| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). voir moins | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...voir plus Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. voir moins | |
| Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...voir plus Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. voir moins | |
| Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
| Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
| Andisil 1100 Silane | AB Specialty Silicones | Andisil 1100 Silane is an amino silane coupling agent. It is used to provide a bond between inorganic substrates and organic polymers. Andisil 1100 Silane is recommended for fiberglass reinforced composites. | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in R...voir plus Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. voir moins | |
| Andisil 1120 Silane | AB Specialty Silicones | Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane ...voir plus Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, and more. voir moins | |
| Andisil 1122 Silane | AB Specialty Silicones | Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, poly...voir plus Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. voir moins | |
| Andisil 1130 Silane | AB Specialty Silicones | Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers su...voir plus Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. voir moins | |
| Andisil 1170 Silane | AB Specialty Silicones | Andisil 1170 Silane is a bis(trimethoxysilylpropyl)amine amino silane. It is used as an adhesive and sealant. | |
| Andisil 1289 Silane | AB Specialty Silicones | Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent fo...voir plus Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent for rubbers. voir moins | |
| Andisil 151 Silane | AB Specialty Silicones | Andisil 151 Silane is a colorless, transparent liquid vinyl silane. It is a coupling agent in filled polymer systems. Andisil 151 Silane can also be used as a finish for glass or a binder additive in glass reinforced resins. | |
| Andisil 171 Silane | AB Specialty Silicones | Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhe...voir plus Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhesion between glass, mineral, and metal surfaces and provides elongation, flexibility, and spreading. voir moins | |
| Andisil 172 Silane | AB Specialty Silicones | Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion...voir plus Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion promoter in primers and coatings. voir moins | |
| Andisil 174 Silane | AB Specialty Silicones | Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinkin...voir plus Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinking agent, and blend additive. voir moins | |
| Andisil 187 Silane | AB Specialty Silicones | Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coating...voir plus Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coatings. voir moins | |
| Andisil 189 Silane | AB Specialty Silicones | Andisil 189 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 189 Silane improves adhesion to glass and metal surfaces. | |
| Andisil 1891 Silane | AB Specialty Silicones | Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as...voir plus Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as silica, clay, mica, and talc. voir moins | |
| Andisil 2100 Silane | AB Specialty Silicones | Andisil 2100 Silane is an aminopropylmethyldiethoxysilane coupling agent. This product is mainly used for foundry resins. | |
| Andisil 2120 Silane | AB Specialty Silicones | Andisil 2120 Silane is a diamino-functional silane that provides elongation, flexibility, and spreading at the interface as a coupling agent. It is used to improve adhesion between glass, mineral, and metal surface and aminoreactive resins. | |
| Andisil 6041 Silane | AB Specialty Silicones | Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be us...voir plus Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be used in waterborne systems and is suitable for many polymers. voir moins | |
| Andisil HMDZ | AB Specialty Silicones | Andisil HMDZ, chemical name hexamethyldisilazane, is a clear, colorless liquid. It can be used as a hydrophobing agent for inorganic fillers. Andisil HMDZ can be used as a protecting agent for OH and SH functionality. | |
| Andisil MOH 1,000 | AB Specialty Silicones | Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone ro...voir plus Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 10,000 | AB Specialty Silicones | Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone...voir plus Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 50,000 | AB Specialty Silicones | Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone...voir plus Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOS | AB Specialty Silicones | Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like met...voir plus Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil MT 9010 | AB Specialty Silicones | Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil OH 1,000 | AB Specialty Silicones | Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 14,000 | AB Specialty Silicones | Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 2,000 | AB Specialty Silicones | Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 20,000 | AB Specialty Silicones | Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 30 | AB Specialty Silicones | Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcaniz...voir plus Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 300,000 | AB Specialty Silicones | Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone roo...voir plus Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 3,500 | AB Specialty Silicones | Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 40 | AB Specialty Silicones | Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcan...voir plus Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 4,000 | AB Specialty Silicones | Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 50,000 | AB Specialty Silicones | Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 6,000 | AB Specialty Silicones | Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 70 | AB Specialty Silicones | Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulca...voir plus Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 750 | AB Specialty Silicones | Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperatur...voir plus Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 80,000 | AB Specialty Silicones | Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil POS | AB Specialty Silicones | Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like met...voir plus Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil TT 5050 | AB Specialty Silicones | Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive sub...voir plus Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VOS | AB Specialty Silicones | Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like meta...voir plus Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VT 6535 | AB Specialty Silicones | Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VT 8218 | AB Specialty Silicones | Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| B-Tough™ A1 | Cargill Industrial Specialties | B-Tough™ A1 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ A2 | Cargill Industrial Specialties | B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low ...voir plus B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). voir moins | |
| B-Tough™ A3 | Cargill Industrial Specialties | B-Tough™ A3 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ C2r | Cargill Industrial Specialties | B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface ma...voir plus B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface marring for optimal protection. Furthermore, B-Tough™ C2r offers improved flexibility whilst maintaining hardness and enhanced durability to extend product lifetime. voir moins | |
| BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...voir plus BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...voir plus BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...voir plus BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. voir moins | |
| BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...voir plus BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
| BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...voir plus BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...voir plus BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
| BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
| BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
| BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
| BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
| BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...voir plus BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins |
