| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...voir plus Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. voir moins | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...voir plus Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. voir moins | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...voir plus Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. voir moins | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...voir plus Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...voir plus Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...voir plus Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...voir plus Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...voir plus Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...voir plus Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® L-50E | UNITED INITIATORS GMBH & CO KG | Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...voir plus Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. voir moins | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...voir plus IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. voir moins | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...voir plus IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. voir moins | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...voir plus Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. voir moins | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| SONGLIGHT® 1230 | Songwon International AG | SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and u...voir plus SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyesters. Can be used in automotive and industrial coating, decorative paint and wood stains or varnishes. voir moins | |
| SONGNOX® 1010 | Songwon International AG | SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effe...voir plus SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effect in combination with SONGNOX® 1680 and other secondary antioxidants. It can also be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use voir moins | |
| SONGNOX® 1024 | Songwon International AG | SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (...voir plus SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (particularly SONGNOX® 1010) to achieve synergistic performance. voir moins | |
| SONGNOX® 1035 | Songwon International AG | SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility ...voir plus SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility and provides long-term heat stability. voir moins | |
| SONGNOX® 1076 | Songwon International AG | SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used wi...voir plus SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. voir moins | |
| SONGNOX® 1098 | Songwon International AG | SONGNOX® 1098 is hghly effective especially in wire and cable applications used as primary insulation of PP, HDPE, LDPE and other elastomers. Is an antioxidant for Polyamide fibers, molded articles and films. Provides extraction resistance. | |
| SONGNOX® 117B | Songwon International AG | SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term h...voir plus SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term heat stability - protects physical properties during storage and in the end use application. It is also useful for stabilization of Polycarbonates, ABS, and Polyesters. voir moins | |
| SONGNOX® 11B | Songwon International AG | SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides...voir plus SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides long term heat stability - protects physical properties during storage and in the end use application. SONGNOX® 11B can also useful for stabilization of Polycarbonate, ABS, and Polyesters. voir moins | |
| SONGNOX® 1290 | Songwon International AG | SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polysty...voir plus SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polystyrene, ABS terpolymer, PVC, Polyamides, Polyurethanes, Elastomers, Adhesives, Rubbers such as EPDM, SBS and rubber blends with Polyolefins, and natural and synthetic tackifier resins. voir moins | |
| SONGNOX® 1330 | Songwon International AG | SONGNOX® 1330 is a primary antioxidant for organic polymers. It offers extraction resistant in water-quenched PP film lines. SONGNOX® 1330 exhibits high performance in controlling degradation of polyolefins. It is not absorbed by filler in polyolefins. | |
| SONGNOX® 1520 LQ | Songwon International AG | SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplasti...voir plus SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplastic elastomers. voir moins | |
| SONGNOX® 1680 | Songwon International AG | SONGNOX® 1680 is a secondary antioxidant for organic polymers. Applications include polyolefins, polycarbonate, polyester, and styrenics. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. | |
| SONGNOX® 1790 | Songwon International AG | SONGNOX® 1790 is a primary antioxidant for organic polymers. It offers high performance for sterically hindered phenolic antioxidants. It can be used for polyolefin, polyurethane, polystyrene, polyester and polyamide fiber. | |
| SONGNOX® 2450 | Songwon International AG | SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. I...voir plus SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. It is an effective antioxidant for styrenics, synthetic rubbers, POM homo & copolymer, polyurethanes, polyamides, polyesters, MBS and PVC. It can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. voir moins | |
| SONGNOX® 4120 | Songwon International AG | SONGNOX® 4120 is a secondary antioxidant for organic polymers. It is a sulfur containing antioxidant with high molecular weight, and the characteristics of low volatility and high performance. SONGNOX® 4120 performs as a better synergist with phenolic ant...voir plus SONGNOX® 4120 is a secondary antioxidant for organic polymers. It is a sulfur containing antioxidant with high molecular weight, and the characteristics of low volatility and high performance. SONGNOX® 4120 performs as a better synergist with phenolic antioxidant than SONGNOX® DLTDP & DSTDP and etc. It is effective in polyolefins and has high heat resistance and low leaching properties. voir moins | |
