UL Prospector

Succès!

Vous avez enregistré votre recherche avec succès
Acronal® 4032 X BASF Dispersions & Resins Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels.
Acronal® 4053 X BASF Dispersions & Resins Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending.
Acronal® A 110 BASF Dispersions & Resins Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins
Acronal® A 145 BASF Dispersions & Resins Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 220 na BASF Dispersions & Resins Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® A 240 na BASF Dispersions & Resins Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
Acronal® A 310 S BASF Dispersions & Resins Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film...voir plus Acronal® A 310 S is an aqueous dispersion of an acrylate copolymer that crosslinks at room temperature. It is a polymer dispersion for the manufacture of glossy film laminating adhesives. This product is used in the manufacture of adhesive for glossy film lamination. It adheres well to suitably treated olefinic surfaces. Polyolefin film should always be given a corona discharge treatment before applying adhesives. If PVC films are laminated, any plasticizer they may contain can migrate into the adhesive layer and weaken the bond. Adhesives made from Acronal® A 310 S crosslink at room temperature once they have dried. This results in an increase in cohesion, which gives laminating adhesives good resistance to piping. voir moins
Acronal® DS 3502 BASF Dispersions & Resins Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins
Acronal® DS 3570 na BASF Dispersions & Resins Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins
Acronal® DS 3598 na BASF Dispersions & Resins Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
Acronal® N 284 na BASF Dispersions & Resins Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins
Acronal® NX 2160 BASF Dispersions & Resins Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins
Acronal® NX 2278 X BASF Dispersions & Resins Acronal® NX 2278 X is an acrylic dispersion polymer with excellent removability for film label applications. It also offers good plasticizer resistance, high shear, and self-crosslinking benefits.
Acronal® NX 4021 BASF Dispersions & Resins Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability.
Acronal® NX 4569 BASF Dispersions & Resins Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins
Acronal® NX 5818 BASF Dispersions & Resins Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins
Acronal® V 210 na BASF Dispersions & Resins Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia.
Acronal® V 275 na BASF Dispersions & Resins Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free.
Basonat® F 200 WD BASF Dispersions & Resins Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins
Basonat® HW 100 BASF Dispersions & Resins Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of a...voir plus Basonat® HW 100 is a suitable hardener for polymer dispersions that contain reactive OH groups. It can be stirred directly into the dispersion formulation. The OH and NCO groups cannot be expected to react stoichiometrically. In general, the addition of about 10 parts Basonat HW 100 to 100 parts dispersion (solids on solids) will suffice. However, the best mixing ratio for a particular formulation is usually found empirically. The polyisocyanate is easier to distribute if it is first dissolved with 10 - 20% of the solvent that is used as a film-forming agent for the polymer dispersion. voir moins
Basonat® LR 9056 BASF Dispersions & Resins Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins
Butofan® NS 144 BASF Dispersions & Resins Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 166 BASF Dispersions & Resins Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
Butofan® NS 209 BASF Dispersions & Resins Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins
Butofan® NS 222 BASF Dispersions & Resins Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO.
Butonal® NS 175 BASF Dispersions & Resins Butonal® NS 175 is an anionic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It is non-APEO and non-ammonia.
