| BurnEx™ 30-107 | Nyacol Nano Technology | BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...voir plus BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ A1582 | Nyacol Nano Technology | BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester. | |
| BurnEx™ ADP480 | Nyacol Nano Technology | BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives | |
| BurnEx™ ADP494 | Nyacol Nano Technology | BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones. | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...voir plus BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...voir plus BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...voir plus BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. voir moins | |
| Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...voir plus Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...voir plus Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. voir moins | |
| Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...voir plus Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. voir moins | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...voir plus Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. voir moins | |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...voir plus Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. voir moins | |
| Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...voir plus Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. voir moins | |
| Crestomer® 1196PA | Scott Bader | Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured ...voir plus Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured or cured FRP skins. It also displays a tougher and more durable structural bond than a polyester bonding adhesive or a polyester resin/glass structure. Crestomer® 1196PA also exhibits reduced styrene emissions, great weight savings and more improved cosmetics with the ridding of core print through. Crestomer® 1196PA is suited for use in sandwich construction where the needs are for a high impact-resistant, strong and tough structure. voir moins | |
| Crestomer® Advantage 30 | Scott Bader | Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in...voir plus Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in 2 hours and 20 minutes. It is based on unique urethane acrylate technology and displays good impact strength and toughness. With the strong adhesion and gap filling qualities shown by Crestomer® Advantage 30, great flexibility in design is offered, along with time and cost savings. voir moins | |
| Crystic® BP 621CC 30 | Scott Bader | Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 45 | Scott Bader | Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 65 | Scott Bader | Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC White 20 | Scott Bader | Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical f...voir plus Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-78PA | Scott Bader | Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assemb...voir plus Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-79PA | Scott Bader | Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembl...voir plus Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-80PA | Scott Bader | Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanic...voir plus Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP moldings - including internal frames, inserts, ribs, panels, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-82PA | Scott Bader | Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specificall...voir plus Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specifically designed for the assembly and bonding of GRP moldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-83PA | Scott Bader | Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically design...voir plus Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically designed for the assembly and bonding of GRP moldings, including internal frames, inserts, ribs, panels, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-83PAHV | Scott Bader | Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically...voir plus Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-84PA | Scott Bader | Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effec...voir plus Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effective catalyst mix. This product is designed for non-structural applications where gap filling may be a secondary requirement. voir moins | |
| Crystic® BP 91-21PA | Scott Bader | Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifica...voir plus Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, hull-to-deck assemblies, composite constructions, and car body components. voir moins | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...voir plus Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. voir moins | |
| Crystic® Scottbond 117PA | Scott Bader | Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that a...voir plus Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that are standard in the GRP industry. Crystic® Scottbond 117PA shows good adhesion to GRP laminates, offering a stronger bond compared to resin and glass fiber in the laminate. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...voir plus EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. voir moins | Request Sample |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...voir plus EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). voir moins | Request Sample |
| EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...voir plus EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). voir moins | Request Sample |
| EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...voir plus EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...voir plus EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...voir plus EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and voir moins | Request Sample |
| EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...voir plus EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. voir moins | Request Sample |
| EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...voir plus EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. voir moins | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...voir plus EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. voir moins | Request Sample |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...voir plus EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. voir moins | Request Sample |
| EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...voir plus EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...voir plus EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...voir plus EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. voir moins | Request Sample |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...voir plus EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. voir moins | Request Sample |
| EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
| EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...voir plus EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. voir moins | Request Sample |
| EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...voir plus EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. voir moins | Request Sample |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...voir plus EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. voir moins | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...voir plus EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. voir moins | Request Sample |
| Griltex® 11A | EMS-CHEMIE AG (PRIMID) | Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a...voir plus Griltex® 11A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 1A | EMS-CHEMIE AG (PRIMID) | Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...voir plus Griltex® 1A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 2A | EMS-CHEMIE AG (PRIMID) | Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle size...voir plus Griltex® 2A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 2A S | EMS-CHEMIE AG (PRIMID) | Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination ...voir plus Griltex® 2A S is a copolyamide suspension thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is milky white in appearance, and has a lamination temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 6E | EMS-CHEMIE AG (PRIMID) | Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 6E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 8E | EMS-CHEMIE AG (PRIMID) | Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 8E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 130-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® 9E | EMS-CHEMIE AG (PRIMID) | Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a ...voir plus Griltex® 9E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has a laminating temperature of 120-150°C. This product is well used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 20 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 20 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 21 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 21 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 160-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CE 22 | EMS-CHEMIE AG (PRIMID) | Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle s...voir plus Griltex® CE 22 is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 100 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle ...voir plus Griltex® CT 100 is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 101 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® CT 101 is a polyamide 12 thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® CT 102 | EMS-CHEMIE AG (PRIMID) | Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various parti...voir plus Griltex® CT 102 is a polyphenylamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes or as suspension. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1260A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It h...voir plus Griltex® D 1260A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in powder form in various particle sizes. It has good steam and dry cleaning resistance. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1299A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various pa...voir plus Griltex® D 1299A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, non-wovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1309E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1309E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1377E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1377E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 170-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1442E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1442E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 190-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1500A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1500A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 150-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1519E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1519E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1523A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1523A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1539E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1539E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 140-170°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1541A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1541A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1549A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1549A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 180-200°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1556A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1556A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1566A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1566A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1582E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1582E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1595E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1595E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1616E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1616E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1619E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1619E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-250°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1655E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1655E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1662A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1662A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1666A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various par...voir plus Griltex® D 1666A is a heat stabilized copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 140-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1682E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1682E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 180-220°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1694A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1694A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 170-190°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1709A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1709A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 160-180°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1796A | EMS-CHEMIE AG (PRIMID) | Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1796A is a copolyamide thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 200-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1841E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 1841E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a hotmelt application temperature of 210-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 1939E | EMS-CHEMIE AG (PRIMID) | Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 1939E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 190-230°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2132E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle...voir plus Griltex® D 2132E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule and powder form in various particle sizes. It has a lamination temperature of 110-140°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2275E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to ble...voir plus Griltex® D 2275E is a flame retardant copolyester-MB thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It has a FR additive and can be used to blend with other copolyesters to provide flame retardant properties. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2315E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2315E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 170-210°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2338E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2338E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 210-240°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins | |
| Griltex® D 2427E | EMS-CHEMIE AG (PRIMID) | Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It ...voir plus Griltex® D 2427E is a copolyester thermoplastic, solvent-free adhesive formulated for the coating and laminating of technical textiles, nonwovens, apparel materials and non-textile substrates. It is available in granule form in various particle sizes. It has a hotmelt application temperature of 120-160°C. This product is used in the fields of transportation, construction, electronics, fusible webs and films, medical diagnostics, packaging, composites, and clothing. voir moins |
