| BR 100 P | Arkema Rheology & Specialty Additives | BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints,...voir plus BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints, anticorrosion paints and adhesives. voir moins | Request Sample |
| Coadis™ 173 | Arkema Rheology & Specialty Additives | Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations s...voir plus Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations showing high rates of mineral pigments and requiring a limited water absorption. Also suitable for oxide pigments and more specifically zinc oxides. voir moins | Request Sample |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...voir plus Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. voir moins | Request Sample |
| Coadis™ BR 3 | Arkema Rheology & Specialty Additives | Coadis™ BR 3 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coapur™ 2020 W | Arkema Rheology & Specialty Additives | Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheo...voir plus Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2020 W is a pure associative thickener. It is designed to interact strongly with the blinder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2020 W helps to match the highest coating quality possible for water-based formulations. voir moins | Request Sample |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
| Coapur™ 2501 | Arkema Rheology & Specialty Additives | Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film bu...voir plus Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and levelling together flexibility of use. voir moins | Request Sample |
| Coapur™ 3020 | Arkema Rheology & Specialty Additives | Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures ex...voir plus Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. voir moins | Request Sample |
| Coapur™ 3020 BB | Arkema Rheology & Specialty Additives | Coapur™ 3020 BB is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures...voir plus Coapur™ 3020 BB is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. voir moins | Request Sample |
| Coapur™ 3025 | Arkema Rheology & Specialty Additives | Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures exc...voir plus Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. voir moins | Request Sample |
| Coapur™ 520 W | Arkema Rheology & Specialty Additives | Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve s...voir plus Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve significantly spattering resistance while offering also some antisettling properties. Furthermore, it provides very good response and efficiency in VAE binders. This new polyurethane thickener could therefore easily replace the use of a combination of high-shear and low-shear thickeners. voir moins | Request Sample |
| Coapur™ 6050 | Arkema Rheology & Specialty Additives | Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear ra...voir plus Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear rates. voir moins | Request Sample |
| Coapur™ 817 W | Arkema Rheology & Specialty Additives | Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...voir plus Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. voir moins | Request Sample |
| Coapur™ 830 W | Arkema Rheology & Specialty Additives | Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...voir plus Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. It is a 30% solids version of Coapur™ 817 W. voir moins | Request Sample |
| Coapur™ 980 W | Arkema Rheology & Specialty Additives | Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...voir plus Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. voir moins | Request Sample |
| Coapur™ XS 12 | Arkema Rheology & Specialty Additives | Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheo...voir plus Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. voir moins | Request Sample |
| Coapur™ XS 22 | Arkema Rheology & Specialty Additives | Coapur™ XS 22 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It has been especially designed to offer a good reactivity with alkyd emulsion systems. | Request Sample |
| Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits vi...voir plus Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage and enables to match excellent results based on rub-out test. voir moins | Request Sample |
| Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...voir plus Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. voir moins | Request Sample |
| CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...voir plus CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. voir moins | Request Sample |
| CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
| CRAYVALLAC® LA-377 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitab...voir plus CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided. voir moins | Request Sample |
| CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...voir plus CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. voir moins | Request Sample |
| CRAYVALLAC® OPTIMA | Arkema Rheology & Specialty Additives | CRAYVALLAC® OPTIMA is a high-performance, micronized amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good leveling). CRAYVALLAC® OPTIMA overcomes thos...voir plus CRAYVALLAC® OPTIMA is a high-performance, micronized amide wax rheology modifier suitable for high-solids and solvent-free applications recommended for its ease of activation and smooth viscosity recovery (good leveling). CRAYVALLAC® OPTIMA overcomes those difficulties that exist with hydrogenated castor oil-based rheology modifiers e.g. seeding and false-body without the need to increase the temperature of activation. Its smooth viscosity recovery will help to achieve high film thickness without compromising good leveling. voir moins | Request Sample |
| CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...voir plus CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. voir moins | Request Sample |
| CRAYVALLAC® PF | Arkema Rheology & Specialty Additives | CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF f...voir plus CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF fine particles to an interacting network of fibers. It is this network that gives rise to the final system’s shear thinning rheology. This shear-thinning behavior provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. CRAYVALLAC® PF is suitable for a multitude of applications. voir moins | Request Sample |
| CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocar...voir plus CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil-based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance-enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fiber-like particles. It is this network that gives rise to the final coating’s shear-thinning rheology. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. voir moins | Request Sample |
| CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high-performance micronized amide wax rheology modifier designed for the high-temperature manufacture of moisture curing methoxy silane systems, where processing temperatures typically lie within the range of 90 – 115°C. CRAYVALLAC® SL...voir plus CRAYVALLAC® SL is a high-performance micronized amide wax rheology modifier designed for the high-temperature manufacture of moisture curing methoxy silane systems, where processing temperatures typically lie within the range of 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibers. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. voir moins | Request Sample |
| CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...voir plus CRAYVALLAC® SLT is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. voir moins | Request Sample |
| CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...voir plus CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. voir moins | Request Sample |
| CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...voir plus CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. voir moins | Request Sample |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...voir plus CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. voir moins | Request Sample |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100M | AlzChem | DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100M is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® A5M30 | AlzChem | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...voir plus DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. voir moins | |
| DYHARD® D50EP | AlzChem | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...voir plus DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. voir moins | |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® OTB | AlzChem | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| Ecodis™ 40 | Arkema Rheology & Specialty Additives | Ecodis™ 40 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). ...voir plus Ecodis™ 40 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dixide, Kaolin and calcium cabonates. Besides dispersion paints, the main applications are in adhesives & sealants. voir moins | Request Sample |
| Ecodis™ 80 | Arkema Rheology & Specialty Additives | Ecodis™ 80 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration...voir plus Ecodis™ 80 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dixide, Kaolin and calcium cabonates. Besides dispersion paints, the main applications for Ecodis™ 80 are in adhesives and wall paper pastes. voir moins | Request Sample |
| Ecodis™ C 30 | Arkema Rheology & Specialty Additives | Ecodis™ C 30 has been especially developed as a lighter-colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to ...voir plus Ecodis™ C 30 has been especially developed as a lighter-colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC. voir moins | Request Sample |
| Ecodis™ N | Arkema Rheology & Specialty Additives | Ecodis™ N is a cost effective dispersant recommended for use in matt dispersion paints. It contributes to shorten the time needed for a proper incorporation of usual fillers and pigments (calcium carbonate, titanium dioxide) even when a high concentration...voir plus Ecodis™ N is a cost effective dispersant recommended for use in matt dispersion paints. It contributes to shorten the time needed for a proper incorporation of usual fillers and pigments (calcium carbonate, titanium dioxide) even when a high concentration in solids is required. Ecodis™ N also helps to ensure long term viscosity stability to dispersion paints showing a high solids content and/or a high PVC (pigment volumic concentration). voir moins | Request Sample |
| Ecodis™ NP | Arkema Rheology & Specialty Additives | Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders, and inorganic pigments. It enables to achievement of mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or defloccula...voir plus Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders, and inorganic pigments. It enables to achievement of mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating tools. Ecodis™ NP is particularly adapted for the dispersion of fine calcium carbonates, clays, and high value pigments such as titanium dioxide across a wide range of water-based formulations. It ensures very good storage stability even for formulations stored for a long time at higher temperatures, which is not the case of inorganic additives such as phosphate-based dispersants. Ecodis™ NP contributes to reducing formulation costs thanks to its high effectiveness and to the reduction of grinding time. voir moins | Request Sample |
| Ecodis™ P 30 | Arkema Rheology & Specialty Additives | Ecodis™ P 30 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration)...voir plus Ecodis™ P 30 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). Very versatile and suitable for titanium dixide, Kaolin and calcium cabonates. voir moins | Request Sample |
| Ecodis™ P 30 MB | Arkema Rheology & Specialty Additives | Ecodis™ P 30 MB is the Mass Balance version of the Ecodis™ P 30 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 30 MB achieves the same performance as the...voir plus Ecodis™ P 30 MB is the Mass Balance version of the Ecodis™ P 30 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 30 MB achieves the same performance as the Ecodis™ P 30 and can be readily used and implemented as a direct drop-in. voir moins | Request Sample |
| Ecodis™ P 50 | Arkema Rheology & Specialty Additives | Ecodis™ P 50 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration)...voir plus Ecodis™ P 50 is a sodium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). voir moins | Request Sample |
| Ecodis™ P 50 MB | Arkema Rheology & Specialty Additives | Ecodis™ P 50 MB is the Mass Balance version of the Ecodis™ P 50 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 50 MB achieves the same performance as the...voir plus Ecodis™ P 50 MB is the Mass Balance version of the Ecodis™ P 50 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 50 MB achieves the same performance as the Ecodis™ P 50 and can be readily used and implemented as a direct drop-in. voir moins | Request Sample |
| Ecodis™ P 90 | Arkema Rheology & Specialty Additives | Ecodis™ P 90 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentrati...voir plus Ecodis™ P 90 is an ammonium neutralized polyacrylate dispersing agent for water-based systems. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC (Pigment Volume Concentration). It also provides improved scrub resistance. voir moins | Request Sample |
| Ecodis™ P 90 MB | Arkema Rheology & Specialty Additives | Ecodis™ P 90 MB is the Mass Balance version of the Ecodis™ P 90 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 90 MB achieves the same performance as the...voir plus Ecodis™ P 90 MB is the Mass Balance version of the Ecodis™ P 90 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 90 MB achieves the same performance as the Ecodis™ P 90 and can be readily used and implemented as a direct drop-in. voir moins | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| Rheotech™ 146 | Arkema Rheology & Specialty Additives | Rheotech™ 146 is a non associative thickener designed for use in adhesives, paints, sealants & mastics. | Request Sample |
