| Barifine® BF-26 | Kowa American Corporation | Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-40 | Kowa American Corporation | Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encap...voir plus Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| BASONAT® F 200 WD | BASF Dispersions & Resins | Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins | |
| BASONAT® LR 9056 | BASF Dispersions & Resins | Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins | |
| BellPearl® C2000 | Kowa American Corporation | BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low ...voir plus BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® C800 | Kowa American Corporation | BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low v...voir plus BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® R100 | Kowa American Corporation | BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R200 | Kowa American Corporation | BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R800 | Kowa American Corporation | BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® S190 | Kowa American Corporation | BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S290 | Kowa American Corporation | BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S830 | Kowa American Corporation | BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S870 | Kowa American Corporation | BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S890 | Kowa American Corporation | BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S895 | Kowa American Corporation | BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| Benzyl Acrylate (BZA, V-160) | Kowa American Corporation | Benzyl Acrylate (BZA, V-160) is a clear water white liquid. It is .044% insoluble in water. | Request Sample |
| Benzyl Methacrylate (BZMA) | Kowa American Corporation | Benzyl Methacrylate (BZMA) is a clear water white liquid. When shipped, it is packed in 200Kg (441lb) chemical drums. | Request Sample |
| BUTOFAN® NS 144 | BASF Dispersions & Resins | Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...voir plus Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 166 | BASF Dispersions & Resins | Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...voir plus Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. voir moins | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...voir plus Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. voir moins | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...voir plus CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...voir plus CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...voir plus CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. voir moins | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...voir plus CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
| CDH | Kowa American Corporation | CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus CDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
| Chemisnow® MR-1HG | Kowa American Corporation | Chemisnow® MR-1HG is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-2G | Kowa American Corporation | Chemisnow® MR-2G is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-5C | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-7GC | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-180 | Kowa American Corporation | Chemisnow® MX-180 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-2000 | Kowa American Corporation | Chemisnow® MX-2000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-300 | Kowa American Corporation | Chemisnow® MX-300 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-3000 | Kowa American Corporation | Chemisnow® MX-3000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-500 | Kowa American Corporation | Chemisnow® MX-500 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-80H3wT | Kowa American Corporation | Chemisnow® MX-80H3wT is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MZ-10HN | Kowa American Corporation | Chemisnow® MZ-10HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-12H | Kowa American Corporation | Chemisnow® MZ-12H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-16H | Kowa American Corporation | Chemisnow® MZ-16H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-20HN | Kowa American Corporation | Chemisnow® MZ-20HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-30H | Kowa American Corporation | Chemisnow® MZ-30H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® SGP-150C | Kowa American Corporation | Chemisnow® SGP-150C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Chemisnow® SGP-70C | Kowa American Corporation | Chemisnow® SGP-70C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Chemisnow® SX-130H | Kowa American Corporation | Chemisnow® SX-130H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-350H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-500H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Cyclohexyl Acrylate (CHA, V-155) | Kowa American Corporation | Cyclohexyl Acrylate (CHA, V-155) is a clear water white liquid. When shipped, it is packed in 180 Kg (397lb) steel drums. | Request Sample |
