| 1,9-Nonanediol Diacrylate (V-260) | Kowa American Corporation | 1,9-Nonanediol Diacrylate (V-260) is a clear to light yellow liquid. It freezes below 0°C and has a boiling point above 250°C. | Request Sample |
| 2-Dimethylaminoethyl Methacrylate (DMMA-D) | Kowa American Corporation | 2-Dimethylaminoethyl Methacrylate (DMMA-D) is a clear liquid. | Request Sample |
| 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) | Kowa American Corporation | 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) is a clear water white liquid. It has mehq and phenothiazine (PTZ) as inhibitors. | Request Sample |
| 2-Ethoxyethyl Methacrylate (ETMA) | Kowa American Corporation | 2-Ethoxyethyl Methacrylate (ETMA) is a clear water white liquid. It has the viscosity range of 2 - 6 cps at 25°C. | Request Sample |
| 2-HEMA-Phosphate | Kowa American Corporation | 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Pho...voir plus 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Phosphate can be used in pigment systems to promote adhesion. voir moins | Request Sample |
| 2-Hydroxyethyl Acrylate (HEA) | Kowa American Corporation | 2-Hydroxyethyl Acrylate (HEA) is a clear water white liquid. It has a boiling point 82°C and a freezing point of below -70°C. | Request Sample |
| 2-Hydroxyethyl Methacrylate (HEMA) | Kowa American Corporation | 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provide...voir plus 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provides scratch, solvent & weather resistance, control of hydrophobicity &/or can introduce reactive sites. voir moins | Request Sample |
| 2-Hydroxyethyl Methacrylate (HISS) | Kowa American Corporation | 2-Hydroxyethyl Methacrylate (HISS) is 0.1% water and has 10 APHA of color when shipped. | Request Sample |
| 2-Hydroxypropyl Methacrylate (HPMA) | Kowa American Corporation | HPMA is a hydroxy functional monomer used to make acrylic polyols and other hydrophilic polymers. | Request Sample |
| 2-Methoxyethyl Acrylate (MTA) | Kowa American Corporation | 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, ...voir plus 2-Methoxyethyl Acrylate (MTA) is a specialty monomer for the synthesis of specific polymers in the coatings, paint, adhesive and plastic market segments. Polymers containing MTA have improved bendability, flexibility at lower temperatures, UV resistance, water resistance and adhesion. When used as an additive, it improves oil resistance dues to its polarity. voir moins | Request Sample |
| 2-Methoxyethyl Methacrylate (MTMA) | Kowa American Corporation | 2-Methoxyethyl Methacrylate (MTMA) is 0.1% water and has 20 APHA of color when shipped. | Request Sample |
| 4-Hydroxybutyl Acrylate (4HBA) | Kowa American Corporation | 4-HBA is a clear water white liquid. It is used for automotive painting. It helps protect against hardness and anit-rust, as well as offers good color, flatness, smoothness, brightness, and gloss. | Request Sample |
| ACRESIN® A 204 UV | BASF Dispersions & Resins | acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, w...voir plus acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, which require coat weights up to 80 g/m2 (3 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 250 UV | BASF Dispersions & Resins | acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® A 260 UV | BASF Dispersions & Resins | acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...voir plus acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. voir moins | |
| ACRESIN® UV 3532 | BASF Dispersions & Resins | acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weight...voir plus acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights up to ~40 g/m2 (1.5 mils). By virtue of its low glass transition temperature, it may also be used as a freezer grade adhesive in various applications. voir moins | |
| ACRONAL® 3630 | BASF Dispersions & Resins | Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, t...voir plus Acronal® 3630 exhibits excellent drying behavior as compared to conventional water based systems, allowing the production of articles with high coating weights. It exhibits excellent adhesion to low surface energy substrates combined with balanced peel, tack and cohesion, as well as excellent water resistance. Product has also been found to be suitable for numerous demanding roll label type applications. voir moins | |
| ACRONAL® 3633 | BASF Dispersions & Resins | Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non...voir plus Acronal® 3633 is a high performance acrylic for demanding adhesive applications. It provides heat resistance, high SAFT, high tack/peel and moisture resistance. This product also offers adhesion to low energy substrates and exhibits fast drying. It is non-APEO. voir moins | |
| ACRONAL® 3636 X | BASF Dispersions & Resins | Acronal® 3636 X is an APEO-free, aqueous adhesive dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® 4 D | BASF Dispersions & Resins | Acronal® 4 D is a dispersion of a polyacrylic acid butyl ester in water used to manufacture pressure-sensitive adhesives for self-adhesives articles. | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® 4034 | BASF Dispersions & Resins | Acronal® 4034 is a non-APEO containing acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesives labels and tapes. | |
| ACRONAL® 4053 X | BASF Dispersions & Resins | Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending. | |
| ACRONAL® 4510 | BASF Dispersions & Resins | Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also di...voir plus Acronal® 4510 is a flexible, all-acrylic polymer recommended for high performance elastomeric coatings. Acronal® 4510 demonstrates excellent low temperature flexibility and provides very good adhesion to masonry and metal substrates. Acronal® 4510 also displays high water vapor permeability and low water absorption, which provides excellent long-term performance. The self-crosslinking mechanism of Acronal® 4510 imparts excellent dirt pick-up resistance and film strength while maintaining film elasticity at very low temperatures and varying film thicknesses. voir moins | |
| ACRONAL® A 110 | BASF Dispersions & Resins | Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...voir plus Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. voir moins | |
| ACRONAL® A 145 | BASF Dispersions & Resins | Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...voir plus Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® A 240 NA | BASF Dispersions & Resins | Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...voir plus Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® A 245 | BASF Dispersions & Resins | Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...voir plus Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. voir moins | |
| ACRONAL® DS 3502 | BASF Dispersions & Resins | Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...voir plus Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. voir moins | |
| ACRONAL® DS 3570 NA | BASF Dispersions & Resins | Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...voir plus Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. voir moins | |
| ACRONAL® DS 3598 NA | BASF Dispersions & Resins | Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...voir plus Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. voir moins | |
| ACRONAL® LA 449 S | BASF Dispersions & Resins | Acronal® LA 449 S is an aqueous polymer dispersion for the manufacture of pressure sensitive adhesives for self-adhesive articles. | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...voir plus Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...voir plus Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. voir moins | |
| ACRONAL® NX 2278 X | BASF Dispersions & Resins | Acronal® NX 2278 is an APEO-free, self-cross linking, aqueous adhesive dispersion used for the manufacture of pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® NX 4021 | BASF Dispersions & Resins | Acronal® NX 4021 is a water-based high-tack dispersion ideal for packaging tape and self-wound overlaminate. It offers good adhesion to cardboard and low surface energy substrates, high shear, excellent light stability, and good thermal stability. | |
| ACRONAL® NX 4569 | BASF Dispersions & Resins | Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...voir plus Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. voir moins | |
| ACRONAL® NX 5818 | BASF Dispersions & Resins | Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...voir plus Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). voir moins | |
| ACRONAL® S 504 NA | BASF Dispersions & Resins | Acronal® S 504 na is a versatile dispersion used as the base polymer for paper strengthening via saturation, and also finds utility as a binder in sound damping and adhesives applications. | |
| ACRONAL® V 210 NA | BASF Dispersions & Resins | Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia. | |
| ACRONAL® V 275 NA | BASF Dispersions & Resins | Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free. | |
| Acrylamide Solid | Kowa American Corporation | Acrylamide Solid is a white crystal powder. | Request Sample |
| Acrylol Chloride | Kowa American Corporation | Acrylol Chloride is a clear liquid. | Request Sample |
| ACTFLOW 1-A | Kowa American Corporation | ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal t...voir plus ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW CB-3060 | Kowa American Corporation | ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excell...voir plus ACTFLOW CB-3060 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3060 has an approximate molecular weight of 3000, and a viscosity of 800 to 1200. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW CB-3098 | Kowa American Corporation | ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...voir plus ACTFLOW CB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 20000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW CBB-3098 | Kowa American Corporation | ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and e...voir plus ACTFLOW CBB-3098 is apart of a liquid type acrylic polymer grade range. ACTFLOW CBB-3098 has an approximate molecular weight of 3000, and a viscosity of 10000 to 25000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW NE-1000 | Kowa American Corporation | ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW NE-3000 | Kowa American Corporation | ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW NE-3000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-3000 has an approximate molecular weight of 5000, and a viscosity of 1500 to 2500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ACTFLOW UMM-1001 | Kowa American Corporation | ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...voir plus ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as a plasticizer replacements, modifying agents and additive agents. voir moins | Request Sample |
