| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| GENIOSIL® GF 56 | Wacker Chemical Corporation | GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesiv...voir plus GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesives, emulsion paint, coatings and plastics crosslinking. voir moins | Request Sample |
| GENIOSIL® GF 62 | Wacker Chemical Corporation | GENIOSIL® GF 62 is mainly used in acetoxy- crosslinking silicone sealants, in which it functions as a crosslinker and/or adhesion promoter. In addition, GENIOSIL® GF 62 is used in the production of surface-modified fillers, as a water scavenger and as a p...voir plus GENIOSIL® GF 62 is mainly used in acetoxy- crosslinking silicone sealants, in which it functions as a crosslinker and/or adhesion promoter. In addition, GENIOSIL® GF 62 is used in the production of surface-modified fillers, as a water scavenger and as a primer component. voir moins | Request Sample |
| GENIOSIL® GF 82 | Wacker Chemical Corporation | GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion p...voir plus GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion paint and coatings. voir moins | Request Sample |
| GENIOSIL® GF 9 | Wacker Chemical Corporation | GENIOSIL® GF 9 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, p...voir plus GENIOSIL® GF 9 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, polyamides, polyacrylates, polyurethanes, ethylene/vinyl acetate copolymers and many other. voir moins | Request Sample |
| GENIOSIL® GF 91 | Wacker Chemical Corporation | GENIOSIL® GF 91 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, ...voir plus GENIOSIL® GF 91 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, polyamides, polyacrylates, polyurethanes, ethylene/vinyl acetate copolymers and many others. voir moins | Request Sample |
| GENIOSIL® GF 92 | Wacker Chemical Corporation | GENIOSIL® GF 92 is used mainly as an adhesion promoter in sealants, adhesives and coatings, as a surface modifier for fillers and for production of silane-modified polymers as binder in sealants and adhesives. It is highly miscible with standard organic s...voir plus GENIOSIL® GF 92 is used mainly as an adhesion promoter in sealants, adhesives and coatings, as a surface modifier for fillers and for production of silane-modified polymers as binder in sealants and adhesives. It is highly miscible with standard organic solvents, such as ethers and hydrocarbons. Mixing with ketones results in imine formation, while mixing with alcohols other than methanol leads to an autocatalytic exchange of alkoxy groups until the system reaches thermodynamic equilibrium. voir moins | Request Sample |
| GENIOSIL® GF 93 | Wacker Chemical Corporation | GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in th...voir plus GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in the presence of moisture (Ethanol is released) to form silanols, which can subsequently react with themselves to produce siloxanes or can bind to inorganic substrates. It is applied in adhesives, emulsion paint, coatings, filler treatment. voir moins | Request Sample |
| GENIOSIL® GF 95 | Wacker Chemical Corporation | GENIOSIL® GF 95 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor.Due to the nature of the amino group, this substance reacts as a base. | Request Sample |
| GENIOSIL® GF 98 | Wacker Chemical Corporation | GENIOSIL® GF 98 is an alkoxysilane with an amino-functional group. It is a clear, colorless to light yellowish liquid with a characteristically aromatic odor. The compound reacts with moisture under hydrolysis of the alkoxy groups and forms silanols, whic...voir plus GENIOSIL® GF 98 is an alkoxysilane with an amino-functional group. It is a clear, colorless to light yellowish liquid with a characteristically aromatic odor. The compound reacts with moisture under hydrolysis of the alkoxy groups and forms silanols, which reacts further forming siloxane. voir moins | Request Sample |
| GENIOSIL® STP-E10 | Wacker Chemical Corporation | GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E15 | Wacker Chemical Corporation | GENIOSIL® STP-E 15 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E30 | Wacker Chemical Corporation | GENIOSIL® STP-E 30 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E35 | Wacker Chemical Corporation | GENIOSIL® STP-E 35 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® XL 10 | Wacker Chemical Corporation | GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It ca...voir plus GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, all-purpose adhesives, assembly adhesives, coatings, construction adhesives, emulsion paint, industrial adhesives, parquet adhesives and plastics crosslinking. voir moins | Request Sample |
| GENIOSIL® XL 12 | Wacker Chemical Corporation | GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIO...voir plus GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIOSIL® XL 12 is an unsaturated organic compound and can be incorporated into organic polymers by radical grafting or co-polymerization. It can be applied in adhesives, emulsion paint, coatings and plastics crosslinking. voir moins | Request Sample |
| GENIOSIL® XL 33 | Wacker Chemical Corporation | GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...voir plus GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, emulsion paints and coatings. voir moins | Request Sample |
| GENIOSIL® XL 63 | Wacker Chemical Corporation | GENIOSIL® XL 63 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 63 is of substantial i...voir plus GENIOSIL® XL 63 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 63 is of substantial importance in systems that cure very rapidly at room temperature on exposure to (atmospheric) moisture. voir moins | Request Sample |
| GENIOSIL® XL 65 | Wacker Chemical Corporation | GENIOSIL® XL 65 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 65 is of substantial i...voir plus GENIOSIL® XL 65 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 65 is of substantial importance in systems that cure very rapidly at room temperature on exposure to (atmospheric) moisture. voir moins | Request Sample |
