UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
LX®-1035 Resin Neville Chemical Company LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.
LX®-2161 Resin Neville Chemical Company LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins
LX®-238 Resin Neville Chemical Company LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins
NEVCHEM® 100 Neville Chemical Company NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins
NEVCHEM® 110 Neville Chemical Company NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins
NEVCHEM® 120 Neville Chemical Company NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 130 Neville Chemical Company NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins
NEVCHEM® 140 Neville Chemical Company NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 150 Neville Chemical Company NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins
NEVCHEM® 200 Neville Chemical Company NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins
NEVCHEM® 220 Neville Chemical Company NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins
NEVCHEM® 240 Neville Chemical Company NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins
NEVCHEM® 250 Neville Chemical Company NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins
NEVEX® 1069 Neville Chemical Company NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins
NEVPENE® 9545 Neville Chemical Company NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins
NEVTAC® 10 Neville Chemical Company NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers.
Nipol® 1001 Zeon Corporation Nipol® 1001 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for hot polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041 Zeon Corporation Nipol® 1041 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR.
Nipol® 1041L Zeon Corporation Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. ...voir plus Nipol® 1041L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product is a standard high acrylonitrile NBR for cold polymerization systems. Its specific gravity is 1.00 and it contains 40.5% bound acrylonitrile NBR. This product is a low Mooney version of N21 that provides good processability. voir moins
Nipol® 1072 Zeon Corporation Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% ...voir plus Nipol® 1072 is a high nitrile rubber (NBR) terpolymer that can be used in adhesives and industrial parts. This product is a carboxylated NBR that provides good abrasion resistance and tensile strength. Its specific gravity is 0.98 and it contains 27.0% bound acrylonitrile NBR. voir moins
Nipol® 1562 Zeon Corporation Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsi...voir plus Nipol® 1562 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 41% solids. Its average particle diameter is 50 nanometers, and its glass transition temperature is -21 degrees Celsius. voir moins
Nipol® 1571C2 Zeon Corporation Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius...voir plus Nipol® 1571C2 is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -10 degrees Celsius. voir moins
Nipol® 1571CL Zeon Corporation Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius...voir plus Nipol® 1571CL is a latex of an acrylonitrile butadiene rubber that can be used in adhesives. This product's pH is 8.0 and it contains 38% solids. Its average particle diameter is 100 nanometers and its glass transition temperature is -11 degrees Celsius. voir moins
Nipol® 1571H Zeon Corporation Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsiu...voir plus Nipol® 1571H is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -8 degrees Celsius. voir moins
Nipol® DN101 Zeon Corporation Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile ru...voir plus Nipol® DN101 is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. voir moins
Nipol® DN101L Zeon Corporation Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile r...voir plus Nipol® DN101L is a high nitrile rubber (NBR) that can be used in strong cements and adhesives. This product has good resistance to mold fouling and good metal corrosion resistance. Its specific gravity is 1.00 and it contains 42.5% bound acrylonitrile rubber. This product has a lower Mooney viscosity than DN101. voir moins
Nipol® LX110 Zeon Corporation Nipol® LX110 is a latex of a styrene-butadiene copolymer that can be used adhesives. This product's pH is 11.5 and it contains 40.5% solids. its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX112 Zeon Corporation Nipol® LX112 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 11.0 and it contains 40.5% solids. Its average particle diameter is 80 nanometers and its glass transition temperature is -47 degrees Celsius.
Nipol® LX426 Zeon Corporation Nipol® LX426 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -39 degrees Celsius.
Nipol® LX430 Zeon Corporation Nipol® LX430 is a latex of a styrene-butadiene copolymer that can be used in wood adhesives. This product's pH is 7.0 and it contains 49% solids. Its average particle diameter is 150 nanometers and its glass transition temperature is 12 degrees Celsius.
Nipol® LX432M Zeon Corporation Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperatu...voir plus Nipol® LX432M is a latex of a styrene-butadiene copolymer that can be used in adhesives and primers for masking tape. This product's pH is 8.0 and it contains 41% solids. Its average particle diameter is 130 nanometers and its glass transition temperature is -55 degrees Celsius. voir moins
Nipol® LX435 Zeon Corporation Nipol® LX435 is a latex of a styrene-butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 50% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius.
Nipol® LX473D Zeon Corporation Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees C...voir plus Nipol® LX473D is a latex of a styrene-butadiene copolymer that can be used in flooring adhesives. This product's average particle diameter is 80 nanometers and it contains 47.5% solids. Its pH is 8.5 and its glass transition temperature is -15 degrees Celsius. voir moins
Nipol® LX511A Zeon Corporation Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Cels...voir plus Nipol® LX511A is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 46% solids. Its average particle diameter is 170 nanometers and its glass transition temperature is -19 degrees Celsius. voir moins
Nipol® LX513 Zeon Corporation Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Cels...voir plus Nipol® LX513 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 10.0 and it contains 45% solids. Its average particle diameter is 140 nanometers and its glass transition temperature is -31 degrees Celsius. voir moins
Nipol® LX517B Zeon Corporation Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Cels...voir plus Nipol® LX517B is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 40% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -16 degrees Celsius. voir moins
Nipol® LX550 Zeon Corporation Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsi...voir plus Nipol® LX550 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. voir moins
Nipol® LX550L Zeon Corporation Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Cels...voir plus Nipol® LX550L is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.3 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -27 degrees Celsius. voir moins
Nipol® LX551 Zeon Corporation Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsi...voir plus Nipol® LX551 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.5 and it contains 45% solids. Its average particle diameter is 120 nanometers and its glass transition temperature is -14 degrees Celsius. voir moins
Nipol® LX552 Zeon Corporation Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsi...voir plus Nipol® LX552 is a latex of an acrylonitrile butadiene copolymer that can be used in adhesives. This product's pH is 8.0 and it contains 45% solids. Its average particle diameter is 110 nanometers and its glass transition temperature is -12 degrees Celsius. voir moins
Nipol® LX811H Zeon Corporation Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 de...voir plus Nipol® LX811H is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.5 and it contains 50% solids. Its viscosity is 170 mPas and its glass transition temperature is 1 degree Celsius. voir moins
Nipol® LX814 Zeon Corporation Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 deg...voir plus Nipol® LX814 is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives. This product's pH is 6.0 and it contains 46% solids. Its viscosity is 30 mPas and its glass transition temperature is 25 degrees Celsius. voir moins
Nipol® LX816A Zeon Corporation Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition...voir plus Nipol® LX816A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and pigment printing. This product's pH is 2.0 and it contains 42% solids. Its viscosity is 30 mPas and its glass transition temperature is -10 degrees Celsius. voir moins
Nipol® LX820A Zeon Corporation Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temper...voir plus Nipol® LX820A is a latex of copolymerized alkylester acrylic acid and alkylester metacrylic acid, which can be used in adhesives and paints. This product's pH is 7.5 and it contains 55% solids. Its viscosity is 3,000 mPas and its glass transition temperature is -43 degrees Celsius. voir moins
Quintone® 1325 Zeon Corporation Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...voir plus Quintone® 1325 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 460. voir moins
Quintone® 1345 Zeon Corporation Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point ...voir plus Quintone® 1345 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in oil and alkyd paints, printing inks, and as a tackifier for rubber adhesives. Its softening point is 140 degrees Celsius and its molecular weight is 500. voir moins
Quintone® 1500 Zeon Corporation Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 ...voir plus Quintone® 1500 is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 100 degrees Celsius and its molecular weight is 420. voir moins
Quintone® 1525L Zeon Corporation Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125...voir plus Quintone® 1525L is a petroleum resin made mainly from high-purity dicyclopentadiene that has been abstracted from C5 fractions. This product can be used in nitrocellulose lacquer alkyd epoxies, polyester paints, and adhesives. Its softening point is 125 degrees Celsius and its molecular weight is 470. voir moins
Quintone® A100 Zeon Corporation Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0....voir plus Quintone® A100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives for natural rubber. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® B170 Zeon Corporation Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium h...voir plus Quintone® B170 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in adhesives. Its softening point is 70 degrees Celsius, and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® D100 Zeon Corporation Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degree...voir plus Quintone® D100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 99 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® E200SN Zeon Corporation Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxi...voir plus Quintone® E200SN is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in rubber adhesives. Its softening point is 102 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. voir moins
Quintone® G100B Zeon Corporation Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains l...voir plus Quintone® G100B is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot-melt adhesives and rubber modifiers. Its softening point is 100 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® G115 Zeon Corporation Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of pot...voir plus Quintone® G115 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in EVA hot melt adhesives. Its softening point is 115 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® K100 Zeon Corporation Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassi...voir plus Quintone® K100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 101 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® M100 Zeon Corporation Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassiu...voir plus Quintone® M100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® N180 Zeon Corporation Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of pota...voir plus Quintone® N180 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS hot-melt adhesives. Its softening point is 80 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® N295 Zeon Corporation Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per...voir plus Quintone® N295 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 95 degrees Celsius and it contains 0.5 mg of potassium hydroxide per gram. voir moins
Quintone® P195N Zeon Corporation Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Ce...voir plus Quintone® P195N is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBS and EVA and can be used in light-colored hot melt adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® R100 Zeon Corporation Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassiu...voir plus Quintone® R100 is a petroleum resin made mainly from high-purity 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in SIS adhesives. Its softening point is 96 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® S100 Zeon Corporation Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hyd...voir plus Quintone® S100 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 94 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® U185 Zeon Corporation Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degree...voir plus Quintone® U185 is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product is compatible with SBR and EVA and can be used in adhesive tapes and hot melt adhesives. Its softening point is 86 degrees Celsius and contains less than 0.1 mg of potassium hydroxide per gram. voir moins
Quintone® U190 Zeon Corporation Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of po...voir plus Quintone® U190 is a petroleum resin derivative made mainly from 1,3-pentadiene that has been abstracted from C5 and C9 fractions. This product can be used in SIS adhesives. Its softening point is 89 degrees Celsius and it contains less than 0.1 mg of potassium hydroxide per gram. voir moins