| ACTFLOW UT-1001 | Kowa American Corporation | ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...voir plus ACTFLOW UT-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UT-1001 has an approximate molecular weight of 3500, and a viscosity of 2000 to 4000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. voir moins | Request Sample |
| ADH | Kowa American Corporation | ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent...voir plus ADH is a white crystal powder, carboxylic acid dihyrazide that contains two active hydrazide groups. This product is used mainly in the powder coatings field for latent curing agent for one component epoxy resin. It also functions as a cross linking agent for carbonyl containing emulsion in paint, adhesive, coating field for one liquid water emulsion. It is also a chain extender for Urethane resin and is also used as a reforming agent for synthetic resins and synthetic fibers. voir moins | Request Sample |
| Allyl Methacrylate (AMA) | Kowa American Corporation | Allyl Methacrylate (AMA) is a clear water liquid. this product is packed in 180Kg (397lb) steel drums or bulk ISO tanks. | Request Sample |
| Alpha Methyl Styrene Dimer (AMSD) | Kowa American Corporation | Alpha Methyl Styrene Dimer(AMSD) is a colorless liquid. | Request Sample |
| β-Mercapto Propionic Acid (BMPA) | Kowa American Corporation | β-Mercapto Propionic Acid (BMPA) is a clear liquid with no particulate matter. | Request Sample |
| Barifine® BF-1 | Kowa American Corporation | Barifine® BF-1 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsu...voir plus Barifine® BF-1 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| Barifine® BF-10 | Kowa American Corporation | Barifine® BF-10 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encaps...voir plus Barifine® BF-10 is a highly transparent, chemically inert ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| Barifine® BF-20 | Kowa American Corporation | Barifine® BF-20 (Barium sulfate) is a chemically stable substance with high heat, chemical & water resistance and increased weatherability. It is classified as a precipitated barium sulfate or a synthetic product and a ground barite obtained by pulverizi...voir plus Barifine® BF-20 (Barium sulfate) is a chemically stable substance with high heat, chemical & water resistance and increased weatherability. It is classified as a precipitated barium sulfate or a synthetic product and a ground barite obtained by pulverizing natural ores. It is used as a general extender pigment because of its relatively high specific gravity and low refractive index. voir moins | Request Sample |
| Barifine® BF-21 | Kowa American Corporation | Barifine® BF-21 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-21 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-25 | Kowa American Corporation | Barifine® BF-25 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-25 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-26 | Kowa American Corporation | Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of o...voir plus Barifine® BF-26 is an excellent dispersion with superior transparency in water-born coatings due to surface treatment. This product shows improvement in the haze-free gloss and jetness of black paints; as well as in the haze-free gloss and saturation of organic color pigments. Some recommended uses of this product include automotive topcoat and automotive surfacer by water-born coatings. It is also used in water-born coatings and water-born inks. voir moins | Request Sample |
| Barifine® BF-40 | Kowa American Corporation | Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encap...voir plus Barifine® BF-40 is a highly transparent, chemically inert, ultrafine barium sulfate that is a part of KOWA's Barifine® Series. This product provides haze-free gloss and highly smooth film by its hyper filling effect for solvent-born paint. Barifine® encapsulated pigment particles maximize their original brightness. Some recommended uses of this product are automotive topcoat, automotive surfacer, appliance coatings, inks, and plastics. voir moins | Request Sample |
| BASONAT® F 200 WD | BASF Dispersions & Resins | Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixtu...voir plus Basonat® F 200 WD is an easily dispersible, low viscosity cross linking component for acrylic and PUR dispersions. It can be stirred directly into the dispersion to be cross linked with a suitable stirrer. Care must be taken to achieve a homogeneous mixture. In general, 2 – 5 parts of Basonat® F 200 WD should be added to 100 parts of dispersion. The pot life depends very much on its pH and composition, and must therefore be determined in tests along with the bond strength and creep resistance by the manufacturer. voir moins | |
| BASONAT® LR 9056 | BASF Dispersions & Resins | Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applicati...voir plus Basonat® LR 9056 is a water-emulsifiable, solvent-free, aliphatic polyisocyanate for crosslinking hydroxyl functional emulsions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. This product is recommended for applications such as interior/exterior industrial metal coatings, plastic components coatings, wood coatings for floor, furniture, or millwork applications, and automotive OEM and refinish applications. voir moins | |
