Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). voir moins | |
Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...voir plus Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. voir moins | |
Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...voir plus Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. voir moins | |
Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) | Asahi Kasei Corp. Bemberg Div. | Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with th...voir plus Bemliese™ (Basic type: High-performance cellulose nonwoven fabric sheet) is a nonwoven that is unique in that it is composed of cellulose continuous-filament. Most nonwovens are composed of either natural short fibers or synthetic fibers. Compared with these conventional materials, due to composition, Bemliese™ has excellent features such as low particle and lint, high purity and biodegradability, good liquid absorbency, high heat resistance, etc. It's made from cotton linter, which is a by-product of cotton yield. It is suitable for use in filters, hygienic products, medical and agricultural materials, wipes for high-precision machinery and laboratories, etc. It holds international certification in BIODEGRADABLE, VEGAN, and OEKO-TEX. The Basic type: Fiber diameter is about 12~13μm. These values are just for reference and tested by methods of Asahi Kasei. voir moins | |
BENAQUA® 4000 | Elementis | BENAQUA® 4000 is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. | |
BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | |
BENTONE® 27 | Elementis | BENTONE® 27 is an organic solventborne derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | |
BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | |
BENTONE® 38 | Elementis | BENTONE® 38 is an organic solventborne derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | |
BENTONE® 57 | Elementis | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | |
BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...voir plus BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. voir moins | |
BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | |
BENTONE® DY CE | Elementis | BENTONE® DY CE is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | |
BENTONE® EW NA | Elementis | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | |
BENTONE® GS | Elementis | BENTONE® GS is a beneficiated, waterborne powdered smectite clay specifically developed for construction applications. | |
BENTONE® HD | Elementis | BENTONE® HD is a highly beneficiated hyperdispersible powdered waterborne hectorite clay. | |
BENTONE® LT | Elementis | BENTONE® LT is an organically modified powdered clay additive designed for water-borne systems, primarily latex paints. | |
BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | |
BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | |
BENTONE SD® 1 | Elementis | BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the pa...voir plus BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the paint manufacturing process and can be used for post-correction. It provides viscosity increase, reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillers. voir moins | |
BENTONE SD® 2 | Elementis | BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvent...voir plus BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. BENTONE SD® 2 is easy to incorporate and can be added dry to the pigment grinding process without requiring the use of a chemical activator or the preparation of a pregel. It may be used for post correction. voir moins | |
BENTONE SD® 3 | Elementis | BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not requi...voir plus BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not require pre-gelling or a chemical activator. Post correction with BENTONE SD® 3 is not recommended. It also has rheological additive provides stable viscosity, controls sag and suspends pigments. voir moins | |
BURGESS 2211 | Burgess Pigment Company | BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, a...voir plus BURGESS 2211 is a surface modified calcined aluminum silicate that has low warpage and high impact strength. This product is often used in urethane and polyester applications, and can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
BURGESS 30P® | Burgess Pigment Company | BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS 30P® is a flash calcined median particle size clay used extensively in PVC compounds for improving electricals. This product exhibits low specific gravity and excellent color, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
BURGESS 5178 | Burgess Pigment Company | BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extende...voir plus BURGESS 5178 is hydrophobic and a chemical bond between the calcined clay and the polymer exists. This product has been designed to provide excellent wet and dry electrical properties through a proprietary surface treatment. It is often used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
BURGESS CB | Burgess Pigment Company | BURGESS CB is a surface modified calcined aluminum silicate that has been designed for use in crosslinked polyethylene and polyester. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
BURGESS ICEBERG® | Burgess Pigment Company | BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opa...voir plus BURGESS ICEBERG® is a conventionally calcined median particle size, 91-93 GE brightness clay used as an extender of TiO2. It is used in trade sales interior/exterior flat paints and as a filler in polyurethane sealants. This product can provide better opacity, higher degree of whiteness, better tint strength, easy dispersion, and low moisture levels in moisture sensitive applications. voir moins | |
