4892-SD-50 Epoxy Ester | Gabriel Performance Products | 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...voir plus 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. voir moins | |
AKT-855 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
AKT853 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
AKT865 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
AKT867 | Gelest, Incorporated | Catalyst for silicone condensation RTV's. | |
ALT-143 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-173 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-192 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-213 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-233 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-251 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-263 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-292 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-563 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
ALT-652 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
AMS-132 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-152 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-162 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-233 | Gelest, Incorporated | Aminoethylaminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
AMS-242 | Gelest, Incorporated | Aminoethylaminoisobutylmethylsiloxane-dimethylsiloxane copolymer. | |
ATM-1112 | Gelest, Incorporated | Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer. | |
ATM-1322 | Gelest, Incorporated | Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer. | |
Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...voir plus Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...voir plus Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...voir plus Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...voir plus Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...voir plus Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...voir plus Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
Benox® L-50E | UNITED INITIATORS GMBH & CO KG | Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...voir plus Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. voir moins | |
CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...voir plus CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
CAPCURE® 3830-81 | Gabriel Performance Products | CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine an...voir plus CAPCURE® 3830-81 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3830-81 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
CAPCURE® 3830-CB | Gabriel Performance Products | CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves ...voir plus CAPCURE® 3830-CB is a mercaptan based epoxy hardener which provides a gel time of approximately 30 minutes with a standard bis-phenol A epoxy resin mixed at a 1:1 ratio under ambient conditions. CAPCURE® 3830-CB is a mercaptan curing agent that improves bonds between glass and metal, especially brass and bronze. This material is ideal for two-component mixing equipment in assembly line use when mixed at a 1:1 epoxy/hardener ratio. CAPCURE® 3830-CB can be used as a catalyst or co-curing material where it will impart properties typical of mercaptans and provide improved adhesion. voir moins | |
CAPCURE® 3850-101 | Gabriel Performance Products | CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine ...voir plus CAPCURE® 3850-101 is a medium viscosity, catalyzed mercaptan epoxy curing agent designed specifically for rapid cure in the 3 to 5 minute range at room temperature. CAPCURE® 3850-101 may be used both, as a sole curing agent or as an accelerator for amine and amide or amido-amine curative chemistries. The fast-set characteristics of this product over a wide temperature range (30 °F to 100 °F) offers utility in industrial, coatings, civil engineering and fast-set adhesive application areas. voir moins | |
DBE-224 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-621 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-712 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-814 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBE-821 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBP-534 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DBP-732 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
DES-T03 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T11 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T12 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T15 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DES-T23 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
DMS-A11 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A12 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A15 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A21 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A211 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
DMS-A214 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
DMS-A31 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A32 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
DMS-A32R | Gelest, Incorporated | Reduced volatility grade aminopropyl terminated polydimethylsiloxane. | |
DMS-B12 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
DMS-B25 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
DMS-B31 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
DMS-H03 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H11 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H21 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H25 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H31 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-H41 | Gelest, Incorporated | Hydride terminated polydimethylsiloxane. | |
DMS-L21 | Gelest, Incorporated | Chloromethyl terminated polydimethylsiloxane. | |
DMS-T21 | Gelest, Incorporated | General purpose silicone composed of polymer chains with unique flexibility. It has virtually no energy barrier for rotation resulting in one of the lowest glass-transition temperatures of any polymer. | |
DMS-T21M50 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
DMS-T25 | Gelest, Incorporated | General purpose silicone composed of polymer chains with unique flexibility. It has virtually no energy barrier for rotation resulting in one of the lowest glass-transition temperatures of any polymer. | |
DMS-T31M50 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
DMS-T41M50 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
DMS-T51B20 | Gelest, Incorporated | Silicone fluid blend. | |
DMS-T51M35 | Gelest, Incorporated | Easy to use, water-dilutable, fine particle dispersion of conventional polydimethylsiloxane fluid. Employed as a release agent and lubricant in a variety of rubber and plastic applications. | |
DMS-T72B15 | Gelest, Incorporated | Silicone fluid blend. | |
FMS-121 | Gelest, Incorporated | Fluorosilicone fluid that is useful in a wide range of aggressive service environments. Has a number of unique applications due to its chemical and solvent resistance to lubricity. | |
FMS-123 | Gelest, Incorporated | Fluorosilicone fluid that is useful in a wide range of aggressive service environments. Has a number of unique applications due to its chemical and solvent resistance to lubricity. | |
FMS-131 | Gelest, Incorporated | Fluorosilicone fluid that is useful in a wide range of aggressive service environments. Has a number of unique applications due to its chemical and solvent resistance to lubricity. | |
FMS-141 | Gelest, Incorporated | Fluorosilicone fluid that is useful in a wide range of aggressive service environments. Has a number of unique applications due to its chemical and solvent resistance to lubricity. | |
FMS-221 | Gelest, Incorporated | Fluorosilicone fluid that is useful in a wide range of aggressive service environments. Has a number of unique applications due to its chemical and solvent resistance to lubricity. | |
GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...voir plus GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...voir plus GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. voir moins | |
GABEPRO® GPM-800LO | Gabriel Performance Products | GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and...voir plus GABEPRO® GPM-800LO is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. GPM-800LO is formulated to have an improved odor relative to our standard product. voir moins | |
GABEPRO® GPM-888 | Gabriel Performance Products | GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...voir plus GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. voir moins | |
GABEPRO® GPM-891 | Gabriel Performance Products | GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinnin...voir plus GABEPRO® GPM-891 is an easy to use epoxy curing agent with reduced odor and provides a non-yellowing casting color. The amine additive in GPM-891 is formaldehyde-free and is less sensitive to the addition of a chelator that can be used help reduce skinning problems. GABEPRO® GPM-891 is designed to provide a gel time of 5 minutes when formulated with a standard bis-phenol A epoxy resin. voir moins | |
GELEST GEL P065 | Gelest, Incorporated | Temporarily deformable material with excellent low temperature properties. It performs as a dielectric gel -115 to 235 degrees Celsius. | |
HARDSIL™ AM | Gelest, Incorporated | Primerless silicone resin dispersed in a mixture of alcohols including methanol, n-butanol and isopropanol. | |
HARDSIL™ AP | Gelest, Incorporated | Primerless phenyl modified silicone dispersed in xylene for continuous use at temperatures up to 360 degrees Celsius. | |
HARDSIL™ AR | Gelest, Incorporated | Primerless modified phenyl silicone resin dispersed in xylene for continuous use at temperatures up to 325 degrees Celsius. | |
HMS-013 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-031 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-064 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-071 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-082 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-151 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-301 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-501 | Gelest, Incorporated | Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. | |
HMS-991 | Gelest, Incorporated | Trimethylsiloxy terminated polymethylhydrosiloxane. | |
HMS-992 | Gelest, Incorporated | Trimethylsiloxy terminated polymethylhydrosiloxane. | |
HMS-993 | Gelest, Incorporated | Trimethylsiloxy terminated polymethylhydrosiloxane. | |
HMS-H271 | Gelest, Incorporated | Hydride terminated methylhydrosiloxane-dimethylsiloxane copolymer. |