| GENIOSIL® XL 926 | Wacker Chemical Corporation | GENIOSIL® XL 926 binds via its aminomethyl group to electrophilic groups in resins and polymers. Aside from groups such as epoxides and esters, it is particularly the isocyanate groups present in polyurethanes that are important here.GENIOSIL® XL 926 is c...voir plus GENIOSIL® XL 926 binds via its aminomethyl group to electrophilic groups in resins and polymers. Aside from groups such as epoxides and esters, it is particularly the isocyanate groups present in polyurethanes that are important here.GENIOSIL® XL 926 is characterized by its high reactivity toward moisture, a direct consequence of the nitrogen atom's proximity to the silicon atom within the molecule (alpha-effect). voir moins | Request Sample |
| HDK® H13L | Wacker Chemical Corporation | Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. | Request Sample |
| HDK® H15 | Wacker Chemical Corporation | HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers...voir plus HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 acts as a free flow additive in the production of technical powders. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a residual silanol content of 50%, and a pH value of 3,8-4,8. voir moins | Request Sample |
| HDK® H17 | Wacker Chemical Corporation | Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. | Request Sample |
| HDK® H18 | Wacker Chemical Corporation | HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. Th...voir plus HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a carbon content of approx. 4,5%, and a pH value of 4,0-6,8. voir moins | Request Sample |
| HDK® N20 | Wacker Chemical Corporation | HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in el...voir plus HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 acts as a free flow additive in the production of technical powders. voir moins | Request Sample |
| HDK® N20D | Wacker Chemical Corporation | HDK® N20D is a synthetic, hydrophilic amorphous silica that is produced via flame hydrolysis. It is ideally used in adhesives, anitperspirants, coil coatings, decorative cosmetics, hair care, powder coatings, shaving, sun scree, skin care, tooth pastes, a...voir plus HDK® N20D is a synthetic, hydrophilic amorphous silica that is produced via flame hydrolysis. It is ideally used in adhesives, anitperspirants, coil coatings, decorative cosmetics, hair care, powder coatings, shaving, sun scree, skin care, tooth pastes, and various other applications. This product has a BET surface of 170-230 m2/g, a loss of weight of < 2%, and a sieve residue of < 0.03%. voir moins | Request Sample |
| HDK® V15A | Wacker Chemical Corporation | Synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| SEMICOSIL® 989/1K | Wacker Chemical Corporation | SEMICOSIL® 989/1K is a non-slump, thermally curable, addition curing one-part silicone rubber. It shows good primerless adhesion to many substrates. | Request Sample |
| SILZOT® FS-X1 | AlzChem | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...voir plus SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. voir moins | |
| Silzot® HQ plus (Powder) | AlzChem | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| Silzot® SQ | AlzChem | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| VINNAPAS® 224 HD | Wacker Chemical Corporation | VINNAPAS® 224 HD is a fine-particle dispersion of a special styrene/acrylate copolymer. It has excellent pigment-binding capacity and very good adhesion to inorganic substrates. VINNAPAS® 224 HD is ideal for manufacturing construction and tile adhesive pa...voir plus VINNAPAS® 224 HD is a fine-particle dispersion of a special styrene/acrylate copolymer. It has excellent pigment-binding capacity and very good adhesion to inorganic substrates. VINNAPAS® 224 HD is ideal for manufacturing construction and tile adhesive paste with extremely good wet adhesion properties. It's used as a binder for roofing compounds, high-quality synthetic-resin and silicone-resin plasters, and as a primer for flooring compounds. Typically it's applied in plasters, silicone resins, tile adhesives and primers. voir moins | Request Sample |
| VINNAPAS® 400 | Wacker Chemical Corporation | VINNAPAS® 400 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene(VAE) copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a high-performance dispersion offering a superior balance of adhesive/cohesive propert...voir plus VINNAPAS® 400 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene(VAE) copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a high-performance dispersion offering a superior balance of adhesive/cohesive properties useful in an extremely wide variety of applications. voir moins | Request Sample |
| VINNAPAS® 400 H | Wacker Chemical Corporation | VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/c...voir plus VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/cohesive properties useful in achieving much higher formulation viscosities. voir moins | Request Sample |
| VINNAPAS® 401 | Wacker Chemical Corporation | VINNAPAS® 401 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of -15 °C. It was developed to offer easy clean-up, long open time and excellent film flexibility. | Request Sample |
| VINNAPAS® 4019 E | Wacker Chemical Corporation | VINNAPAS® 4019 E is a copolymer powder of vinyl acetate and ethylene. It is dispersible in water and is suitable for formulating compounds of high ultimate strength. | Request Sample |
| VINNAPAS® 4042 H | Wacker Chemical Corporation | VINNAPAS® 4042 H is a very flexible dispersible polymer powder based on vinyl acetate and ethylene with slight hydrophobic effect for very good tensile adhesion strength particularly on organic surfaces. | Request Sample |
| VINNAPAS® 5010 N | Wacker Chemical Corporation | VINNAPAS® 5010 N is a copolymer powder of vinyl acetate and ethylene. It is dispersible in water and has good saponification resistance. | Request Sample |
| VINNAPAS® 5012 T | Wacker Chemical Corporation | VINNAPAS® 5012 T is a copolymer powder of vinyl acetate and ethylene. It is dispersible in water and has good saponification resistance. | Request Sample |
| VINNAPAS® 5014 F | Wacker Chemical Corporation | VINNAPAS® 5014 F is a copolymer powder of vinyl acetate and ethylene. It is dispersible in water and is also a highly effective plasticizing admixture. | Request Sample |
| VINNAPAS® 5021 T | Wacker Chemical Corporation | VINNAPAS® 5021 T is a thixotropic product with good adhesion and water resistance. | Request Sample |
| VINNAPAS® 5025 L | Wacker Chemical Corporation | VINNAPAS® 5025 L is a leveling dispersible powder based on vinyl acetate and ethylene with good defoaming properties for smooth surfaces and very good tolerance against water over-dosage. | Request Sample |