| BellPearl® C2000 | Kowa American Corporation | BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low ...voir plus BellPearl® C2000 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® C800 | Kowa American Corporation | BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low v...voir plus BellPearl® C800 is a non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's C-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It has high stowing and low viscosity at mixing in matrix resin. This product is a carbon filler for thermoplastics, thermosettings, and rubber to improve electro-conductivity, or frictional properties; stocks for activated carbon and electrode. voir moins | Request Sample |
| BellPearl® R100 | Kowa American Corporation | BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R100 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R200 | Kowa American Corporation | BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R200 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® R800 | Kowa American Corporation | BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® R800 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's R-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is insoluble in any solvent. This product is a resin filler for thermoplastics, thermosettings, and rubber to improve mechanical properties, thermal resistance, or frictional properties. voir moins | Request Sample |
| BellPearl® S190 | Kowa American Corporation | BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S190 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S290 | Kowa American Corporation | BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S290 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S830 | Kowa American Corporation | BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S830 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S870 | Kowa American Corporation | BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S870 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S890 | Kowa American Corporation | BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S890 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| BellPearl® S895 | Kowa American Corporation | BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well wit...voir plus BellPearl® S895 is an odorless, non-toxic, high performance phenolic resin with perfectly spherical shape. It is part of KOWA's S-type; Micro-sphere series which is characterized with high molecular weight and low cross-linking density. It blends well with other powder materials and is water soluble. This product is a binder resin in heat-proofs, abrasives, friction, refractories, and carbon source. voir moins | Request Sample |
| Benzyl Acrylate (BZA, V-160) | Kowa American Corporation | Benzyl Acrylate (BZA, V-160) is a clear water white liquid. It is .044% insoluble in water. | Request Sample |
| Benzyl Methacrylate (BZMA) | Kowa American Corporation | Benzyl Methacrylate (BZMA) is a clear water white liquid. When shipped, it is packed in 200Kg (441lb) chemical drums. | Request Sample |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect o...voir plus Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol. voir moins | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...voir plus Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. voir moins | |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...voir plus Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. voir moins | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...voir plus Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. voir moins | |
| Bisomer® CHMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resi...voir plus Bisomer® CHMA is a hydrophobic methacrylate monomer. It is a mono-functional methacrylate, making it ideal for acrylic polymer synthesis. Bisomer® CHMA can be used to improve the hydrophobicity, weathering, physical and chemical resistance of acrylic resins. This product is also a useful reactive diluent in 2K adhesives and coatings. voir moins | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...voir plus Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. voir moins | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...voir plus Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...voir plus Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...voir plus Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. voir moins | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...voir plus Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. voir moins | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...voir plus Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. voir moins | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...voir plus Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. voir moins | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...voir plus Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...voir plus Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. voir moins | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...voir plus Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). voir moins | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...voir plus Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. voir moins | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...voir plus Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. voir moins | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...voir plus Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). voir moins | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...voir plus Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. voir moins | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...voir plus Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. voir moins |
