| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...voir plus 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). voir moins | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...voir plus 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. voir moins | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...voir plus 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. voir moins | |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4702-X-50 Chain Stopped Alkyd Resin | Gabriel Performance Products | 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...voir plus 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. voir moins | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...voir plus 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. voir moins | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...voir plus 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. voir moins | |
| 4892-SD-50 Epoxy Ester | Gabriel Performance Products | 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...voir plus 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. voir moins | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...voir plus 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. voir moins | |
| 4965-XMP-80 High Solids Silicone Modified Short Oil | Gabriel Performance Products | 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellen...voir plus 4965-XMP-80 High Solids Silicone Modified Short Oil is an air dry silicone modified alkyd resin intended for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. This product offers excellent adhesion to most metal surfaces. voir moins | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...voir plus 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. voir moins | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...voir plus 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. voir moins | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...voir plus 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. voir moins | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...voir plus 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. voir moins | |
| 5075-BS-85 Water Reducible Saturated Polyester Resin | Gabriel Performance Products | 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes. | |
| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...voir plus 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. voir moins | |
| A-6165 | Designer Molecules | A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications. | |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...voir plus A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. voir moins | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...voir plus Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...voir plus Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...voir plus Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...voir plus Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...voir plus Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...voir plus Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® L-50E | UNITED INITIATORS GMBH & CO KG | Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...voir plus Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. voir moins | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-3000 | Designer Molecules | BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and...voir plus BMI-3000 is a light yellow powder form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-3000 GEL | Designer Molecules | BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, a...voir plus BMI-3000 GEL is a red amber gel form bismaleimide oligomer. This product exhibits excellent flexibility and forms very tough, hydrophobic polyimides. BMI-3000 GEL is most commonly used in adhesives as an additive to increase flexibility, hydrophobicity, and thixotropy. voir moins | |
| BMI-5000 | Designer Molecules | BMI-5000 is a light yellow powder form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 is a most commonly used in base resin applications. | |
| BMI-5000 50% Toluene | Designer Molecules | BMI-5000 50% Toluene is a dark brown liquid form bismaleimide oligomer. This product can be processed in a resin system as a solid or dissolved in a solvent. BMI-5000 50% Toluene is a most commonly used in base resin applications. | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...voir plus CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
| CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...voir plus CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
| CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...voir plus CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. voir moins | |
| CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...voir plus CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
| Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...voir plus Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...voir plus Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. voir moins | |
| Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...voir plus Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. voir moins | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...voir plus Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. voir moins | |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...voir plus Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. voir moins | |
| Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...voir plus Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. voir moins | |
| Crestomer® 1196PA | Scott Bader | Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured ...voir plus Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured or cured FRP skins. It also displays a tougher and more durable structural bond than a polyester bonding adhesive or a polyester resin/glass structure. Crestomer® 1196PA also exhibits reduced styrene emissions, great weight savings and more improved cosmetics with the ridding of core print through. Crestomer® 1196PA is suited for use in sandwich construction where the needs are for a high impact-resistant, strong and tough structure. voir moins | |
| Crestomer® Advantage 30 | Scott Bader | Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in...voir plus Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in 2 hours and 20 minutes. It is based on unique urethane acrylate technology and displays good impact strength and toughness. With the strong adhesion and gap filling qualities shown by Crestomer® Advantage 30, great flexibility in design is offered, along with time and cost savings. voir moins | |
| Crystic® BP 621CC 30 | Scott Bader | Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 45 | Scott Bader | Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 65 | Scott Bader | Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC White 20 | Scott Bader | Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical f...voir plus Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-78PA | Scott Bader | Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assemb...voir plus Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-79PA | Scott Bader | Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembl...voir plus Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-80PA | Scott Bader | Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanic...voir plus Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP moldings - including internal frames, inserts, ribs, panels, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-82PA | Scott Bader | Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specificall...voir plus Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specifically designed for the assembly and bonding of GRP moldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-83PA | Scott Bader | Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically design...voir plus Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically designed for the assembly and bonding of GRP moldings, including internal frames, inserts, ribs, panels, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-83PAHV | Scott Bader | Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically...voir plus Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-84PA | Scott Bader | Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effec...voir plus Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effective catalyst mix. This product is designed for non-structural applications where gap filling may be a secondary requirement. voir moins | |
| Crystic® BP 91-21PA | Scott Bader | Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifica...voir plus Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, hull-to-deck assemblies, composite constructions, and car body components. voir moins | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...voir plus Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. voir moins | |
| Crystic® Scottbond 117PA | Scott Bader | Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that a...voir plus Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that are standard in the GRP industry. Crystic® Scottbond 117PA shows good adhesion to GRP laminates, offering a stronger bond compared to resin and glass fiber in the laminate. voir moins | |
| CS-697 | Designer Molecules | CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly ...voir plus CS-697 is a colorless liquid polyglycidyl ether cyclosiloxane monomer. This product features multifunctional, low viscosity, low epoxy equivalent weight, colorless, thermal stability, non-yellowing (UV exposure), and low chloride. CS-697 is most commonly used to formulate adhesives in organic resins applications. This resin is very compatible with most organic resins. voir moins | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EC-1074 | Designer Molecules | EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition...voir plus EC-1074 is an amber glassy solid tetra-phenol epoxy. This product highlights low modulus, hydrophobic, thermal stability, hydrolytically resistant thermosets. EC-1074 is most commonly used as an epoxy curative in film and pre-applied adhesive composition applications. voir moins | |
| EC-234 | Designer Molecules | EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive o...voir plus EC-234 is a light yellow, liquid phenyl ester epoxy curative hybrid. This product has the ability to cure with both epoxy resin through the phenyl ester or in a free radical resin system through the acrylate. EC-234 is most commonly used as an adhesive or coating in a multitude of applications. voir moins | |
| EC-298 | Designer Molecules | EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an e...voir plus EC-298 is a clear light yellow, liquid difunctional phenyl ester epoxy. This product does not interfere with free-radical cure and is therefore well suited for use in epoxy/(meth)acrylate hybrid thermoset compositions. EC-298 is most commonly used as an epoxy curative in applications where toughness is required. voir moins | |
| EC-326 | Designer Molecules | EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydroly...voir plus EC-326 is a white to light yellow solid acetate/proprionate epoxy. This product has low melting curative properties, is soluble in most epoxy monomers, and low moisture uptake. EC-326 is most commonly used to improve toughness, hydrophobicity, and hydrolytic stability in adhesive applications. voir moins | |
| EC-392 | Designer Molecules | EC-392 is an amber liquid phenyl ester epoxy. This product highlights dual cure mechanism, high cross-link density, and thermal stability. EC-392 is most commonly used in liquid adhesives and paste applications. | |
| EC-861 | Designer Molecules | EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibil...voir plus EC-861 is a yellow liquid phenyl acetate epoxy curative. This product highlights low modulus, hydrophobic, thermal stability, and hydrolytically resistant thermosets. EC-861 is most commonly used in applications where high levels of toughness and flexibility are needed. voir moins | |
| ECAT-243 | Designer Molecules | ECAT-243 is a yellow microcrystalline solid imidazole epoxy catalyst. This product features good solubility in most epoxy monomers and excellent latency characteristics. ECAT-243 is most commonly used in epoxy homocure and epoxy curative applications. | |
| ECAT-259 | Designer Molecules | ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy c...voir plus ECAT-259 is a yellow powder imidazole epoxy. This product features good solubility in most epoxy monomers, excellent latency characteristics, can be used as a catalyst or curative, and tunable cures. ECAT-259 is most commonly used in catalyst and epoxy curative, applications. voir moins |