| Cyclohexyl Methacrylate (CHMA) | Kowa American Corporation | Cyclohexyl Methacrylate (CHMA) is a clear water white liquid. It is insoluble in water. | Request Sample |
| Dimethyl Acrylamide (DMAA) | Kowa American Corporation | Dimethyl Acrylamide (DMAA) is a clear, colorless liquid with slight odor. This product is completely soluble in water. | Request Sample |
| Dimethylamino Propyl Methacrylamide (DMAPMA) | Kowa American Corporation | Dimethylamino Propyl Methacrylamide (DMAPMA) is a light, yellow clear liquid. It is used in flocculants and water soluble polymers. | Request Sample |
| Dimethylaminoethyl Methacrylate (DMMA) | Kowa American Corporation | Dimethylaminoethyl Methacrylate (DMMA) is a Mitsubishi Rayon methacrylate functional monomer. | Request Sample |
| DPMP | Kowa American Corporation | DPMP is a polythiols in coating form for use in epoxy curing agents. Polythiols, when added in a curing agent, will contribute well to its adhesiveness. | Request Sample |
| DURANOL™ G3450J | Kowa American Corporation | DURANOL™ G3450J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts good abrasion resistance, lower crystallinity, and lower viscosity. This product is recommended for UV-cure coatings and adhesive applications. | Request Sample |
| DURANOL™ G3452 | Kowa American Corporation | DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyuret...voir plus DURANOL™ G3452 is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower crystallinity and good abrasion resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. voir moins | Request Sample |
| DURANOL™ G4672 | Kowa American Corporation | DURANOL™ G4672 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4671 | Kowa American Corporation | DURANOL™ T4671 is a polyalkylene carbonate diol. It offers a good balance of softness and chemical resistance. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4691 | Kowa American Corporation | DURANOL™ T4691 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
| DURANOL™ T4692 | Kowa American Corporation | DURANOL™ T4692 is a polyalkylene carbonate diol. It offers good abrasion resistance and hardness. This product is recommended for polyurethane dispersions, polyurethane resins for artificial leather, and polyurethane elastomers. | Request Sample |
| DURANOL™ T5650E | Kowa American Corporation | DURANOL™ T5650E is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and adhesives. | Request Sample |
| DURANOL™ T5650J | Kowa American Corporation | DURANOL™ T5650J is a polyalkylene carbonate diol. It is liquid at room temperature, and imparts lower viscosity and lower crystallinity. This product is recommended for UV-cure coatings and for adhesives agents. | Request Sample |
| Duranol™ T5651 Soft Polycarbonatediol (PCD) | Kowa American Corporation | Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a...voir plus Duranol™ T5651 is a soft polycarbonatediol (PCD) which exhibits excellent durability and good hydrolysis resistance. It also provides excellent scratch and weather resistance in a polyurethane formula. It is compatible with polyester polyols and offers a softer feel as a binder in soft feel coatings. Duranol™ T5651 is easy to handle and exhibits good solvent solubility. It is amorphous and possesses stress at a low strain smaller than that of solid type PCD. Duranol™ T5651 is designed for various coating and other similar applications. voir moins | Request Sample |
| DURANOL™ T5652 | Kowa American Corporation | DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyureth...voir plus DURANOL™ T5652 is a polyalkylene carbonate diol. It is a colorless or pale yellow clear liquid at room temperature, and it imparts good softness and lower crystallinity. This product is recommended for polyurethane resins for artificial leather, polyurethane dispersions, polyurethane elastomers, and for plastic coating agents. voir moins | Request Sample |
| DURANOL™ T6001 | Kowa American Corporation | DURANOL™ T6001 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane elastomers and dispersions. | Request Sample |
| DURANOL™ T6002 | Kowa American Corporation | DURANOL™ T6002 is a polyalkylene carbonate diol. It imparts weather resistance and hydrolysis resistance. This product is recommended for polyurethane resins for artificial leather and polyurethane dispersions. | Request Sample |
| Ethylene Glycol Dimethacrylate (EDMA) | Kowa American Corporation | Ethylene Glycol Dimethacrylate (EDMA) is a clear water white liquid. It is 0.18% soluble in water and 0.70% in water in EDMA. | Request Sample |
| GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...voir plus GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
| GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...voir plus GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
| GABEPRO® GPM-800LO | Gabriel Performance Products | GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and...voir plus GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. GPM-800LO is formulated to have an improved odor relative to our standard product. voir moins | |
| GABEPRO® GPM-888 | Gabriel Performance Products | GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...voir plus GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. voir moins | |
| GABEPRO® GPM-891 | Gabriel Performance Products | GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinnin...voir plus GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinning problems. GABEPRO® GPM-891 is designed to provide a gel time of 5 minutes when formulated with a standard bis-phenol A epoxy resin. voir moins | |
| Glycidyl Methacrylate (GMA) | Kowa American Corporation | Glycidyl Methacrylate (GMA) is a clear water white liquid. It has a 2.53 cps viscosity at 28°C. | Request Sample |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| Hydroxypropyl Acrylate (HPA) | Kowa American Corporation | Hydroxypropyl Acrylate (HPA) is a clear, water white liquid. | Request Sample |
| IDH | Kowa American Corporation | IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus IDH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
| IRGASTAB® UV 22 | BASF Dispersions & Resins | Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulatio...voir plus Irgastab® UV 22 is an in-can stabilizer that inhibits early polymerization in UV curable ink and coating formulations. In addition, it helps to preserve shelf life stability. This product is recommended for printing ink formulations and coating formulations. voir moins | |
| Isobornyl Acrylate (IBXA) | Kowa American Corporation | Isobornyl Acrylate (IBXA) is a clear water white liquid. It has a 7.6 cps viscosity at 28°C. | Request Sample |
| Isobornyl Methacrylate (IBXMA) | Kowa American Corporation | Isobornyl Methacrylate (IBXMA) is a clear water white liquid. It is insoluble in water. | Request Sample |
| Isobutyl Acrylate (IBA) | Kowa American Corporation | Iso-Butyl Acrylate (IBA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing IBA have improved hardness, chemical resistance, water resistance, hydrophobicity, an...voir plus Iso-Butyl Acrylate (IBA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing IBA have improved hardness, chemical resistance, water resistance, hydrophobicity, and weatherability. voir moins | Request Sample |
| JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| JONCRYL® U 4501 | BASF Dispersions & Resins | JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Ad...voir plus JONCRYL® U 4501 is a self-crosslinking, aliphatic polyurethane dispersion designed for use in wood topcoats. The dispersion is characterized by its final hardness and exceptional scratch resistance. The dispersion is free of both triethylamine and NMP. Additionally, the low minimum film forming temperature and low solvent demand allows formulators to achieve low VOC coatings. With its broad acrylic dispersion compatibility, JONCRYL U 4501 can be easily blended with WB acrylic resins such as JONCRYL 9530-A to achieve higher levels of scratch, mar, and abrasion resistance, without many of the potential drawbacks of PUD blends. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LOW ODOR PEMP Pentaerythritol Tetrakis (3-mercaptopropionate) | Kowa American Corporation | LOW ODOR PEMP is a tetra functional polythiol. The reducing properties of its SH-group can be useful as a chain transfer agent, cross-linking agent, epoxy curing agent, & for improved adhesion & flexibility in coatings, adhesives and sealants. | Request Sample |
| LUPHEN® D 207 E | BASF Dispersions & Resins | Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack...voir plus Luphen® D 207 E is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The film that Luphen® D 207 E yields can be activated by heat and in common with the PUR elastomer films, it has a limited hot-tack life. voir moins | |
| LUPHEN® D 259 U | BASF Dispersions & Resins | Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition...voir plus Luphen® D 259 U is an aqueous dispersion of a polyether polyurethane elastomer for the manufacture of laminating adhesives. The dispersion adheres well to the types of plastic used for this purpose as well as to metallised films and aluminum. The addition of a few percent of a water dispersible polyisocyanate to Luphen® D 259 U increases its resistance to heat and moisture. The potlife of the adhesive depends on the reactivity of the polyisocyanate used, and this has to be determined in trials. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| Methacrylamido Propyl Trimethyl Ammonium Chloride (MAPTAC) | Kowa American Corporation | Methacrylamido Propyl Trimethyl Ammonium Chloride (MAPTAC) is a liquid. | Request Sample |
| Methacryloyl Chloride | Kowa American Corporation | Methacryloyl Chloride is a clear liquid. | Request Sample |
| N-12 | Kowa American Corporation | N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agen...voir plus N-12 is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins |
