous emulsions. | |
| BYK-1641 | BYK | BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. | |
| BYK-1642 | BYK | BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage. | |
| BYK-1745 | BYK | BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. | |
| BYK®-1760 | BYK | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | |
| BYK®-3400 | BYK | BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-3410 | BYK | BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting. | |
| BYK®-345 | BYK | BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...voir plus BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. voir moins | |
| BYK®-346 | BYK | BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...voir plus BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. voir moins | |
| BYK®-347 | BYK | BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...voir plus BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. voir moins | |
| BYK®-348 | BYK | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...voir plus BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. voir moins | |
| BYK®-349 | BYK | BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...voir plus BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. voir moins | |
| BYK®-9076 | BYK | BYK®-9076 is a high molecular weight additive for solvent-free adhesives and sealants BYK®-9076 is especially useful for the stabilization of acidic and neutral types of carbon black. | |
| BYK®-9077 | BYK | BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mil...voir plus BYK®-9077 is a wetting and dispersing additive for solvent-free systems and pigment concentrates with high molecular weight. It is a copolymer with pigment affinic groups. This product reduces viscosity and leads to more Newtonian flow behavior in the mill-base. BYK-9077 is especially suited for stabilizing basic carbon black pigments. The product does not contain plasticizers. voir moins | |
| BYK®-A 530 | BYK | Air release agent and defoamer for solvent-based and solvent-free epoxy systems. | |
| BYK®-A 535 | BYK | Silicone-free defoamer / air release additive for solvent-free and solvent-borne epoxy and PUR-based adhesives and sealants. | |
| BYK®-A 550 | BYK | BYK®-A 550 shows a strong air release effect without creating a strong haziness effect. | |
| BYK®-A 555 | BYK | BYK®-A 555 shows the highest efficiency in various adhesive applications. | |
| BYK®-DYNWET 800 | BYK | BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting. | |
| BYK®-W 940 | BYK | BYK®-W 940 prevents sedimentation of mineral fillers such as calcium carbonate and aluminium trihydroxide and minimizes flooding and floating when organic and inorganic pigments are used. | |
| BYK®-W 961 | BYK | BYK®-W 961 is used as a wetting and dispersing additive for mineral fillers to prevent sedimentation. | |
| BYK®-W 966 | BYK | BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentati...voir plus BYK®-W 966 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide in polyester resins. It reduces the viscosity, so that a higher filler loading is possible, and helps to prevent sedimentation. voir moins | |
| BYK®-W 969 | BYK | BYK®-W 969 is used as a wetting and dispersing additive with viscosity reducing properties for adhesives and sealants. | |
| BYK®-W 980 | BYK | BYK®-W 980 improves the dispersion of a wide range of the most common fillers such as calcium carbonate and aluminium trihydroxide. It reduces the viscosity, so that a higher filler loading is possible and helps to prevent sedimentation. | |
| BYK®-W 985 | BYK | BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedim...voir plus BYK®-W 985 improves the wetting and dispersion speed of the most common fillers such as calcium carbonate and aluminium trihydroxide. It dramatically reduces the viscosity so that a higher filler load is possible. BYK®-W 985 usually will not prevent sedimentation. voir moins | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...voir plus CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. voir moins | |
| CLAYTONE® 40 | BYK | CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...voir plus CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. voir moins | |
| CLAYTONE® AF | BYK | CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a hig...voir plus CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. CLAYTONE® AF is self dispersing and does not require a polar activator. CLAYTONE® AF eliminates the need for high shear or pregels. voir moins | |
| CLAYTONE® APA | BYK | CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and ...voir plus CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. voir moins | |
| CLAYTONE® HT | BYK | CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a...voir plus CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings. voir moins | |
| CLAYTONE® HY | BYK | CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting ...voir plus CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity. voir moins | |
| CLAYTONE-3 | BYK | CLAYTONE-3 is an cconomy rheological additive suitable for use in diesel, clean mineral oil and synthetic olefin-based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | |
| CLAYTONE-EM | BYK | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-ER | BYK | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-IMG 400 | BYK | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
| CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...voir plus CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. voir moins | |
| CLAYTONE-SF | BYK | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
| CLAYTONE-VP V | BYK | CLAYTONE-VP V is a powdered rheology additive based on an organophilic phyllosilicate for non-polar to medium-polar systems to produce a thixotropic flow behavior. | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DISPERBYK®-118 | BYK | DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting an...voir plus DISPERBYK®-118 is a wetting and dispersing additive for solvent-borne systems to stabilize acidic, neutral and basic titanium dioxides, colored inorganic pigments, transparent iron oxides, fillers, and effect pigments. The additive improves the wetting and dispersing of all inorganic fillers such as calcium carbonate and aluminum hydroxide (ATH). DISPERBYK®-118 is all-purpose for titanium dioxides. The additive causes lower viscosity and enables higher filler loading. voir moins |
