| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| ADDAPT® BioWet™ 25 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a polyhydroxy amide in water. It is used as a solvent-free wetting agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is non-foaming, biodegradable, and it improves pigment grinding. | |
| ADDAPT® BioWet™ 35 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, no...voir plus ADDAPT® BioWet™ 35 is a blend of polyalkylene glycols, dispersants, and polyhydroxy amide. It is used as a wetting/leveling agent in paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is biodegradable, solvent-free, non-foaming, and it improves pigment grinding. voir moins | |
| ADDAPT® BioWet™ 45 | ADDAPT Chemicals BV | ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pi...voir plus ADDAPT® BioWet™ is a blend of polyalkylene glycols and polyhydroxy amide. It is used as a wetting/leveling agent for paints, coatings, lacquers, adhesives, printing inks, and cleaning agents. This product is solvent-free, biodegradable, and it improves pigment grinding. voir moins | |
| ADDAPT® BioWet™ 450C | ADDAPT Chemicals BV | ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foamin...voir plus ADDAPT® BioWet™ 450C is a proprietary blend of polyalkylene glycols in water and surface-active compounds. It is used as a VOC-free wetting agent in paints, coatings, adhesives, printing inks, and cleaning agents. This product is biodegradable, low-foaming, completely soluble in water, and improves pigment grinding. voir moins | |
| ADDAPT® BioWet™ 75 | ADDAPT Chemicals BV | ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corros...voir plus ADDAPT® BioWet™ 75 is a polyhydroxy amide in water. It is used as a biodegradable wetting and leveling agent for coatings, lacquers, printing inks, adhesives, and cleaning agents. This product is non-foaming, improves pigment grinding, and has anti-corrosion properties. voir moins | |
| ADDAPT® DISP™ 400 | ADDAPT Chemicals BV | ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in pai...voir plus ADDAPT® DISP™ 400 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. voir moins | |
| ADDAPT® DISP™ 500 | ADDAPT Chemicals BV | ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...voir plus ADDAPT® DISP™ 500 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, paper coatings, and concrete. voir moins | |
| ADDAPT® DISP™ 600 | ADDAPT Chemicals BV | ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing in...voir plus ADDAPT® DISP™ 600 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for titanium dioxide, mineral pigments, fillers, colorants, and reactive pigments. This product is used in paint, printing ink, adhesives, paper coatings, and concrete. voir moins | |
| ADDAPT® DISP™ 800 | ADDAPT Chemicals BV | ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in...voir plus ADDAPT® DISP™ 800 is a low molecular weight polyacrylate dispersant with a sodium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. voir moins | |
| ADDAPT® DISP™ 900 | ADDAPT Chemicals BV | ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications...voir plus ADDAPT® DISP™ 900 is a low molecular weight polyacrylate dispersant with an ammonium cation. It is used as a solvent-free dispersant for mineral pigments and fillers, and it allows for high pigment loading at a low viscosity. This product has applications in paint, printing ink, adhesives, textiles, and concrete. voir moins | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...voir plus ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...voir plus ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ MP 51N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor poli...voir plus ADDAPT® Foamstop™ MP 51N is a proprietary blend of activated white oils. It is used as a foam control agent in low VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product has applications in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ MP 51P | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 51P is a powder based organic defoamer made from a combination of mineral oils and silicates. This product is used in cement, starch, paint, adhesives, plasters, and powdered detergents. | |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...voir plus ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ SL 10 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid tha...voir plus ADDAPT® Foamstop™ SL 10 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is a milky white liquid that is easily emulsifiable and is used in paint, printing ink, adhesives, and sewage treatment, among other applications. voir moins | |
| ADDAPT® Foamstop™ SL 30 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ...voir plus ADDAPT® Foamstop™ SL 30 is a silicone emulsion containing minerals and fatty acid based emulsifiers. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product is used in paint, printing ink, adhesives, and sewage treatment, among other applications. voir moins | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...voir plus ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ VF 35N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, l...voir plus ADDAPT® Foamstop™ VF 35N is a proprietary blend of oils with PAGs and surface active components. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® Foamstop™ VF 60 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster...voir plus ADDAPT® Foamstop™ VF 60 is a proprietary blend of oils with PAGs and surface-active components. It is an easily emulsifiable foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics, or pure Acrylics. This product is used in paint, plaster, adhesives, lubricants, and waste-water treatment. voir moins | |
| ADDAPT® PolySurF™ ACE | ADDAPT Chemicals BV | ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV ...voir plus ADDAPT® PolySurF™ ACE is the acrylic acid adduct of the epoxy ester of versatic acid. It is used as a solvent free additive in paints, lacquers, printing inks, and adhesives to provide benefits such as acid resistance, high gloss, pigment wetting, and UV stability. voir moins | |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...voir plus ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. voir moins | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...voir plus ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. voir moins | |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...voir plus ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. voir moins | |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...voir plus ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. voir moins | |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...voir plus AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. voir moins | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...voir plus AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). voir moins | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...voir plus AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). voir moins | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL MAM | Hoffmann Mineral | AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL MAM-R | Hoffmann Mineral | AKTISIL MAM-R is an activated SILLITIN V 85, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL PF 216 | Hoffmann Mineral | AKTISIL PF 216 is an activated SILLITIN Z 86, produced by modifying the surface with Bis-(3-triethoxy-silylpropyl)-tetrasulfane. Used as a functional filler either on its own or in combination with another non-reinforcing or reinforcing filler. | |
| AKTISIL PF 777 | Hoffmann Mineral | AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| AKTISIL Q | Hoffmann Mineral | AKTISIL Q is SILLITIN V 90* coated with methacryl silane. | |
