2-HEMA-Phosphate | Kowa American Corporation | 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Pho...voir plus 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Phosphate can be used in pigment systems to promote adhesion. voir moins | Request Sample |
99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...voir plus 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. voir moins | |
99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...voir plus Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. voir moins | |
ACTFLOW 1-A | Kowa American Corporation | ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal t...voir plus ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
ACTFLOW CB-3060 | Kowa American Corporation | ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excell...voir plus ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
ACTFLOW CB-3098 | Kowa American Corporation | ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...voir plus ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
ACTFLOW CBB-3098 | Kowa American Corporation | ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...voir plus ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
ACTFLOW NE-1000 | Kowa American Corporation | ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
ACTFLOW NE-3000 | Kowa American Corporation | ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
ACTFLOW UMM-1001 | Kowa American Corporation | ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...voir plus ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as a plasticizer replacements, modifying agents and additive agents. voir moins | Request Sample |
ACTFLOW UT-1001 | Kowa American Corporation | ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
ADH | Kowa American Corporation | ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
Chemisnow® MR-1HG | Kowa American Corporation | Chemisnow® MR-1HG is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
Chemisnow® MR-2G | Kowa American Corporation | Chemisnow® MR-2G is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
Chemisnow® MR-5C | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
Chemisnow® MR-7GC | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MX-180 | Kowa American Corporation | Chemisnow® MX-180 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MX-2000 | Kowa American Corporation | Chemisnow® MX-2000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MX-300 | Kowa American Corporation | Chemisnow® MX-300 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MX-3000 | Kowa American Corporation | Chemisnow® MX-3000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MX-500 | Kowa American Corporation | Chemisnow® MX-500 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MX-80H3wT | Kowa American Corporation | Chemisnow® MX-80H3wT is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
Chemisnow® MZ-10HN | Kowa American Corporation | Chemisnow® MZ-10HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
Chemisnow® MZ-12H | Kowa American Corporation | Chemisnow® MZ-12H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
Chemisnow® MZ-16H | Kowa American Corporation | Chemisnow® MZ-16H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
Chemisnow® MZ-20HN | Kowa American Corporation | Chemisnow® MZ-20HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
Chemisnow® MZ-30H | Kowa American Corporation | Chemisnow® MZ-30H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
Chemisnow® SGP-150C | Kowa American Corporation | Chemisnow® SGP-150C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
Chemisnow® SGP-70C | Kowa American Corporation | Chemisnow® SGP-70C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
Chemisnow® SX-130H | Kowa American Corporation | Chemisnow® SX-130H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
Chemisnow® SX-350H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
Chemisnow® SX-500H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
DURANOL™ G3450J | Kowa American Corporation | DURANOL™ G3450J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts good abrasion resistance, lower crystallinity, and lower viscosity. This product is recommended for UV-cure coatings and adhesive applications. | Request Sample |
DURANOL™ G3452 | Kowa American Corporation | DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyuret...voir plus DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. voir moins | Request Sample |
DURANOL™ G4672 | Kowa American Corporation | DURANOL™ G4672 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
DURANOL™ T4671 | Kowa American Corporation | DURANOL™ T4671 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
DURANOL™ T4691 | Kowa American Corporation | DURANOL™ T4691 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
DURANOL™ T4692 | Kowa American Corporation | DURANOL™ T4692 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
DURANOL™ T5650E | Kowa American Corporation | DURANOL™ T5650E is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and adhesives. | Request Sample |
DURANOL™ T5650J | Kowa American Corporation | DURANOL™ T5650J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and for adhesives agents. | Request Sample |
Duranol™ T5651 Soft Polycarbonatediol (PCD) | Kowa American Corporation | Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a...voir plus Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a softer feel as a binder in soft feel coatings. Duranol™ T5651 is easy to handle and exhibits good solvent solubility. It is amorphous and possesses stress at a low strain smaller than that of solid type PCD. Duranol™ T5651 is designed for various coating and other similar applications. voir moins | Request Sample |
DURANOL™ T5652 | Kowa American Corporation | DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyureth...voir plus DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. voir moins | Request Sample |
DURANOL™ T6001 | Kowa American Corporation | DURANOL™ T6001 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane elastomers and dispersions. | Request Sample |
DURANOL™ T6002 | Kowa American Corporation | DURANOL™ T6002 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane resins for artificial leather and polyurethane dispersions. | Request Sample |
DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....voir plus Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". voir moins | |
Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
IDH | Kowa American Corporation | IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...voir plus Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. voir moins | |
Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...voir plus Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. voir moins | |
Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...voir plus Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. voir moins | |
Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...voir plus Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. voir moins | |
Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...voir plus Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. voir moins | |
N-12 | Kowa American Corporation | N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agen...voir plus N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...voir plus Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. voir moins | |
PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...voir plus Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. voir moins | |
PVC Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , go...voir plus PVC Paste is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours. voir moins | |
RENEWABLE ORIGIN Sebacic Acid Polyester Polyol PPS-10100 | Kowa American Corporation | RENEWABLE ORIGIN PPS-10100 is a sebacic acid polyester polyol primarily used in polyurethanes for stability, heat, solvent & chemical resistance, low temp characteristics and application color stability in coatings, adhesives & sealants, & inks. | Request Sample |
SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...voir plus SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. voir moins | |
SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...voir plus SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. voir moins | |
SDH | Kowa American Corporation | SDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus SDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...voir plus Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. voir moins |