BURGESS ICECAP K® | Burgess Pigment Company | BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives...voir plus BURGESS ICECAP K® is an excellent extender for TiO2 in coatings where a high hegman grind is required. It has good electricals, low compression set, and low water absorption. This product can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
BURGESS KE | Burgess Pigment Company | BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender ...voir plus BURGESS KE is an uniquely processed silane modified anhydrous aluminum silicate designed for use in crosslinked polyethylene and polyester systems. This product is a very pure, high brightness, low residue, calcined kaolin that can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
BURGESS NO. 17 | Burgess Pigment Company | BURGESS NO. 17 is a fine particle size, high brightness hydrous kaolin clay used to extend TiO2 in semigloss paints and inks. This product is well ground, has excellent whiteness and dispersion, and high brightness. | |
BURGESS NO. 20 | Burgess Pigment Company | BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an...voir plus BURGESS NO. 20 is a fine particle size, medium brightness hydrous kaolin clay. This product is used in jacketing layer of wire and cable insulation compounds, rubber roll covers, polishing compounds and concrete curing compounds. It can also be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
BURGESS NO. 30® | Burgess Pigment Company | BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and ...voir plus BURGESS NO. 30® is a partially calcined clay used extensively in PVC compounds to improve insulation resistance. This product exhibits excellent dispersion and color uniformity, and can be used as an extender or filler in paints, coatings, adhesives, and sealants. voir moins | |
BURGESS NO. 40 | Burgess Pigment Company | BURGESS NO. 40 is a median particle size, medium brightness hydrous kaolin clay. This product is an acid pH clay exhibiting excellent dispersion properties, and can be used in trade sales coatings and adhesives. | |
BURGESS NO. 60 | Burgess Pigment Company | BURGESS NO. 60 is an acid pH, fine particle size, medium brightness hydrous kaolin clay with excellent dispersion properties. This product is used in inks, adhesives and industrial finishes, electrostatic deposition body primers, and EIFS. | |
BURGESS NO. 97 | Burgess Pigment Company | BURGESS NO. 97 is an ultra fine particle size, medium brightness hydrous kaolin clay that exhibits excellent tint strength. This product is a well-ground extender of TiO2 in semigloss, satin, and gloss paints. | |
BURGESS OPTIPOZZ® | Burgess Pigment Company | BURGESS OPTIPOZZ® is a high reactivity metakaolin produced by a patented process. This product increases chemical resistance and durability, and reduces shrinkage. It can be used as an extender or filler in paints, coatings, adhesives, and sealants. | |
BURGESS THERMOGLACE H | Burgess Pigment Company | BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability...voir plus BURGESS THERMOGLACE H is a delaminated, fine particle size, medium brightness hydrous kaolin clay. This product is used in primers and trade sales coatings for the reduction of mud-cracking (micro-cracking due to film stress) and reduction of permeability. voir moins | |
CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...voir plus DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. voir moins | |
DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA com...voir plus DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA compliant under CFR Title 21 175.105; 175.300; 176.170 and 176.180. voir moins | |
DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | |
DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | |
DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal waterborne applications. The product shows very good long-term efficiency. | |
DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 is a liquid defoamer, economical in use, for universal waterborne applications The product shows very good long-term efficiency. | |
DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. | |
DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | |
DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 is a silicone free defoamer for waterborne systems. This product is very easily emulsifiable in water. | |
DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing step...voir plus DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. voir moins | |
DAPRO® DF 975 | Elementis | DAPRO® DF 975 is a silicone-free waterborne defoamer based on a dispersion of olefinic solids. This product imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | |
DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | |
DAPRO® FK 321 | Elementis | DAPRO® FK 321 is an effective solventborne auxiliary for reducing the resistance of paints that are sprayed electrostatically. | |
DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | |
DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | |
DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...voir plus DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. voir moins | |
DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | |
DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...voir plus DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. voir moins | |
DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...voir plus DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. voir moins | |
DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | |
DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
DYHARD® RF2100 | AlzChem | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins |