| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| ACMO | Rahn USA Corp. | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...voir plus ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. voir moins | Request Sample |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DMAA | Rahn USA Corp. | DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxyg...voir plus DMAA is a reactive diluent for radically curable inks, coatings and adhesives. Its properties can be summarized as follows: low viscosity, very good optical clarity, water soluble and very good moisture vapor transition rate. It also offers very good oxygen penetration and water holding capacity. DMAA and its homopolymers are water soluble. voir moins | Request Sample |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| EPOXY METHACRYLATE 97-053 | Rahn USA Corp. | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...voir plus EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. voir moins | Request Sample |
| GENOCURE* BAPO | Rahn USA Corp. | GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due...voir plus GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems. voir moins | Request Sample |
| GENOCURE* BDK | Rahn USA Corp. | GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset in...voir plus GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* BDMM | Rahn USA Corp. | GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is...voir plus GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is typically used in concentrations from 0.5 to 4%. In printing inks it is often used in combination with thioxantones, aminobenzoates, benzophenones, GENOCURE* PMP, CPK and BDK. voir moins | Request Sample |
| GENOCURE* BMS | Rahn USA Corp. | GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...voir plus GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. voir moins | Request Sample |
| GENOCURE* BP | Rahn USA Corp. | GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent fo...voir plus GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent for photoinitiator cocktails. This product is typically applied in plastic varnishes, printing inks and varnishes and wood and industrial coatings. voir moins | Request Sample |
| GENOCURE* CPK | Rahn USA Corp. | GENOCURE* CPK is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* CPK is especially recommended when UV-coatings are required to exhibit only minimal yellowing even after prolonged exposure to sunlight. | Request Sample |
| GENOCURE* CQ | Rahn USA Corp. | GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental compos...voir plus GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental composites, visible light curing adhesives and pigmented systems. voir moins | Request Sample |
| GENOCURE* DEAP | Rahn USA Corp. | GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...voir plus GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. voir moins | Request Sample |
| GENOCURE* DETX | Rahn USA Corp. | GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress ink...voir plus GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. voir moins | Request Sample |
| GENOCURE* DMHA | Rahn USA Corp. | GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, pl...voir plus GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, plastic coatings, water dilutable coatings, clear coatings and pigmented coatings . voir moins | Request Sample |
| GENOCURE* EHA | Rahn USA Corp. | GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This pr...voir plus GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product can be applied in offset inks and varnishes letterpress inks, screen inks and varnishes, flexo inks and varnishes and industrial coatings and adhesives. voir moins | Request Sample |
| GENOCURE* EMK | Rahn USA Corp. | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...voir plus GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. voir moins | Request Sample |
| GENOCURE* EPD | Rahn USA Corp. | GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is ...voir plus GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is typically used in offset inks, letterpress inks, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* ITX | Rahn USA Corp. | GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks...voir plus GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. voir moins | Request Sample |
| GENOCURE* LBC | Rahn USA Corp. | GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...voir plus GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. voir moins | Request Sample |
| GENOCURE* LBP | Rahn USA Corp. | GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...voir plus GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. voir moins | Request Sample |
| GENOCURE* LTD | Rahn USA Corp. | GENOCURE* LTD is a 1:1 blend of TPO/DMHA and has main features of liquid, excellent reactivity, solubility, and very good surface/through cure. This product has applications in non yellowing clear coats, white pigmented systems, and adhesives. | Request Sample |
| GENOCURE* LTM | Rahn USA Corp. | GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yel...voir plus GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yellowing wood coatings, non yellowing coatings for plastics, non yellowing screen and decor varnishes, laminating adhesives and pressure sensitive adhesives. voir moins | Request Sample |
| GENOCURE* MBB | Rahn USA Corp. | GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...voir plus GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. voir moins | Request Sample |
| GENOCURE* MBF | Rahn USA Corp. | GENOCURE* MBF is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* MBF is especially recommended when UV coatings are required to exhibit minimal yellowing. | Request Sample |
