UL Prospector
Prospector

Succès!

Vous avez enregistré votre recherche avec succès
193 Résultats
1-Vinylimidazole, VIM BASF SE, Intermediates Division 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...voir plus 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins
1,2-Dimethylimidazole, Lupragen DMI BASF SE, Intermediates Division 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes.
1,3-Diaminopropane BASF SE, Intermediates Division 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives.
1,3-Dioxolane BASF SE, Intermediates Division 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxi...voir plus 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. It can also be used as a solvent in polyester film seaming. voir moins
1,4-Butanediol, BDO BASF SE, Intermediates Division 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins
1,4-Cyclohexane dimethanol divinyl ether, CHDM di BASF SE, Intermediates Division 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble.
1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono BASF SE, Intermediates Division 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins
1,5-Pentanediol, PDO BASF SE, Intermediates Division 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins
1,6-Hexanediol HDO® BASF SE, Intermediates Division 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins
1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 BASF SE, Intermediates Division 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins
2-(2-Aminoethoxy) ethanol BASF SE, Intermediates Division 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings.
2-Ethyl-4-Methylimidazole BASF SE, Intermediates Division 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes.
2-Ethylhexanoic Acid, 2-EHA BASF SE, Intermediates Division 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins
2-Ethylhexylvinylether, EHVE BASF SE, Intermediates Division 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins
2-Ethylimidazole BASF SE, Intermediates Division 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes.
2-Mercaptoethanol BASF SE, Intermediates Division 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings.
2-Methylimidazole BASF SE, Intermediates Division 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes.
2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD BASF SE, Intermediates Division 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks.
3-(Cyclohexylamino) propylamine BASF SE, Intermediates Division 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins
3-(Dimethylamino) propylamine BASF SE, Intermediates Division 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings.
3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan BASF SE, Intermediates Division 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins
4-Hydroxybutyl vinyl ether (HBVE) BASF SE, Intermediates Division 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins
4,4'-Diaminodicyclo-hexylmethane BASF SE, Intermediates Division 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins
4,4'-Methylenedianiline, MDA BASF SE, Intermediates Division 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins
4,7,10-Trioxatridecan- 1,13-diamine BASF SE, Intermediates Division 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins
4,9-Dioxadodecan- 1,12-diamine BASF SE, Intermediates Division 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins
ACRESIN® A 204 UV BASF Dispersions & Resins acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, w...voir plus acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, which require coat weights up to 80 g/m2 (3 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins
ACRESIN® A 250 UV BASF Dispersions & Resins acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins
ACRESIN® A 260 UV BASF Dispersions & Resins acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins
ACRESIN® UV 3532 BASF Dispersions & Resins acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weight...voir plus acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights up to ~40 g/m2 (1.5 mils). By virtue of its low glass transition temperature, it may also be used as a freezer grade adhesive in various applications. voir moins
ACRONAL® 3630 BASF Dispersions & Resins Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, t...voir plus Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. voir moins
ACRONAL® 3633 BASF Dispersions & Resins Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non...voir plus Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. voir moins
ACRONAL® 3636 X BASF Dispersions & Resins Acronal® 3636 X is an APEO-free, aqueous adhesive dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles.
ACRONAL® 4 D BASF Dispersions & Resins Acronal® 4 D is a dispersion of a polyacrylic acid butyl ester in water used to manufacture pressure-sensitive adhesives for self-adhesives articles.
ACRONAL® 4032 X BASF Dispersions & Resins Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels.
ACRONAL® 4034 BASF Dispersions & Resins Acronal® 4034 is a non-APEO containing acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesives labels and tapes.
ACRONAL® 4053 X BASF Dispersions & Resins Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending.
ACRONAL® 4510 BASF Dispersions & Resins Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also di...voir plus Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also displays high water vapor permeability and low water absorption, which provides excellent long-term performance. The self-crosslinking mechanism of Acronal® 4510 imparts excellent dirt pick-up resistance and film strength while maintaining film elasticity at very low temperatures and varying film thicknesses. voir moins
ACRONAL® A 110 BASF Dispersions & Resins Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins
ACRONAL® A 145 BASF Dispersions & Resins Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
ACRONAL® A 220 NA BASF Dispersions & Resins Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
ACRONAL® A 240 NA BASF Dispersions & Resins Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
ACRONAL® A 245 BASF Dispersions & Resins Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins
ACRONAL® DS 3502 BASF Dispersions & Resins Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins
ACRONAL® DS 3570 NA BASF Dispersions & Resins Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins
ACRONAL® DS 3598 NA BASF Dispersions & Resins Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins
ACRONAL® LA 449 S BASF Dispersions & Resins Acronal® LA 449 S is an aqueous polymer dispersion for the manufacture of pressure sensitive adhesives for self-adhesive articles.
