| CF2-3521 | NuSil Silicone Technology 1 | CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for mo...voir plus CF2-3521 is a translucent fluorosilicone elastomer that cures rapidly with heat from an oven or heating lamp, or at room temperature. It can be utilized in applications that would require a good solvent resistance. This product is especially useful for molding parts such as O-rings, stoppers, and seals. voir moins | |
| CF2-3521-2 | NuSil Silicone Technology 1 | CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also...voir plus CF2-3521-2 is a two part, black, 50 mole % fluorosilicone elastomer that cures at room temperature, or rapidly with heat from a heating lamp or oven. This product can be especially useful for molding parts such as stoppers, seals, and O-rings. It can also be used in applications that would require a solvent resistance. voir moins | |
| CV-2510 | NuSil Silicone Technology 1 | CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating tem...voir plus CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating temperature range. And it is functional in applications that require low outgassing under extreme operating conditions. voir moins | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...voir plus CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. voir moins | |
| CV2-2946 | NuSil Silicone Technology 1 | CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material...voir plus CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material is required. This product also has the ability to provide heat transfer between electrical/electronic component and their heat sinks. voir moins | |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| FS-3502-1 | NuSil Silicone Technology 1 | FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as wel...voir plus FS-3502-1 is a white, fluorosilicone gel that cures in contact with most materials, exceptions include: sulfur-cured organic rubbers, latex, chlorinated rubbers, some RTV silicones and unreacted residues. This gel can be used for filling small gaps as well as applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can be used for components exposed to JP-8, aviation fuels and solvents. voir moins | |
| LS-8941 | NuSil Silicone Technology 1 | LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid ...voir plus LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques. It is also ideal for molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed. voir moins |