| AKTISIL VM 56 | Hoffmann Mineral | AKTISIL VM 56 is an activated SILLITIN Z 86, produced by modifying the surface with Vinyl-triethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL VM 56/89 | Hoffmann Mineral | AKTISIL VM 56/89 is an activated SILLITIN Z 89, produced by modifying the surface with 3-Vinyltriethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Anti-foam Agent BLK-6618 | BELIKE Chemical Co.,Ltd. | Anti-foam Agent BLK-6618 is a coating additive that is in the form of a white liquid. This product is most commonly used as a defoamer in water-based printing paste, paper coatings, and adhesives. | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...voir plus Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...voir plus Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...voir plus Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...voir plus Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...voir plus Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...voir plus Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® L-50E | UNITED INITIATORS GMBH & CO KG | Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...voir plus Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. voir moins | |
| Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...voir plus Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...voir plus Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. voir moins | |
| Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...voir plus Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. voir moins | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...voir plus Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. voir moins | |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...voir plus Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. voir moins | |
| Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...voir plus Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. voir moins | |
| Crestomer® 1196PA | Scott Bader | Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured ...voir plus Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured or cured FRP skins. It also displays a tougher and more durable structural bond than a polyester bonding adhesive or a polyester resin/glass structure. Crestomer® 1196PA also exhibits reduced styrene emissions, great weight savings and more improved cosmetics with the ridding of core print through. Crestomer® 1196PA is suited for use in sandwich construction where the needs are for a high impact-resistant, strong and tough structure. voir moins | |
| Crestomer® Advantage 30 | Scott Bader | Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in...voir plus Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in 2 hours and 20 minutes. It is based on unique urethane acrylate technology and displays good impact strength and toughness. With the strong adhesion and gap filling qualities shown by Crestomer® Advantage 30, great flexibility in design is offered, along with time and cost savings. voir moins | |
| Crystic® BP 621CC 30 | Scott Bader | Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 45 | Scott Bader | Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 65 | Scott Bader | Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC White 20 | Scott Bader | Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical f...voir plus Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-78PA | Scott Bader | Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assemb...voir plus Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-79PA | Scott Bader | Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembl...voir plus Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-80PA | Scott Bader | Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanic...voir plus Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP moldings - including internal frames, inserts, ribs, panels, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-82PA | Scott Bader | Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specificall...voir plus Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specifically designed for the assembly and bonding of GRP moldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-83PA | Scott Bader | Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically design...voir plus Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically designed for the assembly and bonding of GRP moldings, including internal frames, inserts, ribs, panels, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-83PAHV | Scott Bader | Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically...voir plus Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-84PA | Scott Bader | Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effec...voir plus Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effective catalyst mix. This product is designed for non-structural applications where gap filling may be a secondary requirement. voir moins | |
| Crystic® BP 91-21PA | Scott Bader | Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifica...voir plus Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, hull-to-deck assemblies, composite constructions, and car body components. voir moins | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...voir plus Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. voir moins | |
| Crystic® Scottbond 117PA | Scott Bader | Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that a...voir plus Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that are standard in the GRP industry. Crystic® Scottbond 117PA shows good adhesion to GRP laminates, offering a stronger bond compared to resin and glass fiber in the laminate. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...voir plus D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. voir moins | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...voir plus D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...voir plus D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. voir moins | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...voir plus D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...voir plus D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...voir plus D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| GLOXIL iM16k A | Hoffmann Mineral | GLOXIL iM16k A is based on hollow glass microspheres from 3M, this product brings further improvements in plastics where weight reduction is an important issue thanks to its surface modification. | |
| GLOXIL iM16k MAM | Hoffmann Mineral | GLOXIL iM16k MAM is a micro hollow glass sphere whose surface has been modified with a special methacrylic functional group. The process parameters are selected in such a way that, on one hand, anchoring to the surface takes place and, on the other hand, ...voir plus GLOXIL iM16k MAM is a micro hollow glass sphere whose surface has been modified with a special methacrylic functional group. The process parameters are selected in such a way that, on one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable by-products, such as occur during in-situ mixing, are therefore practically completely prevented. voir moins | |
| GLOXIL SF 91 A | Hoffmann Mineral | GLOXIL SF 91 A is a hybrid filler made of fiber and Neuburg Siliceous Earth with subsequent modification produces very good properties in plastics where a good mix of rigidity and flexibility is required. | |
| GLOXIL WW SL | Hoffmann Mineral | GLOXIL WW SL is an aqueous dispersion based on modified silica for use in matt water-based coatings improves incorporation, transparency and resistance. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. |