| GENOCURE* MDEA | Rahn USA Corp. | GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress...voir plus GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress inks, screen inks and varnishes, paper and board varnishes and wood coatings. voir moins | Request Sample |
| GENOCURE* PBZ | Rahn USA Corp. | GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing...voir plus GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing inks, wood coatings, printed circuit board and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* PMP | Rahn USA Corp. | GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENO...voir plus GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENOCURE* EHA or GENOMER* 5275 (up to 15%). This product is applied in offset inks and varnishes, glass fiber coating, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives, wood coatings and printed circuit boards. voir moins | Request Sample |
| GENOCURE* TPO | Rahn USA Corp. | GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo in...voir plus GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes and letterpress inks. voir moins | Request Sample |
| GENOCURE* TPO-L | Rahn USA Corp. | GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, f...voir plus GENOCURE* TPO-L is a phosphine oxid, liquid photoinitiator for UVcurable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* TPO-L is highly effective for high film weights. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes, letterpress inks and fillers. voir moins | Request Sample |
| GENOMER* 1117LR | Rahn USA Corp. | GENOMER* 1117LR is non-yellowing and enhances toughness, flexibility, and adhesion to various substrates. The product does not contain TMPTA. | Request Sample |
| GENOMER* 1121M | Rahn USA Corp. | GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coa...voir plus GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coatings on glass; adhesives; and polymerization and copolymerization in emulsions and solutions. voir moins | Request Sample |
| GENOMER* 1122 | Rahn USA Corp. | GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; ...voir plus GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. voir moins | Request Sample |
| GENOMER* 1122TF | Rahn USA Corp. | GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings...voir plus GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. voir moins | Request Sample |
| GENOMER* 1125 | Rahn USA Corp. | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| GENOMER* 1226 | Rahn USA Corp. | GENOMER* 1126 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a di-functional acrylate that exhibits low viscosity, low odor and good cutting power. | Request Sample |
| GENOMER* 1231 | Rahn USA Corp. | GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product ...voir plus GENOMER* 1231 is a difunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. It offers excellent flexibility, excellent toughness, low yellowing, good heat resistance, and good chemical resistance. This product is recommended for coatings on metals and metallized substrates, coatings on glass, plastics, wood and paper, coatings on optical fiber, adhesives, electronics, and inks. voir moins | Request Sample |
| GENOMER* 1254M | Rahn USA Corp. | GENOMER* 1254M is a highly reactive difunctional methacrylate ester with low volatility and good heat resistance. Ethoxylated Bisphenol A Dimethacrylate monomer. Reactive diluent for free radical-curable inks, coatings, adhesives, and 3D printing applicat...voir plus GENOMER* 1254M is a highly reactive difunctional methacrylate ester with low volatility and good heat resistance. Ethoxylated Bisphenol A Dimethacrylate monomer. Reactive diluent for free radical-curable inks, coatings, adhesives, and 3D printing applications. voir moins | Request Sample |
| GENOMER* 2235 | Rahn USA Corp. | GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product...voir plus GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 2252 | Rahn USA Corp. | GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpr...voir plus GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings and adhesives. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 2252/GP25 | Rahn USA Corp. | GENOMER* 2252/GP25 is a Bisphenol A epoxy diacrylate in 25% GPTA. It is a resin for radically curable inks, coatings and adhesives. | Request Sample |
| GENOMER* 2252/TM20 | Rahn USA Corp. | GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP20 | Rahn USA Corp. | GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP30 | Rahn USA Corp. | GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2252/TP40 | Rahn USA Corp. | GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...voir plus GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. voir moins | Request Sample |
| GENOMER* 2253 | Rahn USA Corp. | GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and v...voir plus GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and varnishes for paper, board and plastics. voir moins | Request Sample |
| GENOMER* 2259 | Rahn USA Corp. | GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the...voir plus GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; coatings for paper, board and plastics; and wood coatings. voir moins | Request Sample |
| GENOMER* 2263 | Rahn USA Corp. | GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, scr...voir plus GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, screen inks and varnishes, and wood plastic, and paper coatings. voir moins | Request Sample |
| GENOMER* 2280 | Rahn USA Corp. | GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared t...voir plus GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared to standard bisphenol A epoxy acrylates, GENOMER* 2280 offers greater flexibility and toughness while maintaining fast cure response, high resistance properties and high hardness. voir moins | Request Sample |