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
Dow Corning® Class VI Elastomer C6-135 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...voir plus Dow Corning® Class VI Elastomer C6-135 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 35, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-150 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...voir plus Dow Corning® Class VI Elastomer C6-150 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 50, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-165 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...voir plus Dow Corning® Class VI Elastomer C6-165 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 65, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-180 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part ...voir plus Dow Corning® Class VI Elastomer C6-180 Parts A & B is a two-component kit, comprised of platinum-catalyzed silicone elastomers which must be thoroughly blended together prior to use. These high consistency rubber silicone elastomers are designed for part fabrication, extrusion, and medical devices, including those intended for implantation in humans for up to 29 days. This product has a nominal hardness of 80, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-235 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-235 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...voir plus Dow Corning® Class VI Elastomer C6-235 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 35, Shore A durometer. voir moins
Dow Corning® Class VI Elastomer C6-250 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-250 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...voir plus Dow Corning® Class VI Elastomer C6-250 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 50, Shore A durometer. voir moins
Dow Corning® Class VI Elastomer C6-265 Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-265 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a cat...voir plus Dow Corning® Class VI Elastomer C6-265 is an uncatalyzed silicone elastomer base designed for compounding into elastomer for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. The addition of a catalyst is necessary to accomplish cure. This product has a nominal hardness of 65, Shore A durometer. voir moins
Dow Corning® Class VI Elastomer C6-350LH Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-350LH Parts A & B is a platinum-catalyzed heat-cured silicone high consistency rubber for part fabrication, extrusion and medical devices, including those intended for implantation in humans for up to 29 days. It is supp...voir plus Dow Corning® Class VI Elastomer C6-350LH Parts A & B is a platinum-catalyzed heat-cured silicone high consistency rubber for part fabrication, extrusion and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product exhibits lower hysteresis losses (more resiliency) compared to other platinum-catalyzed HCRs, and a reduction in crack growth propagation. voir moins
Dow Corning® Class VI Elastomer C6-530 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-530 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...voir plus Dow Corning® Class VI Elastomer C6-530 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 30, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-540 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-540 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...voir plus Dow Corning® Class VI Elastomer C6-540 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 40, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-550 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-550 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...voir plus Dow Corning® Class VI Elastomer C6-550 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 50, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-560 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-560 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...voir plus Dow Corning® Class VI Elastomer C6-560 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 60, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-570 Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-570 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part k...voir plus Dow Corning® Class VI Elastomer C6-570 Parts A & B is a two-part platinum-catalyzed silicone elastomer designed for part fabrication and medical devices, including those intended for implantation in humans for up to 29 days. It is supplied as a two-part kit, equal portion of which must be thoroughly blended together prior to use. This product has a nominal hardness of 70, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...voir plus Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 40, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-750 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...voir plus Dow Corning® Class VI Elastomer C6-740 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 50, durometer, Shore A. voir moins
Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B Dow Corning Healthcare Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. I...voir plus Dow Corning® Class VI Elastomer C6-770 Liquid Silicone Rubber Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together before use. This product has a nominal hardness of 70, durometer, Shore A. voir moins
Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...voir plus Dow Corning® MG 7-9800 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has low adhesion on the skin. voir moins
Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...voir plus Dow Corning® MG 7-9850 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has medium adhesion on the skin. voir moins
Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B Dow Corning Healthcare Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications...voir plus Dow Corning® MG 7-9900 Soft Skin Adhesives Parts A & B is a two-part platinum catalyzed, fillerless silicone elastomers. The physical properties of these adhesives may be useful in producing cohesive and self-adhering materials for biomedical applications. This product has high adhesion on the skin. voir moins
Dow Corning® MG-2401 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2401 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...voir plus Dow Corning® MG-2401 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. voir moins
Dow Corning® MG-2402 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2402 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...voir plus Dow Corning® MG-2402 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. voir moins
Dow Corning® MG-2502 Silicone Adhesive Dow Corning Healthcare Dow Corning® MG-2502 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy ap...voir plus Dow Corning® MG-2502 Silicone Adhesive is a solvent-based silicone pressure sensitive adhesive. It may be used where a non-sensitizing adhesive is needed to adhere medical devices to the body. Known applications include adhering ileostomy and colostomy appliances, attaching appliances for patient monitoring, affixing surgical dressings and pads, adhering external prosthetic devices, and attaching hairpiece devices. voir moins
Dow Corning® QP1-30 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-30 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...voir plus Dow Corning® QP1-30 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. voir moins
Dow Corning® QP1-50 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-50 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...voir plus Dow Corning® QP1-50 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. voir moins
Dow Corning® QP1-60 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-60 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...voir plus Dow Corning® QP1-60 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. voir moins
Dow Corning® QP1-70 Silicone Elastomer Dow Corning Healthcare Dow Corning® QP1-70 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-...voir plus Dow Corning® QP1-70 Silicone Elastomer is an uncatalyzed material designed for compounding into elastomer used for part fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications. Once compounded with peroxide it can be used to fabricate parts by extrusion, calendaring or molding. When compounded and cured as indicated, the resulting elastomer consists of cross-linked dimethyl and methyl-vinyl siloxane copolymers and reinforcing silica. voir moins
Dow Corning® QPI-230 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...voir plus Dow Corning® QPI-230 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 30, durometer Shore A. voir moins
Dow Corning® QPI-240 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...voir plus Dow Corning® QPI-240 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 40, durometer Shore A. voir moins
Dow Corning® QPI-250 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...voir plus Dow Corning® QPI-250 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 50, durometer Shore A. voir moins
Dow Corning® QPI-260 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...voir plus Dow Corning® QPI-260 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 60, durometer Shore A. voir moins
Dow Corning® QPI-270 Liquid Silicone Rubber Kit Dow Corning Healthcare Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended togeth...voir plus Dow Corning® QPI-270 Liquid Silicone Rubber Kit is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding. Each elastomer is supplied in a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product is designed for the fabrication of medical devices and device components and for short term applications. It has a nominal hardness of 70, durometer Shore A. voir moins
Epotal® P100 ECO BASF Dispersions & Resins Epotal® P100 ECO is an aqueous dispersion of a polyester-polyurethane elastomer. It is particularly suited for the production of multi-layer films based on a broad variety of compostable films and paper. The laminate has a high initial bond strength enabl...voir plus Epotal® P100 ECO is an aqueous dispersion of a polyester-polyurethane elastomer. It is particularly suited for the production of multi-layer films based on a broad variety of compostable films and paper. The laminate has a high initial bond strength enabling direct further converting. voir moins
Irgastab® UV 22 BASF Dispersions & Resins Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins
KTR-100 Suparna Chemicals Ltd. KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins
KTR-118 Suparna Chemicals Ltd. KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins
KTR-123 Suparna Chemicals Ltd. KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins
LX®-1035 Resin Neville Chemical Company LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.
