| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins | |
| ECAT-353 | Designer Molecules | ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and...voir plus ECAT-353 is a besige powder imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-353 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| ECAT-434 | Designer Molecules | ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and ...voir plus ECAT-434 is a yellow solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-434 is most commonly used in catalyst and epoxy curative applications. voir moins | |
| KOMERATE A0010 | Green Chemical Co., Ltd. | KOMERATE A0010 is an aliphatic monofunctional acrylate monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A0010M | Green Chemical Co., Ltd. | KOMERATE A0010M is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and excellent solvency. | |
| KOMERATE A0016 | Green Chemical Co., Ltd. | KOMERATE A0016 is an aliphatic monofunctional monomer. It is characterized by low viscosity, low odor, and good compatibility. | |
| KOMERATE A0016M | Green Chemical Co., Ltd. | KOMERATE A0016M is a monofunctional monomer. It is characterized by good adhesion and high Tg. | |
| KOMERATE A0017 | Green Chemical Co., Ltd. | KOMERATE A0017 is an aliphatic, monofunctional tertiobutyl cyclohexanol acrylate. Fast reactivity, low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A0017M | Green Chemical Co., Ltd. | KOMERATE A0017M is an aliphatic, monofunctional tertiobutyl cyclohexanol methacrylate. Low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A002 | Green Chemical Co., Ltd. | KOMERATE A002 is a monofunctional monomer. It is characterized by good solvency and good adhesion on metal and plastics. | |
| KOMERATE A003 | Green Chemical Co., Ltd. | KOMERATE A003 is a monofunctional monomer. It has high refractive index and low volatility. | |
| KOMERATE A003M | Green Chemical Co., Ltd. | KOMERATE A003M is a monofunctional monomer. It is used to make polymers of high refractive index. | |
| KOMERATE A005 | Green Chemical Co., Ltd. | KOMERATE A005 is tetrahydrofurfuryl acrylate. It is a low viscosity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A005M | Green Chemical Co., Ltd. | KOMERATE A005M is a monofunctional monomer. It is characterized by excellent adhesion and good chemical resistance. | |
| KOMERATE A007 | Green Chemical Co., Ltd. | KOMERATE A007 is ethoxy ethoxy ethyl acrylate. It is a low viscosity monomer that offers good adhesion, flexibility, and low shrinkage properties. | |
| KOMERATE A008 | Green Chemical Co., Ltd. | KOMERATE A008 is a monofunctional monomer. It is characterized by high refractive index and good adhesion. | |
| KOMERATE A011 | Green Chemical Co., Ltd. | KOMERATE A011 is an ethoxylated o-phenylphenol acrylate monomer. It has high refractive index, low shrinkage, and good adhesion product. | |
| KOMERATE A014 | Green Chemical Co., Ltd. | KOMERATE A014 is phenol (EO) acrylate. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A014M | Green Chemical Co., Ltd. | KOMERATE A014M is a monofunctional methacrylate monomer. It is a low volatility mono-functional, aromatic monomer that offers good adhesion properties. | |
| KOMERATE A015 | Green Chemical Co., Ltd. | KOMERATE A015 is tetrahydrofurfuryl acrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015M | Green Chemical Co., Ltd. | KOMERATE A015M is mono-functional methacrylate. It is a low viscosity and low toxicity polar mono-functional monomer that offers good adhesion properties. | |
| KOMERATE A015P | Green Chemical Co., Ltd. | KOMERATE A015P is a monofunctional monomer. It is characterized by low skin irritation, and good adhesion. | |
| KOMERATE A021 | Green Chemical Co., Ltd. | KOMERATE A021 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A024 | Green Chemical Co., Ltd. | KOMERATE A024 is phenol (EO)2 acrylate. It is a low volatility mono-functional, aromatic monomer that is good viscosity reducer. | |
