| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...voir plus Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...voir plus Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. voir moins | |
| JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Ad...voir plus JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| LUPHEN® D 207 E | BASF Dispersions & Resins | Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack...voir plus Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack life. voir moins | |
| LUPHEN® D 259 U | BASF Dispersions & Resins | Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF SE, Intermediates Division | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modifi...voir plus N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. voir moins | |
| N-Dodecyl vinyl ether, DDVE | BASF SE, Intermediates Division | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...voir plus N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. voir moins | |
| N-Ethylpyrrolidone, NEP | BASF SE, Intermediates Division | N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...voir plus N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. voir moins | |
| N-Methylethanolamine | BASF SE, Intermediates Division | N-Methylethanolamine is a building block for the modification of epoxy resins. Methylethanolamine modified epoxy resins are suited for cationic electro deposition coatings. | |
| N-Methylpyrrolidone, NMP | BASF SE, Intermediates Division | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...voir plus N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. voir moins | |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...voir plus N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. voir moins | |
| N-Vinyl-Caprolactam, NVC | BASF SE, Intermediates Division | N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototypin...voir plus N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototyping. N-Vinylcaprolactame, is a co-monomer for hydrophobic modified PVP (Polyvinylpyrrolidone) especially used in oilfield, cosmetics and adhesives. voir moins | |
| N-Vinylpyrrolidone, NVP | BASF SE, Intermediates Division | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...voir plus N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. voir moins | |
| Neopentane diamine | BASF SE, Intermediates Division | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...voir plus Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | BASF SE, Intermediates Division | N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equ...voir plus N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equivalent weight, N,N'-Bis-(3-aminopropyl)-ethylene diamine enables high cross linking density. voir moins | |
| N,N-BIS(3-Aminopropyl)-methylamine | BASF SE, Intermediates Division | N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized...voir plus N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized polyurethane dispersions. voir moins | |
| N,N-DI-(2-hydroxyethyl) aniline | BASF SE, Intermediates Division | N,N-DI-(2-hydroxyethyl) aniline is an accelerator for radical initiated polymerization of unsaturated polyesters. Catalyst for epoxy reactions. | |
| N,N-Diethylethanol-amine | BASF SE, Intermediates Division | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...voir plus N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. voir moins | |
| N,N-Diisopropanol-P-toluidine | BASF SE, Intermediates Division | N,N-Diisopropanol-P-toluidine is an accelerator for radical initiated polymerization of unsaturated polyesters, Catalyst for epoxy reactions. Coatings technology for composite production. | |
| N,N-Dimethylbenzyl-amine Lupragen® N 103 | BASF SE, Intermediates Division | N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...voir plus N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). voir moins | |
| N,N-Dimethylcyclohexyl-amine Lupragen® N 100 | BASF SE, Intermediates Division | N,N-Dimethylcyclohexyl-amine Lupragen® N 100 is a catalyst for isocyanate reactions. Coatings technology for polyurethane resin production. | |
| N,N-Dimethylethanol-amine Lupragen® N 101 | BASF SE, Intermediates Division | N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints...voir plus N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes. voir moins | |
| NPG, Neol® Neopentylglycol | BASF SE, Intermediates Division | NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for p...voir plus NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for plastic coatings and for repair coatings. Neopentyl-glycol is used for water borne polyesters for automotive coatings, repair coatings and coatings for general industry. It is also used for polyesters for powder coatings. Neopentylglycol shows high reactivity for esterification and trans-esterification. Neopentylglycol introduces solubility and compatibility into polyester molecules, avoiding crystallinity. NNeopentylglycol offers high chemical, thermal and UV resistance. Polyesters show good hardness and excellent weather resistance. voir moins | |
| Polyetheramine D 2000 | BASF SE, Intermediates Division | Polyetheramine D 2000 is a flexible cross linker for epoxy resins and a building block for polyisocyanates. Polyetheramine D 2000 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes a...voir plus Polyetheramine D 2000 is a flexible cross linker for epoxy resins and a building block for polyisocyanates. Polyetheramine D 2000 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and industrial constructions. Polyetheramine D 2000 improves flexibility and chemical resistance. voir moins | |
| Polyetheramine D 230 | BASF SE, Intermediates Division | Polyetheramine D 230 is a flexible cross linker for epoxy resins and a building block for polyisocyanates. Polyetheramine D 230 is used for two component (2K) epoxy coatings and as component for polyurea coatings, floor coatings, pipes and industrial con...voir plus Polyetheramine D 230 is a flexible cross linker for epoxy resins and a building block for polyisocyanates. Polyetheramine D 230 is used for two component (2K) epoxy coatings and as component for polyurea coatings, floor coatings, pipes and industrial constructions. Polyetheramine D 230 improves flexibility and chemical resistance. voir moins | |
| Polyetheramine D 400 | BASF SE, Intermediates Division | Polyetheramine D 400 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine D 400 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and indu...voir plus Polyetheramine D 400 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine D 400 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and industrial constructions. Polyetheramine D 400 improves flexibility and chemical resistance. voir moins | |
| Polyetheramine T 403 | BASF SE, Intermediates Division | Polyetheramine T 403 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine T 403 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and indu...voir plus Polyetheramine T 403 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine T 403 is used for two component (2K) epoxy coatings and as component for polyurea coatings. It is used for floor coatings, pipes and industrial constructions. Polyetheramine T 403 improves flexibility and chemical resistance. voir moins | |
| Polyetheramine T 5000 | BASF SE, Intermediates Division | Polyetheramine T 5000 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine T 5000 is used for two component (2K) epoxy coatings and as component for polyurea coatings, both used for floor coatings, pipes and ind...voir plus Polyetheramine T 5000 is a flexible cross linker for epoxy resins, building block for polyisocyanates. Polyetheramine T 5000 is used for two component (2K) epoxy coatings and as component for polyurea coatings, both used for floor coatings, pipes and industrial constructions. Polyetheramine T 5000 improves flexibility and chemical resistance. voir moins | |
| Polythf® 1000, 1000 S (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into...voir plus PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into polymer molecules. voir moins | |
| Polythf® 1400 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1400 is building block for plasticizer, and soft segment of poly-urethane dispersions. Polymers with PolyTHF® 1400 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1400 introduces high flexibility into polymer molecules. | |
| Polythf® 1800 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1800 is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1800 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1800 introduces high flexibility into polymer molecules. | |
| PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. ...voir plus PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce high flexibility into polymer molecules. voir moins | |
| PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment for polyurethane dispersions. Polymers with PolyTHF® 250 techn. are suitable for plastic-, foil- and leather coatings. PolyTHF...voir plus PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment for polyurethane dispersions. Polymers with PolyTHF® 250 techn. are suitable for plastic-, foil- and leather coatings. PolyTHF® 250 techn. introduces flexibility into polymer molecules. voir moins | |
| PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 650 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 650 S int...voir plus PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 650 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 650 S introduces flexibility into polymer molecules. voir moins | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins | Request Sample |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins | Request Sample |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins | Request Sample |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | Request Sample |
| Proglyme | BASF SE, Intermediates Division | Ethyl diglyme (diethylene glycol diethyl ether) is a suitable solvent for emissive applications like digital ink formulations. This water soluble, low odor aprotic solvent offers high solvency and dispersancy for pigments and dyes, while preventing clogg...voir plus Ethyl diglyme (diethylene glycol diethyl ether) is a suitable solvent for emissive applications like digital ink formulations. This water soluble, low odor aprotic solvent offers high solvency and dispersancy for pigments and dyes, while preventing clogging of printer heads. voir moins | |
| Propylene carbonate | BASF SE, Intermediates Division | Propylene carbonate solvent for polar resins ( i.e. polyesters, polyurethanes, polyester imides and plasticizers). Propylene carbonate is suitable for wire enamels based on polyesters, polyurethanes, polyesterimides, epoxy and phenol resins. Propylene c...voir plus Propylene carbonate solvent for polar resins ( i.e. polyesters, polyurethanes, polyester imides and plasticizers). Propylene carbonate is suitable for wire enamels based on polyesters, polyurethanes, polyesterimides, epoxy and phenol resins. Propylene carbonate is a highly polar solvent. A modified version, Solvarnol® PCA may replace phenol, cresols and xylenols in electro insulation formulations. voir moins | |
| STYROFAN® NX 6690 X | BASF Dispersions & Resins | Styrofan® NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is ...voir plus Styrofan® NX 6690 X is a carboxylated styrene/butadiene dispersion. It is a low odor, ammonia free dispersion that is used in the formulation of laminating adhesives. It provides toughness and water resistance in the finished formulation. This product is a low odor and an ammonia free dispersion. voir moins | |
| STYRONAL® ND 430 | BASF Dispersions & Resins | Styronal® ND 430 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer used in the formulation of industrial adhesives for combining and laminating. It has outstanding mechanical and chemical stability. This product displays excellent adh...voir plus Styronal® ND 430 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer used in the formulation of industrial adhesives for combining and laminating. It has outstanding mechanical and chemical stability. This product displays excellent adhesion and serves as the base for foil to kraft wet laminating adhesives in conjunction with casein. voir moins | |
| STYRONAL® ND 811 | BASF Dispersions & Resins | Styronal® ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness....voir plus Styronal® ND 811 is a very stiff carboxylated styene/butadiene dispersion used as a binder for nonwoven and coating applications. It is a mechanically and chemically stable modifier in laminating adhesive formulations. It provides stiffness and toughness. Styronal® ND 811 may also be used as a glossing additive for both paper and paperboard coatings. voir moins | |
| STYRONAL® NX 4222 X | BASF Dispersions & Resins | Styronal® NX 4222 X is a carboxylated styrene/butadiene dispersion. It is recommended to add a preservative to adhesives and coating materials that contain Styronal® NX 4222 X to protect them from microbial attack, particularly if their pH lies in the neu...voir plus Styronal® NX 4222 X is a carboxylated styrene/butadiene dispersion. It is recommended to add a preservative to adhesives and coating materials that contain Styronal® NX 4222 X to protect them from microbial attack, particularly if their pH lies in the neutral range. The suitability of such additives must be verified and monitored in trials. voir moins | |
| tert.-Amyl alcohol | BASF SE, Intermediates Division | Tert.-Amyl alcohol special solvent for coatings. Tert.-Amyl alcohol is suitable for two-components (2K) polyurethane coatings (automotive repair coatings, plastic coatings). It increases the pot-life of two-component (2K) coatings. | |
| tert.-Butylvinylether, t-BVE | BASF SE, Intermediates Division | Tert.-Butylvinylether, t-BVE monomer for copolymers with vinyl chlorides. T-Butyl vinyl groups in polymers can be easily transferred in hydroxyl function (protective group). Copolymers with t-Butyl vinyl ether are used for solvent based anti-corrosion co...voir plus Tert.-Butylvinylether, t-BVE monomer for copolymers with vinyl chlorides. T-Butyl vinyl groups in polymers can be easily transferred in hydroxyl function (protective group). Copolymers with t-Butyl vinyl ether are used for solvent based anti-corrosion coating. voir moins | |
| Tetraglyme | BASF SE, Intermediates Division | Tetraglyme (tetraethylene glycol dimethyl ether) is an effective solvent for adhesives and sealants. It has high solvency and dispersancy for many polar polymers, including one- and two-component polyurethanes and epoxies. | |
| TINUVIN® 479-DW | BASF Dispersions & Resins | Tinuvin® 479-DW is an aqueous triazine-based UV absorber dispersion for coatings, overprint varnishes, adhesives and sealants. It has an extremely high extinction coefficient, high long-term performance, high thermal stability, and is non-migrating. It wa...voir plus Tinuvin® 479-DW is an aqueous triazine-based UV absorber dispersion for coatings, overprint varnishes, adhesives and sealants. It has an extremely high extinction coefficient, high long-term performance, high thermal stability, and is non-migrating. It was designed to meet the highest performance and durability requirements, particularly in thin films or at reduced film thickness in water-based transportation and industrial applications including energy curable systems (UV, EB). Due to its extremely high extinction, Tinuvin® 479-DW is especially suitable for all water-based coatings applied at reduced film thickness or for thin film applications exposed to high baking temperatures and/or to extreme environmental conditions. voir moins | |
| TINUVIN® 622 SF | BASF Dispersions & Resins | Tinuvin® 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It offers superior thermal stability and good long term performance, as well as non-migrating and antioxidant ...voir plus Tinuvin® 622 SF is a solid oligomeric low basic hindered amine light stabilizer (HALS) developed for coating, adhesive and sealant applications. It offers superior thermal stability and good long term performance, as well as non-migrating and antioxidant properties. This product is designed to meet high performance and durability requirements of all powder coatings as well as adhesive and sealant applications. It protects coatings from surface defects such as gloss reduction, cracking and chalking, and ensures the retention of mechanical properties. In addition, it shows thermally stabilizing and antioxidant properties. voir moins | |
| TINUVIN® P | BASF Dispersions & Resins | Tinuvin® P is a UV absorber of the hydroxyphenyl-benzotriazole class that imparts good light stability to a wide variety of polymers and organic substrates. It provides UV protection in a wide variety of polymers including styrene homo- and copolymers, en...voir plus Tinuvin® P is a UV absorber of the hydroxyphenyl-benzotriazole class that imparts good light stability to a wide variety of polymers and organic substrates. It provides UV protection in a wide variety of polymers including styrene homo- and copolymers, engineering plastics such as polyesters and acrylic resins, polyvinyl chloride, and other halogen containing polymers and copolymers (e.g. vinylidenes), acetals and cellulose esters. Elastomers, adhesives, polycarbonate blends, polyurethanes, and epoxy materials also benefit from the use of Tinuvin® P. voir moins | |
| TMP (Hydro)® Trimethylol-propane | BASF SE, Intermediates Division | TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different typ...voir plus TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different types of alkyds and branched polyesters, it is easily esterified or transest. Alkyds and polyesters based on trimethylol-propane are suitable for solventborne paints (stoving enamels, two-component paints, can- & coil coating) and for waterborne paints. voir moins | |
| Triethylamine anhydrous | BASF SE, Intermediates Division | Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for ...voir plus Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for two-component paints. Triethylamine is suitable as neutralization agent in waterborne paints based on polyesters, alkyds, acrylic resins and polyurethanes containing carboxyl or other acidic groups. Due to excellent water solubility and lack of active hydrogen atoms, triethylamine is often used for the production of water-borne polyurethane dispersions. voir moins | |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF SE, Intermediates Division | Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based se...voir plus Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase. Triethylenglycol divinyl ether is used for UV-coatings (wood, printing inks) and UV adhesives. voir moins | |
| Triphenylphosphine | BASF SE, Intermediates Division | Triphenylphosphine is a catalyst for epoxy reactions. Triphenylphosphine is used in resin production, e.g. for epoxy modification used in CED-coatings. | |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...voir plus A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. voir moins |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
| High Shear Mixer | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| High Speed Disperser | Charles Ross & Son Company | Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...voir plus Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. voir moins |  |
| Multi-Shaft Mixer | Charles Ross & Son Company | We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...voir plus We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. voir moins |  |
| Planetary Dispersers | Charles Ross & Son Company | The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...voir plus The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. voir moins |  |
| Powder Induction | Charles Ross & Son Company | All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...voir plus All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. voir moins |  |
| PreMax | Charles Ross & Son Company | This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produ...voir plus This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produce an intense combination of mechanical, hydraulic and cavitational shear, which results in aggressive deagglomeration. voir moins |  |
| Ribbon Blender | Charles Ross & Son Company | Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity. |  |
| Sanitary Mixers | Charles Ross & Son Company | Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipm...voir plus Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipment can match. voir moins |  |
| Static/Motionless Mixers | Charles Ross & Son Company | Ross LPD/LLPD (low pressure drop) and ISG (interfacial surface generator) Motionless Mixers are well known for their wide ranging uses in turbulent and laminar flow mixing applications. |  |
| Systems And Controls | Charles Ross & Son Company | Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific n...voir plus Ross Systems and Controls (SysCon) is a leading worldwide supplier of control systems. We offer packages that range from simple on/off switches to sophisticated PLC based recipe systems. Each system, standard or custom, is designed to meet your specific needs. voir moins |  |
| Three Roll Mill | Charles Ross & Son Company | When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all other...voir plus When Ross produced the first Three Roll Mill more than 80 years ago, we revolutionized pigment dispersion — with superior consistency and finer dispersion than ever before. Today the original Ross Three Roll Mills are still the standard by which all others are measured — in applications as diverse as magnetic coatings, cosmetics, paints, inks and high performance ceramics. voir moins |  |
| Tumble Blenders | Charles Ross & Son Company | Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror ...voir plus Ross Tumble Blenders are supplied with generous standard features, including double cone design in 316 stainless steel construction, manually operated Butterfly valve for discharge - 24” discharge clearance Hinged stainless steel charging opening, mirror finish on interior surfaces, 150 grit finish on exterior surfaces, and the non-stainless steel components are finished with a durable two-component paint. voir moins |  |
| Vertical Blender | Charles Ross & Son Company | Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blendin...voir plus Ross Vertical Blenders provide an excellent design alternative for applications when your product is shear sensitive or your process parameters are critical Products that require low-impact blending are best handled in a Ross Vertical Blender. The blending action of the slow-turning blending screw is far more gentle than the agitators in a Ribbon Blender of the same working volume. voir moins |  |
