UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
Acronal® 4032 X BASF Dispersions & Resins Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels.
Acronal® 4053 X BASF Dispersions & Resins Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending.
Acronal® A 110 BASF Dispersions & Resins Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins
Acronal® A 145 BASF Dispersions & Resins Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 220 na BASF Dispersions & Resins Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® A 240 na BASF Dispersions & Resins Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 310 S BASF Dispersions & Resins Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film...voir plus Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film lamination. It adheres well to suitably treated olefinic surfaces. Polyolefin film should always be given a corona discharge treatment before applying adhesives. If PVC films are laminated, any plasticizer they may contain can migrate into the adhesive layer and weaken the bond. Adhesives made from Acronal® A 310 S crosslink at room temperature once they have dried. This results in an increase in cohesion, which gives laminating adhesives good resistance to piping. voir moins
Acronal® DS 3502 BASF Dispersions & Resins Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins
Acronal® DS 3570 na BASF Dispersions & Resins Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins
Acronal® DS 3598 na BASF Dispersions & Resins Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® N 284 na BASF Dispersions & Resins Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins
Acronal® NX 2160 BASF Dispersions & Resins Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins
Acronal® NX 2278 X BASF Dispersions & Resins Acronal® NX 2278 X is an acrylic dispersion polymer with excellent removability for film label applications. It also offers good plasticizer resistance, high shear, and self-crosslinking benefits.
Acronal® NX 4021 BASF Dispersions & Resins Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability.
Acronal® NX 4569 BASF Dispersions & Resins Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins
Acronal® NX 5818 BASF Dispersions & Resins Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins
Acronal® V 210 na BASF Dispersions & Resins Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia.
Acronal® V 275 na BASF Dispersions & Resins Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free.
Basonat® F 200 WD BASF Dispersions & Resins Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins
Basonat® HW 100 BASF Dispersions & Resins Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of a...voir plus Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of about 10 parts Basonat HW 100 to 100 parts dispersion (solids on solids) will suffice. However, the best mixing ratio for a particular formulation is usually found empirically. The polyisocyanate is easier to distribute if it is first dissolved with 10 - 20% of the solvent that is used as a film-forming agent for the polymer dispersion. voir moins
Basonat® LR 9056 BASF Dispersions & Resins Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins
Butofan® NS 144 BASF Dispersions & Resins Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 166 BASF Dispersions & Resins Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 209 BASF Dispersions & Resins Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins
Butofan® NS 222 BASF Dispersions & Resins Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO.
Butonal® NS 175 BASF Dispersions & Resins Butonal® NS 175 is an anionic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It is non-APEO and non-ammonia.
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
Epotal® P100 ECO BASF Dispersions & Resins Epotal® P100 ECO is an aqueous dispersion of a polyester-polyurethane elastomer. It is particularly suited for the production of multi-layer films based on a broad variety of compostable films and paper. The laminate has a high initial bond strength enabl...voir plus Epotal® P100 ECO is an aqueous dispersion of a polyester-polyurethane elastomer. It is particularly suited for the production of multi-layer films based on a broad variety of compostable films and paper. The laminate has a high initial bond strength enabling direct further converting. voir moins
Irgastab® UV 22 BASF Dispersions & Resins Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
LX®-1035 Resin Neville Chemical Company LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.
LX®-2161 Resin Neville Chemical Company LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins
LX®-238 Resin Neville Chemical Company LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins
Luphen® D 259 U BASF Dispersions & Resins Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins
NEVCHEM® 100 Neville Chemical Company NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins
NEVCHEM® 110 Neville Chemical Company NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins
NEVCHEM® 120 Neville Chemical Company NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 130 Neville Chemical Company NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins
NEVCHEM® 140 Neville Chemical Company NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 150 Neville Chemical Company NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins
NEVCHEM® 200 Neville Chemical Company NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins
NEVCHEM® 220 Neville Chemical Company NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins
NEVCHEM® 240 Neville Chemical Company NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins
NEVCHEM® 250 Neville Chemical Company NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins
NEVEX® 1069 Neville Chemical Company NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins
NEVPENE® 9545 Neville Chemical Company NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins
NEVTAC® 10 Neville Chemical Company NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers.
Request Sample RF 10 Resin Formulators (E.V. Roberts) RF 10 curing agent is a technical grade of tris-(dimethylaminomethyl) phenol, a versatile Lewis Base catalyst for curing epoxy resins. It is used both as a curing agent (adhesives applications) and as an activator for other curing agents including amidoam...voir plus RF 10 curing agent is a technical grade of tris-(dimethylaminomethyl) phenol, a versatile Lewis Base catalyst for curing epoxy resins. It is used both as a curing agent (adhesives applications) and as an activator for other curing agents including amidoamines, amine adducts and polyamides. It is also the preferred catalyst for blends of liquid epoxy resin and liquid polysulfides for body solder, sealant and concrete adhesives applications. Also, it is a highly efficient catalyst for epoxy resins cured with polycarboxylic acids and anhydrides. voir moins
Request Sample RF 1120 A/B Resin Formulators (E.V. Roberts) RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed an...voir plus RF 1120 A/B is a two-part epoxy adhesive system for bonding a wide variety of substrates. This product is thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1120 is also supplied in a one part premixed and frozen form. RF 1120 Blue is manufactured to MT-5-20. voir moins
Request Sample RF 1141 A/B Resin Formulators (E.V. Roberts) RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in S...voir plus RF 1141 A/B is a two-part low-density epoxy syntactic system. It is qualified to SCGMS 58001, Type 2, Class 1 or Class 2. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out. RF 1141 can be supplied in Semkits. voir moins
Request Sample RF 1144 A/B Kit Resin Formulators (E.V. Roberts) RF 1144 A/B Kit is a two-part heat cured, low density, high strength, syntactic system that is formulated for continuous service at high temperatures. RF 1144 has excellent mechanical properties up to 350°F.
Request Sample RF 1350M4 A/B Resin Formulators (E.V. Roberts) RF 1350M4 A/B is a two-part, quick curing, natural colored urethane adhesive/potting system. It has a shore A hardness between 60-65. This system was developed for potting connectors; small electronic components were flexibility is needed. RF 1350M4 A/B d...voir plus RF 1350M4 A/B is a two-part, quick curing, natural colored urethane adhesive/potting system. It has a shore A hardness between 60-65. This system was developed for potting connectors; small electronic components were flexibility is needed. RF 1350M4 A/B does not contain TDI or MOCA, and is easily mixed into a pourable material. When cured, this urethane system produces a flexible elastomer with excellent toughness, high elongation, and has very good adhesive strength to a variety of plastics. voir moins
Request Sample RF 1366 Resin Formulators (E.V. Roberts) RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properti...voir plus RF 1366 is a medium viscosity standard epoxy resin designed for potting, encapsulating and filament winding. It can be used with a wide variety of curing agents to generate products with a broad range of work lives, cure conditions and mechanical properties. This system can be cured in high humidity and low temperatures and produces a hard glossy surface. RF 1366 offers very good wet out and can produce a high strength laminate. In addition, this resin can be used for coating, potting and encapsulating small electronic components and exhibits good electrical properties. voir moins
Request Sample RF 1386 A/B Kit Resin Formulators (E.V. Roberts) RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for u...voir plus RF 1386 A/B Kit is a two-part, thixotropic, high strength epoxy adhesive system designed for use in food packaging and water filtration applications and meets the requirements of provision 21 CFR 175.105. The raw materials used in RF 1386 are listed for use in “Food Packaging Adhesive” applications and are classified as FDA Approved under the same provision. It has excellent wet out and can easily penetrate fibrous substrates. RF 1386 has exceptional adhesive strength to a wide variety of substrates, including membranes, separators and other material used in reverse osmosis. voir moins
Request Sample RF 1392 A/B Resin Formulators (E.V. Roberts) RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excel...voir plus RF 1392 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1392 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. voir moins
Request Sample RF 1393 A/B Resin Formulators (E.V. Roberts) RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excel...voir plus RF 1393 A/B is a medium fast curing toughened epoxy adhesive system for bonding a wide variety of substrates. This product is slightly thixotropic, and so can be used on vertical surfaces without excessive run out from the bond line. RF 1393 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 1393 A/B has been used to bond Fluorocarbon sheeting to steel structures. voir moins
Request Sample RF 14 Resin Formulators (E.V. Roberts) RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, i...voir plus RF 14 is a standard polyamine (TETA) curing agent for use with liquid epoxy resins. It provides rapid cures at ambient temperature, excellent chemical resistance and intermediate temperature resistance. Compared with DETA, it has a lower vapor pressure, is somewhat less hygroscopic and does not carbamate as readily. voir moins
Request Sample RF 1591BK A/B Resin Formulators (E.V. Roberts) RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of sub...voir plus RF 1591BK A/B is a low viscosity potting system. This system will meet the UL 94V-0 burn test as a self-extinguishing system. RF 1591BK A/B has good thermal conductivity, chemical and thermal shock resistance. It has very good adhesion to a variety of substrates. voir moins
Request Sample RF 1710 A/B Resin Formulators (E.V. Roberts) RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks...voir plus RF 1710 A/B is a two-component polyurethane rigid foam system. It was formulated to resist high temperatures. It is also CFC free. This resin system is used whenever rigid closed cell foam is needed. Applications include thermal insulation of pipes, tanks, and panels. voir moins
Request Sample RF 1735 A/B Resin Formulators (E.V. Roberts) RF 1735 is an easy-to-use, two-part, medium-soft (Shore 60A), high temperature, urethane potting compound. It does not contain TDI or MOCA. This product is also available in a blue version as RF 1735 Blue Mod-1, all other properties are identical. RF 1735...voir plus RF 1735 is an easy-to-use, two-part, medium-soft (Shore 60A), high temperature, urethane potting compound. It does not contain TDI or MOCA. This product is also available in a blue version as RF 1735 Blue Mod-1, all other properties are identical. RF 1735 has excellent hydrolytic stability. Thirty days at 100°C and 95% relative humidity has little effect on the properties. Thermal stability is exceptional, with intermittent temperatures as high as 150°C causing little or no degradation. The material remains thermally stable to temperatures well below -60°F (50°C) with a brittle point less than -60°C. Excursions well below the brittle point have no effect on the physical properties of the polymer. voir moins
Request Sample RF 1902 (AS) A/B Kit Resin Formulators (E.V. Roberts) RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machin...voir plus RF 1902 (AS) A/B Kit is a low viscosity, low density, epoxy system designed for potting and encapsulating. This product is pourable when mixed and will cure at room temperature. This system will bond to a wide variety of substrates. Castings can be machined or sanded within 16 to 24 hours. voir moins
Request Sample RF 2108 A/B Resin Formulators (E.V. Roberts) RF 2108 A/B is an epoxy adhesive system for bonding a wide variety of substrates. This product is a reduced viscosity version of RF 912 and is slightly thixotropic. RF 2108 part A is composed of a Bis-Phenol-A epoxy resin blend with suitable inert fillers...voir plus RF 2108 A/B is an epoxy adhesive system for bonding a wide variety of substrates. This product is a reduced viscosity version of RF 912 and is slightly thixotropic. RF 2108 part A is composed of a Bis-Phenol-A epoxy resin blend with suitable inert fillers. RF 2108 part B is a blend of polyamide resins and suitable fillers. There are no solvents or any other chemical present that would cause any incompatibility with plastic substrates. voir moins
Request Sample RF 2388 1-Component Resin Formulators (E.V. Roberts) RF 2388 is a 1-Component anti-corrosion paste adhesive system for aluminum substrates with excellent high temperature properties.
Request Sample RF 24 Resin Formulators (E.V. Roberts) RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, ...voir plus RF 24 is a cycloaliphatic amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life and high glass transition temperature (Tg). Because of its light color, absence of staining and excellent physical properties, it is recommended has a replacement for aromatic amines. voir moins
Request Sample RF 2869 Mod 2 Resin Formulators (E.V. Roberts) RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three m...voir plus RF 2869 Mod 2 is a one-part, silver filled, electrically conductive epoxy adhesive. This system does not require mixing or vacuum degassing. Cure is achieved at temperatures as low as 82°C (180°F) for one hour or a short dwell at 121°C (250°F) for three minutes. Because RF 2869 Mod 2 is already vacuum degassed during manufacturing and no mixing is required, a void free casting or bond line is easily achieved. When cured, this adhesive will have very high thermal and electrical conductive properties. voir moins
Request Sample RF 2969 (Mod 4) A/B Kit Resin Formulators (E.V. Roberts) RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to h...voir plus RF 2969 (Mod 4) A/B Kit is a thixotropic, high strength epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 2969 (Mod 4) is also effective as a shielding material. Open working time is 45 minutes and full cure is achieved in 24 hours at room temperature. voir moins
Request Sample RF 2970 A/B Resin Formulators (E.V. Roberts) RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be sub...voir plus RF 2970 A/B is a thixotropic, fast setting, high strength epoxy adhesive with good physical strength and high electrical conductivity. This material is designed for applications where hot solder applications are impractical or on parts which cannot be subjected to heat. voir moins
Request Sample RF 30 Resin Formulators (E.V. Roberts) RF 35 is a di-functional polyglycol amine curing agent used to cure various epoxy resins at elevated temperatures. This particular curing agent offers light color, low viscosity, long pot life, high elongation and excellent thermal shock resistance.
Request Sample RF 3000 Resin Formulators (E.V. Roberts) RF 3000 is a modified low viscosity Bisphenol A epoxy resin. It has viscosity of 500-700 cps at 77°F.
Request Sample RF 32 Resin Formulators (E.V. Roberts) RF 35 is a modified aromatic amine. It offers long pot life coupled with rapid cure response. RF 32 is non-staining and has physical properties and chemical resistances equivalent to MDA cured resins.
Request Sample RF 4010 Resin Formulators (E.V. Roberts) RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl ...voir plus RF 4010 is medium viscosity modified bisphenol A epoxy. It is suitable for laminating, potting and RTM applications. The diluent in RF 4010 was chosen to minimize the effect on Tg, chemical resistance and reduce skin irritation. It does not contain butyl glycidyl ether (BGE) or cresyl glycidyl ether (CGE). The cured properties of RF 4010 will depend on the choice of hardener. voir moins
Request Sample RF 4407 Resin Formulators (E.V. Roberts) RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407...voir plus RF 4407 is a filled epoxy resin designed for potting or casting applications. Various curing agents can be used to achieve particular end properties. Regardless of which curing agent is used, the end product will be a thermally conductive plastic. RF 4407 can be colored with any of the RF color concentrates. RF 4407-130 is colored black, RF 4407-139 is the white version. RF 4408 is the thixotropic version of RF 4407 when a soft paste is required prior to cure. voir moins
Request Sample RF 46 Resin Formulators (E.V. Roberts) RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durabl...voir plus RF 46 is a standard, medium viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios it cures to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. voir moins
Request Sample RF 47 Resin Formulators (E.V. Roberts) RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, dur...voir plus RF 47 is a standard, medium viscosity, polyamide resins for ambient curing of epoxy resins. They are intended as equivalent “drop-ins” for Versamid 125 and can be used without formulation changes. When mixed at stoichiometric ratios they cure to hard, durable, moisture and chemical resistant plastics. The ratios can be extended to 1:1 by weight to improve flexibility. RF 47 complies with FDA 21 CFR 175.300, 21 CFR 176.170 and 21 CFR 175.105. RF 46 is a TETA free version of RF 47. voir moins
Request Sample RF 5000 Resin Formulators (E.V. Roberts) RF 5000 is a standard viscosity Bisphenol A epoxy resin. It has a viscosity of 11,000-15,000 cps at 77°F.
Request Sample RF 5061 A/B Kit Resin Formulators (E.V. Roberts) RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 15...voir plus RF 5061 A/B Kit is a two-part, semi-thixotropic epoxy paste designed for bonding soft, semi-porous materials such as wood, ceramic or composites. RF 5061 (Mod 1) and (Mod 2) are accelerated versions of RF 5061 that reduce fixturing time. When heated to 150°F, RF 5061 (Mod 1) can be handled and machined after 15-20 minutes. voir moins
Request Sample RF 53 Resin Formulators (E.V. Roberts) RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerat...voir plus RF 53 is a bi-cyclic anhydride that offers exceptionally long pot life and very high Tg. It cures into a highly temperature resistant plastic and it used for high temperature filament winding and RTM/VARTM applications. RF 53 requires a suitable accelerator such as RF 22 or RF 80. voir moins
Request Sample RF 5407 Resin Formulators (E.V. Roberts) RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several poten...voir plus RF 5407 is an easy-to-use, aluminum oxide, liquid epoxy resin with excellent electrical insulation properties and high thermal conductivity. RF 5407 can be cured with nearly any hardener to produce a wide range of properties and cure cycles. Several potential curing agents are listed below. Regardless of which curing agent is selected, the resultant plastic will have low shrinkage during cure, excellent thermal stability and conductivity, and be a strong and durable casting. voir moins
Request Sample RF 6002 Resin Formulators (E.V. Roberts) RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final ...voir plus RF 6002 is a modified Novolac epoxy resin. It offers improved Tg and chemical resistance versus standard bisphenol A epoxies. RF 6002 has a medium-low viscosity and is suitable for laminating, RTM and filament winding applications. The handling and final cure properties can be adjusted by the choice of curing agent. voir moins
Request Sample RF 61 Resin Formulators (E.V. Roberts) RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Diff...voir plus RF 61 is a polyamide curing agent for use with various epoxy resins. This specific curing agent is designed to add toughness and flexibility to cured epoxy resins. It has very good adhesive strength characteristics and will bond with most substrates. Different mix ratios will impart varying degrees of increasing flexibility to the cured systems. A mix with RF 61 will have at least a one hour pot life under normal conditions. Cure will take place at room temperature or, in small castings or adhesives, can be accelerated with heat. voir moins
Request Sample RF 6100 A/B Kit Resin Formulators (E.V. Roberts) RF 6100 A/B Kit is a medium viscosity, high temperature epoxy adhesive system for bonding metal and composite structures. RF 6100 has an open pot life of four hours and cures in one hour at 200°F.
Request Sample RF 62 Resin Formulators (E.V. Roberts) RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durabl...voir plus RF 62 is a standard, high viscosity, polyamide resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Versamid 115 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a tough, durable, moisture and chemical resistant plastic. RF 62 complies with FDA 21 CFR 175.300 and 21 CFR 175.105. voir moins
Request Sample RF 67 Resin Formulators (E.V. Roberts) RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent ...voir plus RF 67 curing agent is a polyfunctional, fatty amidoamine for use in curing liquid epoxy resins. It is intended as an equivalent “drop-in” for Genamid 2000 and can be used without formulation changes. Special features of this room temperature curing agent include relatively rapid cure rate, and the ability to cure in the presence of moisture. The mix ratio can be varied over a wide range to generate cured products that range from hard and rigid to soft and flexible. Appropriate applications include marine coatings, high-solids and solvent-free coatings, flooring, adhesives and laminates. It is approved for use in U.S. Navy Specification MILP-24441/Ships Coatings. voir moins
Request Sample RF 68 Resin Formulators (E.V. Roberts) RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a har...voir plus RF 68 is a standard, low viscosity, fatty acid amidoamine resin for ambient curing of epoxy resins. It is intended as an equivalent “drop-in” for Genamid 250 and can be used without formulation changes. When mixed at stoichiometric ratio it cures to a hard, durable, moisture and chemical resistant plastic. RF 68 is ideally suited for high solids formulations with low viscosity resins. It can be used in compliance with 21 CFR 175.300 and 21 CFR 176.170 as a component of FDA-compliant epoxy coatings, can cements and adhesives. voir moins
Request Sample RF 713 A/B Kit Resin Formulators (E.V. Roberts) RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is...voir plus RF 713 A/B Kit is a thixotropic epoxy adhesive system with good physical strength and high electrical conductivity. This material is designed to be used where hot solder applications are impractical or on parts which cannot be subjected to heat. RF 713 is also effective as a shielding material. voir moins
Request Sample RF 77 Resin Formulators (E.V. Roberts) RF 77 is a low-viscosity amine curing agent for use with liquid epoxy resins that provides rapid cure at ambient and temperatures as low as 32°F (0°C). It can also be used to accelerate other amine hardeners.