| KOMERATE A026 | Green Chemical Co., Ltd. | KOMERATE A026 is a monofunctional monomer. It is characterized by low odor, low shrinkage, and low skin irritation. | |
| KOMERATE A030 | Green Chemical Co., Ltd. | KOMERATE A030 is mono-functional monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A030M | Green Chemical Co., Ltd. | KOMERATE A030M is mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A031 | Green Chemical Co., Ltd. | KOMERATE A031 is a low volatility mono-functional monomer which can be polymerized in the presence of free radicals. Exhibits high refractive index. | |
| KOMERATE A040 | Green Chemical Co., Ltd. | KOMERATE A040 is a methoxy PEG400 acrylate monomer. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040M | Green Chemical Co., Ltd. | KOMERATE A040M is a monofunctional methaacrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A040TT | Green Chemical Co., Ltd. | KOMERATE A040TT is a methoxy PEG400 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A044 | Green Chemical Co., Ltd. | KOMERATE A044 is mono-functional acrylate monomer. Offers low volatility, low shrinkage and good adhesion. | |
| KOMERATE A046 | Green Chemical Co., Ltd. | KOMERATE A046 is a monofunctional monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A050 | Green Chemical Co., Ltd. | KOMERATE A050 is a methoxy PEG500 acrylate. It has good water solubility, flexibility, and low shrinkage. | |
| KOMERATE A050M | Green Chemical Co., Ltd. | KOMERATE A050M is a monofunctional monomer. It is characterized by good water solubility, low shrinkage, and excellent wetting. | |
| KOMERATE A060 | Green Chemical Co., Ltd. | KOMERATE A060 is a mono-functional acrylate monomer. It features water solubility, excellent wetting, and low Tg. | |
| KOMERATE A060M | Green Chemical Co., Ltd. | KOMERATE A060M is a mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A086 | Green Chemical Co., Ltd. | KOMERATE A086 is a monofunctional acrylate monomer. It is characterized by low skin irritation, good adhesion, and flexibility. | |
| KOMERATE A089 | Green Chemical Co., Ltd. | KOMERATE A089 is a monofunctional monomer. It is characterized by good adhesion, low shrinkage, and low viscosity. | |
| KOMERATE A099 | Green Chemical Co., Ltd. | KOMERATE A099 is a reactive diluent that polymerizes when exposed to sources of free radicals. | |
| KOMERATE A100 | Green Chemical Co., Ltd. | KOMERATE A100 is mono-functional monomer. It features water solubility, excellent wetting, and low Tg. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A100M | Green Chemical Co., Ltd. | KOMERATE A100M is methoxy polyethylene glycol monomethacrylate. It features water solubility, and excellent wetting. It is recommended as a versatile intermediate for coatings and polymer modification. | |
| KOMERATE A109 | Green Chemical Co., Ltd. | KOMERATE A109 is a monofunctional monomer with long chain. It is characterized by good adhesion, low shrinkage and flexibility. | |
| KOMERATE A109M | Green Chemical Co., Ltd. | KOMERATE A109M is a monofunctional monomer. It is characterized by good flexibility, and good adhesion. | |
| KOMERATE A129 | Green Chemical Co., Ltd. | KOMERATE A129 is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A1290 | Green Chemical Co., Ltd. | KOMERATE A1290 is lauryl acrylate forms homopolymers and copolymers. It has a low viscosity and low toxicity monomer. | |
| KOMERATE A1290M | Green Chemical Co., Ltd. | KOMERATE A1290M is a monofunctional monomer. It is characterized by long chain hydrophobic group. It offers adhesion, flexibility, and low skin irritation. | |
| KOMERATE A1291 | Green Chemical Co., Ltd. | KOMERATE A1291 is Lauryl Acrylate 1214 (LA 1214), which is a low viscosity, low toxicity monomer with a long pendant aliphatic chain and the high reactivity of acrylates. | |
