| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...voir plus 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF SE, Intermediates Division | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxi...voir plus 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. It can also be used as a solvent in polyester film seaming. voir moins | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| ACRESIN® A 204 UV | BASF Dispersions & Resins | acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, w...voir plus acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, which require coat weights up to 80 g/m2 (3 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 250 UV | BASF Dispersions & Resins | acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 260 UV | BASF Dispersions & Resins | acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® UV 3532 | BASF Dispersions & Resins | acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weight...voir plus acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights up to ~40 g/m2 (1.5 mils). By virtue of its low glass transition temperature, it may also be used as a freezer grade adhesive in various applications. voir moins | |
| ACRONAL® 3630 | BASF Dispersions & Resins | Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, t...voir plus Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. voir moins | |
| ACRONAL® 3633 | BASF Dispersions & Resins | Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non...voir plus Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. voir moins | |
| ACRONAL® 3636 X | BASF Dispersions & Resins | Acronal® 3636 X is an APEO-free, aqueous adhesive dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® 4 D | BASF Dispersions & Resins | Acronal® 4 D is a dispersion of a polyacrylic acid butyl ester in water used to manufacture pressure-sensitive adhesives for self-adhesives articles. | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® 4034 | BASF Dispersions & Resins | Acronal® 4034 is a non-APEO containing acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesives labels and tapes. | |
| ACRONAL® 4053 X | BASF Dispersions & Resins | Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending. | |
| ACRONAL® 4510 | BASF Dispersions & Resins | Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also di...voir plus Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also displays high water vapor permeability and low water absorption, which provides excellent long-term performance. The self-crosslinking mechanism of Acronal® 4510 imparts excellent dirt pick-up resistance and film strength while maintaining film elasticity at very low temperatures and varying film thicknesses. voir moins | |
| ACRONAL® A 110 | BASF Dispersions & Resins | Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins | |
| ACRONAL® A 145 | BASF Dispersions & Resins | Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® A 240 NA | BASF Dispersions & Resins | Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 245 | BASF Dispersions & Resins | Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® DS 3502 | BASF Dispersions & Resins | Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins | |
| ACRONAL® DS 3570 NA | BASF Dispersions & Resins | Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins | |
| ACRONAL® DS 3598 NA | BASF Dispersions & Resins | Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® LA 449 S | BASF Dispersions & Resins | Acronal® LA 449 S is an aqueous polymer dispersion for the manufacture of pressure sensitive adhesives for self-adhesive articles. | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2278 X | BASF Dispersions & Resins | Acronal® NX 2278 is an APEO-free, self-cross linking, aqueous adhesive dispersion used for the manufacture of pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® NX 4021 | BASF Dispersions & Resins | Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability. | |
| ACRONAL® NX 4569 | BASF Dispersions & Resins | Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins | |
| ACRONAL® NX 5818 | BASF Dispersions & Resins | Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins | |
| ACRONAL® S 504 NA | BASF Dispersions & Resins | Acronal® S 504 na is a versatile dispersion used as the base polymer for paper strengthening via saturation, and also finds utility as a binder in sound damping and adhesives applications. | |
| ACRONAL® V 210 NA | BASF Dispersions & Resins | Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia. | |
| ACRONAL® V 275 NA | BASF Dispersions & Resins | Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free. | |
| BASONAT® F 200 WD | BASF Dispersions & Resins | Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins | |
| BASONAT® LR 9056 | BASF Dispersions & Resins | Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...voir plus Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. voir moins | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| BUTOFAN® NS 144 | BASF Dispersions & Resins | Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 166 | BASF Dispersions & Resins | Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...voir plus Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate voir moins | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...voir plus Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...voir plus Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. voir moins | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...voir plus Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...voir plus Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. voir moins | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...voir plus Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). voir moins | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...voir plus Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). voir moins | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...voir plus Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . voir moins | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...voir plus Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. voir moins | |
| EkaSol 1™ | TBF Environmental Technology Inc. | EkaSol 1™ is an environmentally friendly solvent that is non-carcinogenic and benzene free. It is VOC-exempt in 49 states. This product has excellent solvency and solubility. These attributes make it an ideal product to be used in the following ways: pain...voir plus EkaSol 1™ is an environmentally friendly solvent that is non-carcinogenic and benzene free. It is VOC-exempt in 49 states. This product has excellent solvency and solubility. These attributes make it an ideal product to be used in the following ways: paints and coating formulations, ink and marker formulations, adhesives, adhesive removers. voir moins | |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...voir plus Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. voir moins | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...voir plus Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. voir moins | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF SE, Intermediates Division | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...voir plus Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating voir moins | |
| Imidazole | BASF SE, Intermediates Division | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...voir plus Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. voir moins | |
| IRGASTAB® UV 22 | BASF Dispersions & Resins | Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...voir plus Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...voir plus Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. voir moins | |
| JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Ad...voir plus JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| LUPHEN® D 207 E | BASF Dispersions & Resins | Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack...voir plus Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack life. voir moins | |
| LUPHEN® D 259 U | BASF Dispersions & Resins | Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins |
