| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...voir plus 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF SE, Intermediates Division | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxi...voir plus 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. It can also be used as a solvent in polyester film seaming. voir moins | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins | |
| 1,9-Nonanediol Diacrylate (V-260) | Kowa American Corporation | 1,9-Nonanediol Diacrylate (V-260) is a clear to light yellow liquid. It freezes below 0°C and has a boiling point above 250°C. | Request Sample |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Dimethylaminoethyl Methacrylate (DMMA-D) | Kowa American Corporation | 2-Dimethylaminoethyl Methacrylate (DMMA-D) is a clear liquid. | Request Sample |
| 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) | Kowa American Corporation | 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) is a clear water white liquid. It has mehq and phenothiazine (PTZ) as inhibitors. | Request Sample |
| 2-Ethoxyethyl Methacrylate (ETMA) | Kowa American Corporation | 2-Ethoxyethyl Methacrylate (ETMA) is a clear water white liquid. It has the viscosity range of 2 - 6 cps at 25°C. | Request Sample |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-HEMA-Phosphate | Kowa American Corporation | 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Pho...voir plus 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Phosphate can be used in pigment systems to promote adhesion. voir moins | Request Sample |
| 2-Hydroxyethyl Acrylate (HEA) | Kowa American Corporation | 2-Hydroxyethyl Acrylate (HEA) is a clear water white liquid. It has a boiling point 82°C and a freezing point of below -70°C. | Request Sample |
| 2-Hydroxyethyl Methacrylate (HEMA) | Kowa American Corporation | 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provide...voir plus 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provides scratch, solvent & weather resistance, control of hydrophobicity &/or can introduce reactive sites. voir moins | Request Sample |
| 2-Hydroxyethyl Methacrylate (HISS) | Kowa American Corporation | 2-Hydroxyethyl Methacrylate (HISS) is 0.1% water and has 10 APHA of color when shipped. | Request Sample |
| 2-Hydroxypropyl Methacrylate (HPMA) | Kowa American Corporation | HPMA is a hydroxy functional monomer used to make acrylic polyols and other hydrophilic polymers. | Request Sample |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methoxyethyl Acrylate (MTA) | Kowa American Corporation | 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, ...voir plus 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, water resistance and adhesion. When used as an additive, it improves oil resistance dues to its polarity. voir moins | Request Sample |
| 2-Methoxyethyl Methacrylate (MTMA) | Kowa American Corporation | 2-Methoxyethyl Methacrylate (MTMA) is 0.1% water and has 20 APHA of color when shipped. | Request Sample |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins | |
| 4-Hydroxybutyl Acrylate (4HBA) | Kowa American Corporation | 4-HBA is a clear water white liquid. It is used for automotive painting. It helps protect against hardness and anit-rust, as well as offers good color, flatness, smoothness, brightness, and gloss. | Request Sample |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| Acrylamide Solid | Kowa American Corporation | Acrylamide Solid is a white crystal powder. | Request Sample |
| Acrylol Chloride | Kowa American Corporation | Acrylol Chloride is a clear liquid. | Request Sample |
| ACTFLOW 1-A | Kowa American Corporation | ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal t...voir plus ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW CB-3060 | Kowa American Corporation | ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excell...voir plus ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW CB-3098 | Kowa American Corporation | ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...voir plus ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW CBB-3098 | Kowa American Corporation | ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...voir plus ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW NE-1000 | Kowa American Corporation | ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW NE-3000 | Kowa American Corporation | ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW UMM-1001 | Kowa American Corporation | ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...voir plus ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as a plasticizer replacements, modifying agents and additive agents. voir moins | Request Sample |
| ACTFLOW UT-1001 | Kowa American Corporation | ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ADH | Kowa American Corporation | ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). voir moins | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...voir plus Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). voir moins | |
| Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...voir plus Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. voir moins | |
| Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...voir plus Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. voir moins | |
| Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
| Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...voir plus Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. voir moins | |
| Allyl Methacrylate (AMA) | Kowa American Corporation | Allyl Methacrylate (AMA) is a clear water liquid. this product is packed in 180Kg (397lb) steel drums or bulk ISO tanks. | Request Sample |
| Alpha Methyl Styrene Dimer (AMSD) | Kowa American Corporation | Alpha Methyl Styrene Dimer(AMSD) is a colorless liquid. | Request Sample |
| β-Mercapto Propionic Acid (BMPA) | Kowa American Corporation | β-Mercapto Propionic Acid (BMPA) is a clear liquid with no particulate matter. | Request Sample |
| Barifine® BF-1 | Kowa American Corporation | Barifine® BF-1 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsu...voir plus Barifine® BF-1 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| Barifine® BF-10 | Kowa American Corporation | Barifine® BF-10 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encaps...voir plus Barifine® BF-10 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| Barifine® BF-20 | Kowa American Corporation | Barifine® BF-20 (Barium sulfate) is a chemically stable substance with high heat, chemical & water resistance and increased weatherability. It is classified as a precipitated barium sulfate or a synthetic product and a ground barite obtained by pulverizi...voir plus Barifine® BF-20 (Barium sulfate) is a chemically stable substance with high heat, chemical & water resistance and increased weatherability. It is classified as a precipitated barium sulfate or a synthetic product and a ground barite obtained by pulverizing natural ores. It is used as a general extender pigment because of its relatively high specific gravity and low refractive index. voir moins | Request Sample |
| Barifine® BF-21 | Kowa American Corporation | Barifine® BF-21 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-21 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-25 | Kowa American Corporation | Barifine® BF-25 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-25 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-26 | Kowa American Corporation | Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-40 | Kowa American Corporation | Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encap...voir plus Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...voir plus Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. voir moins | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| BellPearl® C2000 | Kowa American Corporation | BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low ...voir plus BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® C800 | Kowa American Corporation | BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low v...voir plus BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® R100 | Kowa American Corporation | BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R200 | Kowa American Corporation | BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R800 | Kowa American Corporation | BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® S190 | Kowa American Corporation | BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S290 | Kowa American Corporation | BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S830 | Kowa American Corporation | BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S870 | Kowa American Corporation | BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S890 | Kowa American Corporation | BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S895 | Kowa American Corporation | BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| Benzyl Acrylate (BZA, V-160) | Kowa American Corporation | Benzyl Acrylate (BZA, V-160) is a clear water white liquid. It is .044% insoluble in water. | Request Sample |
| Benzyl Methacrylate (BZMA) | Kowa American Corporation | Benzyl Methacrylate (BZMA) is a clear water white liquid. When shipped, it is packed in 200Kg (441lb) chemical drums. | Request Sample |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...voir plus Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate voir moins | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...voir plus Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...voir plus Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. voir moins | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...voir plus Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates voir moins | |
| CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
| Chemisnow® MR-1HG | Kowa American Corporation | Chemisnow® MR-1HG is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-2G | Kowa American Corporation | Chemisnow® MR-2G is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-5C | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-7GC | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