| KOMERATE A1291M | Green Chemical Co., Ltd. | KOMERATE A1291M is Lauryl methacrylate 1214 (LMA 1214) is a low viscosity, low toxicity monomer with a long pendant aliphatic chain and the high reactivity of acrylates. It is characterized by good adhesion, low shrinkage and flexibility. | |
| KOMERATE A129M | Green Chemical Co., Ltd. | KOMERATE A129M is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A149 | Green Chemical Co., Ltd. | KOMERATE A149 is tetradecyl acrylate. Low viscosity and improved adhesion to plastics, metals, and other difficult substrates. | |
| KOMERATE A149M | Green Chemical Co., Ltd. | KOMERATE A149M is a monofunctional monomer. It is characterized by good adhesion and good flexibility. | |
| KOMERATE A169 | Green Chemical Co., Ltd. | KOMERATE A169 is a monofunctional monomer. It is characterized by good flexibility, low shrinkage, and good adhesion. | |
| KOMERATE A1691 | Green Chemical Co., Ltd. | KOMERATE A1691 iscetyl acrylate. It is a monomer with a long chain hydrophobic backbone. It is used for manufacturing polymers and for use as a feed stock for syntheses. | |
| KOMERATE A169M | Green Chemical Co., Ltd. | KOMERATE A169M is a monofunctional methacrylate monomer. It is characterized by good flexibility, low shrinkage, and good water resistance. | |
| KOMERATE A189 | Green Chemical Co., Ltd. | KOMERATE A189 is stearyl acrylate or octadecyl acrylate. It is a monomer with a long chain hydrophobic backbone. It may act as a bubble breaker. | |
| KOMERATE A1891 | Green Chemical Co., Ltd. | KOMERATE A1891 is monofunctional acrylate monomer. It is a monomer with a long chain hydrophobic backbone. | |
| KOMERATE A189M | Green Chemical Co., Ltd. | KOMERATE A189M is stearyl methacrylate or octadecyl metha. It is a monomer with a long chain hydrophobic backbone. | |
| KOMERATE A2013 | Green Chemical Co., Ltd. | KOMERATE A2013 is monofunctional acrylate monomer. It has a water soluble, flexible, and low shrinkage. | |
| KOMERATE A209 | Green Chemical Co., Ltd. | KOMERATE A209 is a monofunctional monomer. It is characterized by low shrinkage, and good adhesion. | |
| KOMERATE A2091 | Green Chemical Co., Ltd. | KOMERATE A2091 is a monofunctional monomer. It is characterized by good flexibility and a long hydrophobic chain. | |
| KOMERATE A229 | Green Chemical Co., Ltd. | KOMERATE A229 is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A2291 | Green Chemical Co., Ltd. | KOMERATE A2291 is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A2291M | Green Chemical Co., Ltd. | KOMERATE A2291M is a monofunctional methacrylate monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A229M | Green Chemical Co., Ltd. | KOMERATE A229M is a monofunctional monomer. It is characterized by low shrinkage, and excellent flexibility. | |
| KOMERATE A4013 | Green Chemical Co., Ltd. | KOMERATE A4013 is an Ethoxylated Allyl Acrylate that provides good water solubility and excellent wetting. | |
| KOMERATE C002 | Green Chemical Co., Ltd. | KOMERATE C002 is in the class of carboxylic monomers of the acrylic or methaclic acid type. More compatible with other monomers, thus reducing aqueous phase polymerization and producing more uniform copolymers. | |
| KOMERATE C021 | Green Chemical Co., Ltd. | KOMERATE C021 is caprolactone acrylate monomer. It offers low odor, low Tg and low skin irritation. | |
| KOMERATE D0013 | Green Chemical Co., Ltd. | KOMERATE D0013 is difunctional acrylate monomer. It possesses fast cure and low shrinkage. | |
| KOMERATE D002 | Green Chemical Co., Ltd. | KOMERATE D002 is di-functional acrylate monomer. It possesses low volatility, a hydrophobic backbone, good solvency, and fast curing. | |
| KOMERATE D002M | Green Chemical Co., Ltd. | KOMERATE D002M is a difunctional monomer. It is characterized by good solvency, hardness, and reforming. | |
| KOMERATE D003 | Green Chemical Co., Ltd. | KOMERATE D003 is a difunctional monomer. It is characterized by low viscosity, volatility, and hardness. |