| GENOMER* 2281 | Rahn USA Corp. | GENOMER* 2281 is a modified bisphenol A epoxy acrylate. With its main features compared to straight bisphenol-A epoxy acrylates, GENOMER* 2281 offers an excellent balance of properties like high reactivity, hardness, flexibility and toughness, and provide...voir plus GENOMER* 2281 is a modified bisphenol A epoxy acrylate. With its main features compared to straight bisphenol-A epoxy acrylates, GENOMER* 2281 offers an excellent balance of properties like high reactivity, hardness, flexibility and toughness, and provides good adhesion. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| GENOMER* 2312 | Rahn USA Corp. | GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of ...voir plus GENOMER* 2312 (epoxidized soy oil acrylate or ESOA) is an epoxy acrylate oligomer with utility in UV and EB free radical inks, coatings and adhesives. It offers moderate functionality and viscosity, excellent flexibility and good adhesion in a variety of applications, all with the benefit of low skin irritancy. This product is useful in dispersions where excellent pigment wetting contributes to inks with high gloss, color hold out and substrate adhesion. Likewise, in coatings for paper, metal and wood, GENOMER* 2312 contributes to excellent toughness, flexibility, crease and scuff resistance. voir moins | Request Sample |
| GENOMER* 3135 | Rahn USA Corp. | GENOMER* 3135 exhibiting excellent elongation and flexibility it can be used to improve flexibility in inks and coatings or used to increase modulus, strength and elongation in 3D printed products. GENOMER* 3135 has with 65% a high bio-renewable content. | Request Sample |
| GENOMER* 3143 | Rahn USA Corp. | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| GENOMER* 3364 | Rahn USA Corp. | GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coat...voir plus GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. voir moins | Request Sample |
| GENOMER* 3414 | Rahn USA Corp. | GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; ...voir plus GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. voir moins | Request Sample |
| GENOMER* 3430 | Rahn USA Corp. | GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...voir plus GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. voir moins | Request Sample |
| GENOMER* 3457 | Rahn USA Corp. | GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and var...voir plus GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and varnishes, industrial coatings and adhesives, and additive manufacturing applications. voir moins | Request Sample |
| GENOMER* 3486 | Rahn USA Corp. | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...voir plus GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. voir moins | Request Sample |
| GENOMER* 3497 | Rahn USA Corp. | GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coat...voir plus GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coatings, printing inks and varnishes for plastic foils and protective coatings for metals. voir moins | Request Sample |
| GENOMER* 3498 | Rahn USA Corp. | GENOMER* 3498 is a modified polyetherpolyol acrylate. Resin for radically curable inks, coatings, and adhesives. | Request Sample |
| GENOMER* 3611 | Rahn USA Corp. | GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigme...voir plus GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigment wetting, high reactivity, good scratch and solvent resistance, high abrasion resistance, and very good lithographic behavior. This product is used in flexo inks and varnishes, as well as in offset inks and varnishes. voir moins | Request Sample |
| GENOMER* 4188/EHA | Rahn USA Corp. | GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industr...voir plus GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. voir moins | Request Sample |
| GENOMER* 4188/M22 | Rahn USA Corp. | GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives a...voir plus GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. voir moins | Request Sample |
| GENOMER* 4205 | Rahn USA Corp. | GENOMER* 4205 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: dental composites, sterolithography and adhesives. | Request Sample |
| GENOMER* 4212 | Rahn USA Corp. | GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of f...voir plus GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations. voir moins | Request Sample |
| GENOMER* 4215 | Rahn USA Corp. | GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PV...voir plus GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PVC flooring; adhesives; and plastic varnishes. voir moins | Request Sample |
| GENOMER* 4215/M22 | Rahn USA Corp. | GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic fo...voir plus GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC, PE etc.); PVC flooring; industrial coatings and adhesives; and plastic varnishes. voir moins | Request Sample |
| GENOMER* 4217 | Rahn USA Corp. | GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulati...voir plus GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulations producing strong, but still flexible films. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastic and metal; wood coatings; flexo inks; and screen inks. voir moins | Request Sample |
| GENOMER* 4230 | Rahn USA Corp. | GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulat...voir plus GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. voir moins | Request Sample |
| GENOMER* 4247 | Rahn USA Corp. | GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low...voir plus GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low viscosity, and medium-high reactivity. This product provides films with exceptional hardness and good mechanical properties. It is recommended for clear and pigmented coatings. voir moins | Request Sample |
| GENOMER* 4256 | Rahn USA Corp. | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...voir plus GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. voir moins | Request Sample |
