| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...voir plus Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. voir moins | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...voir plus Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. voir moins | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...voir plus Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...voir plus Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. voir moins | |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...voir plus Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. voir moins | |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| Incozol 2 | Incorez Ltd. | Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and...voir plus Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content. voir moins | |
| Incozol 4 | Incorez Ltd. | Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it i...voir plus Incozol 4 is a bis-oxazolidine curing agent, which hydrolyses on exposure to moisture, yielding a reactive amine and hydroxyl functional cross-linking agent. Incozol 4 can be used in both one and two component PU systems. In one component systems it is normally used with aliphatic prepolymers. In two component systems it can also be used with aromatic prepolymers or isocyanates. voir moins | |
| Incozol BH | Incorez Ltd. | Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic p...voir plus Incozol BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker and benzaldehyde. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers. voir moins | |
| Incozol EH | Incorez Ltd. | Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through ...voir plus Incozol EH is a urethane bis-oxazolidine latent hardener for use in 1K polyurethane coatings, adhesives, sealants and elastomers. Used in conjunction with a low NCO polyurethane prepolymer, this hardener accelerates the cure of the prepolymer through a moisture triggered mechanism to afford crosslinking benefits to the 1K urethane. In addition, it enhances properties such as through cure development and mechanical strength through the elimination of CO2 gassing in high build, high solids PU systems. Incozol EH confers tolerance to the repeated opening of containers and can be used as a versatile curing agent with 2 or 4 functional mix ratios. It can also be handled and stored at temperatures as low as -15ºC without risk of crystallisation. voir moins | |
| Silzot® HQ plus (Powder) | AlzChem | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® SQ | AlzChem | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. |