LX®-2161 Resin Neville Chemical Company LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins
LX®-238 Resin Neville Chemical Company LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins
Luphen® D 259 U BASF Dispersions & Resins Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins
NEVCHEM® 100 Neville Chemical Company NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins
NEVCHEM® 110 Neville Chemical Company NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins
NEVCHEM® 120 Neville Chemical Company NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 130 Neville Chemical Company NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins
NEVCHEM® 140 Neville Chemical Company NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins
NEVCHEM® 150 Neville Chemical Company NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins
NEVCHEM® 200 Neville Chemical Company NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins
NEVCHEM® 220 Neville Chemical Company NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins
NEVCHEM® 240 Neville Chemical Company NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins
NEVCHEM® 250 Neville Chemical Company NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins
NEVEX® 1069 Neville Chemical Company NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins
NEVPENE® 9545 Neville Chemical Company NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins
NEVTAC® 10 Neville Chemical Company NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers.
Silastic® BioMedical Grade ETR Elastomer Q7-4535 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4535 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4535 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 35, Shore A Durometer. voir moins
Silastic® BioMedical Grade ETR Elastomer Q7-4550 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4550 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4550 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 50, Shore A Durometer. voir moins
Silastic® BioMedical Grade ETR Elastomer Q7-4565 Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4565 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for p...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4565 is an uncatalyzed elastomer material designed for compounding into elastomer for part fabrication and medical devices. It is an enhanced tear resistant (ETR) high consistency rubber silicone elastomer for peroxide cure. THis produce has a nominal hardness of 65, Shore A Durometer. voir moins
Silastic® BioMedical Grade ETR Elastomer Q7-4720 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4720 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4720 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 20, Shore A durometer. voir moins
Silastic® BioMedical Grade ETR Elastomer Q7-4735 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4735 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4735 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 35, Shore A durometer. voir moins
Silastic® BioMedical Grade ETR Elastomer Q7-4750 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4750 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4750 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 50, Shore A durometer. voir moins
Silastic® BioMedical Grade ETR Elastomer Q7-4765 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4765 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4765 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 65, Shore A durometer. voir moins
Silastic® BioMedical Grade ETR Elastomer Q7-4780 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade ETR Elastomer Q7-4780 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricat...voir plus Silastic® BioMedical Grade ETR Elastomer Q7-4780 Parts A & B is a two-part, enhanced-tear-resistant (ETR) silicone elastomer that consists of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominal hardness of 80, Shore A durometer. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 40, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4850 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 50, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 60, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-4870 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 70, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6830 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 30, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6840 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 40, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which ...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-6860 Parts A & B is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. It is designed for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days. This product has a nominral hardness of 60, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7840 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 40, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7850 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 50, durometer Shore A. voir moins
Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B Dow Corning Healthcare Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is...voir plus Silastic® BioMedical Grade Liquid Silicone Rubber Q7-7870 Parts A & B is a heat-cured elastomer for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days and non-implant applications. It is supplied as a two-part kit, equal portions of which must be thoroughly blended together prior to use. This product has a nominal hardness of 70, durometer Shore A. voir moins