Request Sample RF 81 Resin Formulators (E.V. Roberts) RF 81 is a unique low viscosity polyamide hardener. It is compatible with most epoxy resins without induction and offers a shorter gel time than standard polyamide hardeners.
Request Sample RF 825 A/B Resin Formulators (E.V. Roberts) RF 825 A/B is a two component Epoxy compound used for potting electronic packages, generally with vacuum impregnation techniques. It is a high temperature resistant, low out gassing material which has been used in high voltage devices in space.
Request Sample RF 9 Resin Formulators (E.V. Roberts) RF 9 is an accelerated polyamide hardener. It offers better chemical resistance and a higher service temperature than standard polyamides.
Request Sample RF 912 A/B Kit Resin Formulators (E.V. Roberts) RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working...voir plus RF 912 A/B Kit is a high strength epoxy adhesive system for bonding a wide variety of substrates, including plastics. This product is thixotropic and can be used on vertical surfaces without excessive run out from the bond line. RF 912 has an open working time of 30 to 45 minutes and will cure at room temperature. voir moins
Request Sample RF 913 A/B Resin Formulators (E.V. Roberts) RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and ...voir plus RF 913 A/B is a toughened epoxy adhesive system for bonding a wide variety of substrates. This product is semi-thixotropic, and so can be used on vertical surfaces without excessive bleed from the bond line. RF 913 A/B has excellent adhesion to metal and plastic substrates as well as excellent water soak and environmental resistance. RF 913 is available in green (blue/yellow) and black. An electrical grade is also available. voir moins
Request Sample RF 955 A/B Resin Formulators (E.V. Roberts) RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of s...voir plus RF 955 A/B is an easy to mix, stiff paste, two-part, high strength, epoxy fairing compound. It is designed to hold up to a 1 inch peak before cure and is easily smoothed to a paintable surface. This high strength material bonds well to a wide variety of substrates, including most metals and most rigid plastics. voir moins
Request Sample RF 96 Resin Formulators (E.V. Roberts) RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwa...voir plus RF 96 curing agent is a modified cycloaliphatic amine designed for use with liquid epoxy resins. It also can be used to cure solid resins in solvent-based systems. RF 96 curing agent allows for cures at high humidity, low temperatures to 40 °F and underwater. voir moins
Request Sample RX 5004 A/B Resin Formulators (E.V. Roberts) RX 5004 A/B is fast setting, non-slump, general purpose adhesive for bonding a wide variety of substrates. It has a blue to green color.
Request Sample RX 5004 A/B Kit Resin Formulators (E.V. Roberts) RX 5004 A/B Kit is a fast setting, non-slump, general purpose epoxy adhesive system for bonding a wide variety of substrates. RX 5004 sets in as little as 10 minutes with full cure in 24 hours at room temperature.
Styrofan® NX 6690 X BASF Dispersions & Resins Styrofan® NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is ...voir plus Styrofan® NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is a low odor and an ammonia free dispersion. voir moins