| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...voir plus AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. voir moins | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...voir plus AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). voir moins | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...voir plus AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). voir moins | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL MAM | Hoffmann Mineral | AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL MAM-R | Hoffmann Mineral | AKTISIL MAM-R is an activated SILLITIN V 85, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL PF 216 | Hoffmann Mineral | AKTISIL PF 216 is an activated SILLITIN Z 86, produced by modifying the surface with Bis-(3-triethoxy-silylpropyl)-tetrasulfane. Used as a functional filler either on its own or in combination with another non-reinforcing or reinforcing filler. | |
| AKTISIL PF 777 | Hoffmann Mineral | AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| AKTISIL Q | Hoffmann Mineral | AKTISIL Q is SILLITIN V 90* coated with methacryl silane. | |
| AKTISIL VM 56 | Hoffmann Mineral | AKTISIL VM 56 is an activated SILLITIN Z 86, produced by modifying the surface with Vinyl-triethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL VM 56/89 | Hoffmann Mineral | AKTISIL VM 56/89 is an activated SILLITIN Z 89, produced by modifying the surface with 3-Vinyltriethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...voir plus Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...voir plus Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...voir plus Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...voir plus Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...voir plus Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...voir plus Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® L-50E | UNITED INITIATORS GMBH & CO KG | Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...voir plus Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. voir moins | |
| Chlorez® 700 | Dover Chemical Corporation | Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, text...voir plus Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. Additionally, it can improve ancillary in various grades of rubber and shows excellent synergies with antimony trioxide. voir moins | |
| Chlorez® 700-S | Dover Chemical Corporation | Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, t...voir plus Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. voir moins | |
| Chloroflo 42 | Dover Chemical Corporation | Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used i...voir plus Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used in metal working applications as a straight or soluble oil for machining, drawing and stamping processes. Chloroflo 42 can be used in a variety of other applications including use as a flame retardant and plasticizer for paints and plastic production. voir moins | |
| Chlorowax® 40 | Dover Chemical Corporation | Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers an...voir plus Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers and EP metalworking packages. Chlorowax 40 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| Chlorowax® 50 | Dover Chemical Corporation | Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited t...voir plus Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. voir moins | |
| Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...voir plus Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...voir plus Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. voir moins | |
| Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...voir plus Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. voir moins | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...voir plus Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. voir moins | |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...voir plus Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. voir moins | |
| Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...voir plus Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. voir moins | |
| Crestomer® 1196PA | Scott Bader | Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured ...voir plus Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured or cured FRP skins. It also displays a tougher and more durable structural bond than a polyester bonding adhesive or a polyester resin/glass structure. Crestomer® 1196PA also exhibits reduced styrene emissions, great weight savings and more improved cosmetics with the ridding of core print through. Crestomer® 1196PA is suited for use in sandwich construction where the needs are for a high impact-resistant, strong and tough structure. voir moins | |
| Crestomer® Advantage 30 | Scott Bader | Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in...voir plus Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in 2 hours and 20 minutes. It is based on unique urethane acrylate technology and displays good impact strength and toughness. With the strong adhesion and gap filling qualities shown by Crestomer® Advantage 30, great flexibility in design is offered, along with time and cost savings. voir moins | |
| Crystic® BP 621CC 30 | Scott Bader | Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 45 | Scott Bader | Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 65 | Scott Bader | Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC White 20 | Scott Bader | Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical f...voir plus Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-78PA | Scott Bader | Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assemb...voir plus Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-79PA | Scott Bader | Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembl...voir plus Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-80PA | Scott Bader | Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanic...voir plus Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP moldings - including internal frames, inserts, ribs, panels, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-82PA | Scott Bader | Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specificall...voir plus Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specifically designed for the assembly and bonding of GRP moldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-83PA | Scott Bader | Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically design...voir plus Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically designed for the assembly and bonding of GRP moldings, including internal frames, inserts, ribs, panels, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-83PAHV | Scott Bader | Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically...voir plus Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-84PA | Scott Bader | Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effec...voir plus Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effective catalyst mix. This product is designed for non-structural applications where gap filling may be a secondary requirement. voir moins | |
| Crystic® BP 91-21PA | Scott Bader | Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifica...voir plus Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, hull-to-deck assemblies, composite constructions, and car body components. voir moins | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...voir plus Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. voir moins | |
| Crystic® Scottbond 117PA | Scott Bader | Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that a...voir plus Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that are standard in the GRP industry. Crystic® Scottbond 117PA shows good adhesion to GRP laminates, offering a stronger bond compared to resin and glass fiber in the laminate. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...voir plus D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. voir moins | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...voir plus D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...voir plus D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. voir moins | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...voir plus D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...voir plus D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...voir plus D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| DA-8506 | Dover Chemical Corporation | DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8506 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8506XS | Dover Chemical Corporation | DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when addi...voir plus DA-8506XS is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DA-8527 | Dover Chemical Corporation | DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additi...voir plus DA-8527 is a liquid stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It can be used in place of chlorinated paraffins when additional wetting and lubricity properties are desired in metal working applications. They can also be used as substitutes for chlorinated paraffins in lower temperature plasticizing applications. voir moins | |
| DO-8110 | Dover Chemical Corporation | DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applicatio...voir plus DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer or as an additive in EP metalworking packages. voir moins | |
| Dovermulse H-0700 | Dover Chemical Corporation | Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700...voir plus Dovermulse H-0700 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~750 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-0700 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1000 | Dover Chemical Corporation | Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000...voir plus Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000 is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1010-P | Dover Chemical Corporation | Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primaril...voir plus Dovermulse H-1010-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1010-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1020-P | Dover Chemical Corporation | Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primaril...voir plus Dovermulse H-1020-P is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1020-P is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovermulse H-1035-N | Dover Chemical Corporation | Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primaril...voir plus Dovermulse H-1035-N is a thick amber liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1035-N is primarily used as an intermediate for a variety of PIBSA derivatives. voir moins | |
| Dovernox® 10 | Dover Chemical Corporation | Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well s...voir plus Dovernox® 10 is a white free flowing powder, made of Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydrocinnamate) methane. It is a solid high molecular weight hindered phenolic antioxidant that can be used in a wide range of polymers. Dovernox 10 is well suited for use as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC, and polyurethanes. voir moins | |
| Dovernox® 76 | Dover Chemical Corporation | Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabili...voir plus Dovernox® 76 is a white crystline powder of Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. It is a solid high molecular weight hindered phenolic antioxidant that is effective in a wide range of polymers. Dovernox 76 can be used as an effective stabilizer for polyolefins, styrenics, block copolymers, elastomers, adhesives, PVC and polyurethanes. voir moins | |
| Dovernox® D-311 | Dover Chemical Corporation | Dovernox® D-311 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation, to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-321 | Dover Chemical Corporation | Dovernox® D-321 is an antioxidant blend in powder form, and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-480 and Dovernox® 10. | |
| Dovernox® D-911 | Dover Chemical Corporation | Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnam...voir plus Dovernox® D-911 is a blend of Doverphos® S-9228 and Dovernox® 10 in a 1/1 weight/weight ratio. Chemically, Doverphos® S-9228 is Bis(2,4-dicumylphenyl) pentaerythritol diphosphite and Dovernox® 10 is Tetrakis methylene (3,5-di-t-butyl-4-hydroxyhydro-cinnamate) methane. voir moins | |
| Dovernox® D-921 | Dover Chemical Corporation | Dovernox® D-921 is an antioxidant blend which has an advantage of low-dusting during handling and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Dovernox® 10. | |
| Dovernox® D-9411-T | Dover Chemical Corporation | Dovernox® D-9411T is a one to one blend of Doverphos® S-9228T and Doverphos® S-480. It is offered by Dover Chemical Corporation to be used in various polymer formulations as an excellent cost/performance processing stabilizer. | |
| Dovernox®D-721 | Dover Chemical Corporation | Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnama...voir plus Dovernox® D-721 is a white to off white powdered antioxidant blend and is offered by Dover Chemical Corporation to be used in various polymer formulations. It is a two-component blend of Doverphos® S-9228 and Octadecyl 3,5-di-t-butyl-4-hydroxyhydrocinnamate. voir moins | |
| Doverphos® 10 HR (TPP) | Dover Chemical Corporation | Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC...voir plus Doverphos® 10 HR (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, Doverphos® 10 HR (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC, and polycarbonates. voir moins | |
| Doverphos® 10 (TPP) | Dover Chemical Corporation | Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production...voir plus Doverphos® 10 (TPP) is a clear liquid made of triphenyl phosphite (TPP). Primarily used as an aryl phosphite stabilizer, it can be used in polyolefins to enhance the effect of polymerization catalyst. Doverphos® 10 (TPP) is well suited for the production of adhesives, polyurethanes, coatings, styrenics, polyesters, epoxies, PVC and polycarbonates. voir moins | |
| Doverphos® 11 | Dover Chemical Corporation | Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of r...voir plus Doverphos® 11 is a clear liquid made of tetraphenyl dipropyleneglycol diphosphite, which has a high phosphorus content and a high molecular weight but low viscosity. Primarily used as a heat stabilizer, Doverphos® 11 is well suited for the production of rigid and plasticized PVC applications where high gloss is important. voir moins | |
| Doverphos® 12 | Dover Chemical Corporation | Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and p...voir plus Doverphos® 12 is a clear liquid made from poly (dipropyleneglycol) phenyl phosphite, which has a high phosphorus content and high molecular weight. Primarily used as a heat stabilizer, Doverphos® 12 is well suited for use in the production of rigid and plasticized PVC applications where early color hold and brighter, more consistent color is important. voir moins | |
| Doverphos® 213 (DPP) | Dover Chemical Corporation | Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be e...voir plus Doverphos® 213 (DPP) is a clear liquid made of diphenyl phosphite which is a liquid diaryl phosphite with a relatively low molecular weight and a high phosphorus content. Primarily used as a secondary stabilizer in PVC, Doverphos® 213 (DPP) can also be effective in improving the color of unsaturated polyesters and minimize plateout during processing. voir moins | |
| Doverphos® 253 | Dover Chemical Corporation | Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC...voir plus Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC applications. In addition Doverphos® 253 can be used in lube applications as an additive for metalworking fluids. voir moins | |
| Doverphos® 4 (TNPP) | Dover Chemical Corporation | Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is w...voir plus Doverphos® 4 (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP). It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer for a wide variety of applications, Doverphos® 4 (TNPP) is well suited for use in the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR Plus (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverpho...voir plus Doverphos® 4-HR Plus (TNPP) is a clear liquid mad of trisnonylphenyl phosphite (TNPP) with approximately 1.00% triisopropanolamine. It is an aryl phosphite with high molecular weight and low phosphorus content. Primarily used as a heat stabilizer Doverphos® 4-HR Plus (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 4-HR (TNPP) | Dover Chemical Corporation | Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives...voir plus Doverphos® 4-HR (TNPP) is a clear liquid made of trisnonylphenyl phosphite (TNPP) with pproximately 0.75% triisopropanolamine. Primarily used as a heat stabilizer, Doverphos® 4-HR (TNPP) is well suited for the production of polyolefin, acrylics, adhesives, elastomers, nylon, polycarbonate, polyurethanes, polystyrene, PVC, coatings, ABS, and polyethylene terephthalate. voir moins | |
| Doverphos® 49 (TTDP) | Dover Chemical Corporation | Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatilit...voir plus Doverphos® 49 (TTDP) is a clear liquid made of Tris (Tridecyl) Phosphite which is a high molecular weight and low phosphorus content alkyl phosphate. Primarily used as a heat stabilizer, Doverphos® 49 (TTDP) has good hydrolytic stability and low volatility when mixed with additional metal heat stabilizers for production of PVC products. voir moins | |
| Doverphos® 6 (TDP) | Dover Chemical Corporation | Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give b...voir plus Doverphos® 6 (TDP) is a clear liquid made of triisodecyl phosphite which is an alkyl phosphite with a low molecular weight and high phosphorus content. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors and improve early color and clarity in un-pigmented compounds. Doverphos® 6 (TDP) is well suited for use in the production of polyolefins, polyurethanes, coatings, ABS, lubricants, and polyethylene terephthalate. voir moins | |
| Doverphos® 613 | Dover Chemical Corporation | Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary ...voir plus Doverphos® 613 is a clear liquid made of alkyl (C12-C15) Bisphenol A Phosphite. It is primarily used to improve the color, light stability, and clarity of PVC and vinyl copolymers and can be used as a secondary stabilizer when in conjunction with primary metal stabilizers and epoxy stabilizers that commonly used in these applications. Doverphos 613 is well suited for use in the production of isocyanates either MDI, TDI, aliphatic isocyanates, rigid PVC and rigid vinyl chloride copolymers. voir moins | |
| Doverphos® 7 (PDDP) | Dover Chemical Corporation | Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of poly...voir plus Doverphos® 7 (PDDP) is a clear liquid made of phenyl diisodecyl phosphite and is a high molecular weight with a low phosphorus content alkyl-aryl phosphite. Primarily used as a heat stabilizer, Doverphos® 7 (PDDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins | |
| Doverphos® 8 (DPDP) | Dover Chemical Corporation | Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the p...voir plus Doverphos® 8 (DPDP) is a clear liquid made of diphenyl isodecyl phosphite. Primarily used as a heat stabilizer, it can be used in rigid and plasticized PVC applications to give brighter, more consistent colors. Doverphos® 8 (DPDP) is well suited for the production of polyurethanes, coatings, ABS, and polycarbonates. voir moins |