| SONGNOX® 4425 | Songwon International AG | SONGNOX® 4425 is a primary antioxidant for organic polymers. It is a non-discoloring antioxidant with a wide range of applications for thermoplastics and adhesives. SONGNOX® 4425 is highly effective in Polyamide and tire cod and high impact Polystyrene, A...voir plus SONGNOX® 4425 is a primary antioxidant for organic polymers. It is a non-discoloring antioxidant with a wide range of applications for thermoplastics and adhesives. SONGNOX® 4425 is highly effective in Polyamide and tire cod and high impact Polystyrene, ABS, Polyesters, most elastomers and rubbers. voir moins | |
| SONGNOX® 5650 | Songwon International AG | SONGNOX® 5650 is a high molecular weight, non-discoloring, non-staining, multifunctional phenolic antioxidant. It is an effective antioxidant for elastomers including BR, Polyisoprene, SBR, NBR, carboxylated SBR and SBS, SIS. SONGNOX® 5650 is used in adhe...voir plus SONGNOX® 5650 is a high molecular weight, non-discoloring, non-staining, multifunctional phenolic antioxidant. It is an effective antioxidant for elastomers including BR, Polyisoprene, SBR, NBR, carboxylated SBR and SBS, SIS. SONGNOX® 5650 is used in adhesives, tackifier resins, EPDM, ABS, impact polystyrenes, polyamides and polyolefins. voir moins | |
| SONGNOX® 611B | Songwon International AG | SONGNOX® 611B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefi...voir plus SONGNOX® 611B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefins. 611B also provides long term heat stability. It is also useful for stabilization of Polycarbonate, ABS, and Polyesters. voir moins | |
| SONGNOX® 621B | Songwon International AG | SONGNOX® 621B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefi...voir plus SONGNOX® 621B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefins. 621B also provides long term heat stability. It is also useful for stabilization of Polycarbonate, ABS, and Polyesters. voir moins | |
| SONGNOX® 6260 | Songwon International AG | SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and st...voir plus SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and styrenics. voir moins | |
| SONGNOX® 921B | Songwon International AG | SONGNOX® 921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term therma...voir plus SONGNOX® 921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term thermal stability. Can be used in Polyolefins, Polycarbonates, ABS, Polyesters. 921B can also be used in combination with polymeric UVAs and HALS. voir moins | |
| SONGNOX® 931B | Songwon International AG | SONGNOX® 931B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term therma...voir plus SONGNOX® 931B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term thermal stability. Can be used in Polyolefins, Polycarbonates, ABS, Polyesters. 931B can also be used in combination with polymeric UVAs and HALS. voir moins | |
| SONGNOX® DLTDP | Songwon International AG | SONGNOX® DLTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DLTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It can be used as ...voir plus SONGNOX® DLTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DLTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It can be used as a synergist in combination with phenolic antioxidants for enhanced aging and light stability. voir moins | |
| SONGNOX® DMTDP | Songwon International AG | SONGNOX® DMTDP is a secondary thio’s ester antioxidant for organic polymers. It can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum products. DMTDP is an efficient stabilizer for polyolefins, particularly PP and HD...voir plus SONGNOX® DMTDP is a secondary thio’s ester antioxidant for organic polymers. It can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum products. DMTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It is mainly used in PE, PP, ABS, HIPS, Polyester and polyamide. voir moins | |
| SONGNOX® DSTDP | Songwon International AG | SONGNOX® DSTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. Can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum p...voir plus SONGNOX® DSTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. Can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum products. It can also be used as a synergist in combination with phenolic antioxidants to enhance aging and light stability. voir moins | |
| SONGNOX® DTDTP | Songwon International AG | SONGNOX® DTDTP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DTDTP is an efficient stabilizer for polyolefins, particularly PP and HDPE. | |
| SONGNOX® OPS921B | Songwon International AG | SONGNOX® OPS921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent protection in Polyolefins and excellent processing and long term the...voir plus SONGNOX® OPS921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent protection in Polyolefins and excellent processing and long term thermal stability. OPS921B can be used in Polyolefins, Polycarbonates, ABS, Polyesters. voir moins | |
| SONGNOX® PQ | Songwon International AG | SONGNOX® PQ is a high performance secondary antioxidant for organic polymers. It is an effective in stabilization of polyolefins, elastomers, engineering plastic and adhesives. PQ has excellent color stability during compounding, fabrication and end-use, ...voir plus SONGNOX® PQ is a high performance secondary antioxidant for organic polymers. It is an effective in stabilization of polyolefins, elastomers, engineering plastic and adhesives. PQ has excellent color stability during compounding, fabrication and end-use, and improvement in the light stability. It is highly effective processing stabilizer and excellent discoloration inhibitor for organic polymers. voir moins | |
| SONGSORB® 1000 | Songwon International AG | SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to ...voir plus SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to a wide range of polymers. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use. voir moins | |
| SONGSORB® 2340 | Songwon International AG | SONGSORB® 2340 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It is particularly suitable for applica...voir plus SONGSORB® 2340 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It is particularly suitable for application characterized by high surface area, such as films and fibers. Applications include PET fibers and films, Polycarbonate, POM, Nylon, Polyolefins, TPE, TPO, and coatings. voir moins | |
| SONGSORB® 2908 | Songwon International AG | SONGSORB® 2908 provides antioxidant activity both during thermal processing and in moderate elevated temperatures due to radical scavenging mechanism. It exhibits excellent compatibility, low color contribution, low volatility and low toxicity. SONGSORB® ...voir plus SONGSORB® 2908 provides antioxidant activity both during thermal processing and in moderate elevated temperatures due to radical scavenging mechanism. It exhibits excellent compatibility, low color contribution, low volatility and low toxicity. SONGSORB® 2908 is an excellent ultraviolet light stabilizer for olefins, particularly pigmented opaque formulations, for applications such as pipes, drums, sheeting, marine, and garden. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use - synergizies well with UV absorbers and antioxidants which function as hydroperoxide decomposers. voir moins | |
| SONGSORB® 3260 | Songwon International AG | SONGSORB® 3260 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It can be used in combination with phen...voir plus SONGSORB® 3260 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use. voir moins | |
| SONGSORB® 3280 | Songwon International AG | SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low i...voir plus SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low initial color, good solubility in plasticizers and monomers, moderately low volatility, and excellent compatibility in a wide variety of substrates. SONGSORB® 3280 is recommended for use in polyolefins, PVC, styrene homo and copolymers, ABS, acrylic polymers, unsaturated polyesters, thermoplastic urethanes, moisture cured polyurethanes, polyacetals, polyvinylbutyral, two component epoxies and urethanes, oil alkyds and thermosetting acrylic enamels. voir moins | |
| Texicryl® 13-307 | Scott Bader | Texicryl® 13-307 is a carboxylated acrylic copolymer emulsion thickener that can be used for thickening ceramic tile adhesives when structuring with clays is not appropriate. | |
| Texicryl® 13-308 | Scott Bader | Texicryl® 13-308 is a carboxylated acrylic copolymer emulsion designed as a thickener for water-based formulations. It is used in the formulation of paints, waterborne coating systems, and ceramic tile adhesives. | |
| Texicryl® 13-309 | Scott Bader | Texicryl® 13-309 is a carboyxlated acrylic copolymer emulsion made for use as a thickener in emulsion paints and also thickens different adhesive compounds. It helps balance rheological properties of a paint and aids with application and flow properties. | |
| Texicryl® 13-312 | Scott Bader | Texicryl® 13-312 is a carboxylated acrylic copolymer emulsion thickener designed for use in water-based formulations. It is very effective in producing a stable viscosity response between pH 6.5 to 10. Texicryl® 13-312 is used in the formulation of const...voir plus Texicryl® 13-312 is a carboxylated acrylic copolymer emulsion thickener designed for use in water-based formulations. It is very effective in producing a stable viscosity response between pH 6.5 to 10. Texicryl® 13-312 is used in the formulation of construction adhesives, textured coatings, paints and waterborne coating systems. voir moins | |
| Texipol® 63-201 | Scott Bader | Texipol® 63-201 is an inverse emulsion thickener that imparts a stringy and mildly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-202 | Scott Bader | Texipol® 63-202 is an inverse emulsion thickener that imparts a pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-253 | Scott Bader | Texipol® 63-253 is an anionic inverse emulsion thickener which gives off a short flow to various aqueous and non-aqueous compositions and is effective across a broad pH range. It is provided as an easy-to-use low viscosity liquid which gives off a near-in...voir plus Texipol® 63-253 is an anionic inverse emulsion thickener which gives off a short flow to various aqueous and non-aqueous compositions and is effective across a broad pH range. It is provided as an easy-to-use low viscosity liquid which gives off a near-instantaneous thickening effect on direct mixing into the composition. Texipol® 63-253 is ideal for use for thickening wallpaper pre-paste adhesives, PVA and water-based building adhesives and high build/textured coatings. voir moins | |
| Texipol® 63-258 | Scott Bader | Texipol® 63-258 is an inverse emulsion thickener that imparts a highly pseudoplastic rheology to aqueous based compositions. | |
| Texipol® 63-303 | Scott Bader | Texipol® 63-303 is a high solids inverse emulsion polymer that has high efficiency and is used in a variety of water-based formulations. It can be used as a thickening PVA bonding aid and in construction and industrial adhesives. | |
| Texipol® 63-510 | Scott Bader | Texipol® 63-510 is an inverse emulsion designed to thicken over a wide pH range, exceptional performance at low pH. | |
| VAPORGUARD® R5341B | The International Group, Inc. (IGI Wax) | VAPORGUARD® R5341B is a water-based coating designed for corrugated board liners and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, and low rate of moisture vapor transmission (MVTR). |