ACRONAL® N 284 NA BASF Dispersions & Resins Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins
ACRONAL® NX 2160 BASF Dispersions & Resins Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins
ACRONAL® NX 2278 X BASF Dispersions & Resins Acronal® NX 2278 is an APEO-free, self-cross linking, aqueous adhesive dispersion used for the manufacture of pressure-sensitive adhesives for self-adhesive articles.
ACRONAL® NX 4021 BASF Dispersions & Resins Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability.
ACRONAL® NX 4569 BASF Dispersions & Resins Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins
ACRONAL® NX 5818 BASF Dispersions & Resins Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins
ACRONAL® S 504 NA BASF Dispersions & Resins Acronal® S 504 na is a versatile dispersion used as the base polymer for paper strengthening via saturation, and also finds utility as a binder in sound damping and adhesives applications.
ACRONAL® V 210 NA BASF Dispersions & Resins Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia.
ACRONAL® V 275 NA BASF Dispersions & Resins Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free.
BASONAT® F 200 WD BASF Dispersions & Resins Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins
BASONAT® LR 9056 BASF Dispersions & Resins Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins
Baxxodur™ EC 201 BASF SE, Intermediates Division Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...voir plus Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. voir moins
Baxxodur™ EC 301 BASF SE, Intermediates Division Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating.
Baxxodur™ EC 302 BASF SE, Intermediates Division Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener.
Baxxodur™ EC 110 BASF SE, Intermediates Division Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide.
Baxxodur™ EC 130 BASF SE, Intermediates Division Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination.
Baxxodur™ EC 252 BASF SE, Intermediates Division Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg.
Benzylamine BASF SE, Intermediates Division Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels.
BUTOFAN® NS 144 BASF Dispersions & Resins Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
BUTOFAN® NS 166 BASF Dispersions & Resins Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins
BUTOFAN® NS 209 BASF Dispersions & Resins Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins
BUTOFAN® NS 222 BASF Dispersions & Resins Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO.
Capromer™ PD1–10 BASF SE, Intermediates Division Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins
Capromer™ PD1–10 A BASF SE, Intermediates Division Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...voir plus Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins
Capromer™ PD1–20 BASF SE, Intermediates Division Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate voir moins
Capromer™ PD1–20 A BASF SE, Intermediates Division Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...voir plus Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins
Capromer™ PD4-05 (PolyCLO DEG550) BASF SE, Intermediates Division Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...voir plus Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. voir moins
Capromer™ PT1–05 (PolyCLO TMP540) BASF SE, Intermediates Division Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...voir plus Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates voir moins
CUMAR® 105 Neville Chemical Company CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins
Cyclohexyl vinyl ether, CHVE BASF SE, Intermediates Division Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...voir plus Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. voir moins
Deuteron LE 100 LV Antistatic Agent P.A.T. Products Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins Request Sample
Deuteron MK Matting Agent P.A.T. Products Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins Request Sample
Deuteron MK-F Matting Agent P.A.T. Products Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins Request Sample
Deuteron MK-F6 Matting Agent P.A.T. Products Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins Request Sample
Deuteron MM 659 Matting Agent for UV Systems P.A.T. Products Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins Request Sample
Deuteron MM 677 Aqueous Matting Liquid P.A.T. Products Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins Request Sample
Deuteron MM 823 Scratch Resistance Additive P.A.T. Products Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins Request Sample
Deuteron PMH C Thermoset Matting Agent P.A.T. Products Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins Request Sample
Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins Request Sample
Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins Request Sample
Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems P.A.T. Products Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems.  Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins Request Sample
Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 BASF SE, Intermediates Division Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...voir plus Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). voir moins
Diethanolamine, pure BASF SE, Intermediates Division Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings.
Diethylene triamine BASF SE, Intermediates Division Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...voir plus Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). voir moins
Diethyleneglycol divinyl ether, DVE-2 BASF SE, Intermediates Division Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...voir plus Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . voir moins
Diisopropanolamine BASF SE, Intermediates Division Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...voir plus Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. voir moins
epsilon-Caprolactone, CLO BASF SE, Intermediates Division Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...voir plus Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. voir moins
Ethylene diamine BASF SE, Intermediates Division Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...voir plus Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. voir moins
Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone BASF SE, Intermediates Division Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates.
Formic acid BASF SE, Intermediates Division Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins.
Hydroxypivalic acid neopentylglycolester, HPN BASF SE, Intermediates Division Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...voir plus Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating voir moins
Imidazole BASF SE, Intermediates Division Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...voir plus Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. voir moins
IRGASTAB® UV 22 BASF Dispersions & Resins Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins