| BurnEx™ 30-107 | Nyacol Nano Technology | BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...voir plus BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ A1582 | Nyacol Nano Technology | BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester. | |
| BurnEx™ ADP480 | Nyacol Nano Technology | BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives | |
| BurnEx™ ADP494 | Nyacol Nano Technology | BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones. | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...voir plus BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...voir plus BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. voir moins | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...voir plus BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| GENIOSIL® GF 56 | Wacker Chemical Corporation | GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesiv...voir plus GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesives, emulsion paint, coatings and plastics crosslinking. voir moins | Request Sample |
| GENIOSIL® GF 62 | Wacker Chemical Corporation | GENIOSIL® GF 62 is mainly used in acetoxy- crosslinking silicone sealants, in which it functions as a crosslinker and/or adhesion promoter. In addition, GENIOSIL® GF 62 is used in the production of surface-modified fillers, as a water scavenger and as a p...voir plus GENIOSIL® GF 62 is mainly used in acetoxy- crosslinking silicone sealants, in which it functions as a crosslinker and/or adhesion promoter. In addition, GENIOSIL® GF 62 is used in the production of surface-modified fillers, as a water scavenger and as a primer component. voir moins | Request Sample |
| GENIOSIL® GF 82 | Wacker Chemical Corporation | GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion p...voir plus GENIOSIL® GF 82 is an epoxy functional alkoxysilane. It´s a clear, colorless liquid with a characteristic gasoline-like odor. It is able to function as a molecular bridge between inorganic and organic substrates and can be applied in adhesives, emulsion paint and coatings. voir moins | Request Sample |
| GENIOSIL® GF 9 | Wacker Chemical Corporation | GENIOSIL® GF 9 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, p...voir plus GENIOSIL® GF 9 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, polyamides, polyacrylates, polyurethanes, ethylene/vinyl acetate copolymers and many other. voir moins | Request Sample |
| GENIOSIL® GF 91 | Wacker Chemical Corporation | GENIOSIL® GF 91 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, ...voir plus GENIOSIL® GF 91 is mainly used as a surface modifier for glass fibers, glass-fiber fabrics, fillers (e.g. glass or mineral wool, mica, talc, wollastonite, kaolin, christobalite, metal oxides) and pigments used in various plastics, including epoxy resins, polyamides, polyacrylates, polyurethanes, ethylene/vinyl acetate copolymers and many others. voir moins | Request Sample |
| GENIOSIL® GF 92 | Wacker Chemical Corporation | GENIOSIL® GF 92 is used mainly as an adhesion promoter in sealants, adhesives and coatings, as a surface modifier for fillers and for production of silane-modified polymers as binder in sealants and adhesives. It is highly miscible with standard organic s...voir plus GENIOSIL® GF 92 is used mainly as an adhesion promoter in sealants, adhesives and coatings, as a surface modifier for fillers and for production of silane-modified polymers as binder in sealants and adhesives. It is highly miscible with standard organic solvents, such as ethers and hydrocarbons. Mixing with ketones results in imine formation, while mixing with alcohols other than methanol leads to an autocatalytic exchange of alkoxy groups until the system reaches thermodynamic equilibrium. voir moins | Request Sample |
| GENIOSIL® GF 93 | Wacker Chemical Corporation | GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in th...voir plus GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in the presence of moisture (Ethanol is released) to form silanols, which can subsequently react with themselves to produce siloxanes or can bind to inorganic substrates. It is applied in adhesives, emulsion paint, coatings, filler treatment. voir moins | Request Sample |
| GENIOSIL® GF 95 | Wacker Chemical Corporation | GENIOSIL® GF 95 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor.Due to the nature of the amino group, this substance reacts as a base. | Request Sample |
| GENIOSIL® GF 98 | Wacker Chemical Corporation | GENIOSIL® GF 98 is an alkoxysilane with an amino-functional group. It is a clear, colorless to light yellowish liquid with a characteristically aromatic odor. The compound reacts with moisture under hydrolysis of the alkoxy groups and forms silanols, whic...voir plus GENIOSIL® GF 98 is an alkoxysilane with an amino-functional group. It is a clear, colorless to light yellowish liquid with a characteristically aromatic odor. The compound reacts with moisture under hydrolysis of the alkoxy groups and forms silanols, which reacts further forming siloxane. voir moins | Request Sample |
| GENIOSIL® STP-E10 | Wacker Chemical Corporation | GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E15 | Wacker Chemical Corporation | GENIOSIL® STP-E 15 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E30 | Wacker Chemical Corporation | GENIOSIL® STP-E 30 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® STP-E35 | Wacker Chemical Corporation | GENIOSIL® STP-E 35 is a polyether-based silane-terminated polymer suitable as a binder in moisture curing formulations. It is a clear liquid with a slight but characteristic odor and differs to conventional silylated polymers due to its high reactivity. | Request Sample |
| GENIOSIL® XL 10 | Wacker Chemical Corporation | GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It ca...voir plus GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, all-purpose adhesives, assembly adhesives, coatings, construction adhesives, emulsion paint, industrial adhesives, parquet adhesives and plastics crosslinking. voir moins | Request Sample |
| GENIOSIL® XL 12 | Wacker Chemical Corporation | GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIO...voir plus GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIOSIL® XL 12 is an unsaturated organic compound and can be incorporated into organic polymers by radical grafting or co-polymerization. It can be applied in adhesives, emulsion paint, coatings and plastics crosslinking. voir moins | Request Sample |
| GENIOSIL® XL 33 | Wacker Chemical Corporation | GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...voir plus GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, emulsion paints and coatings. voir moins | Request Sample |
| GENIOSIL® XL 63 | Wacker Chemical Corporation | GENIOSIL® XL 63 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 63 is of substantial i...voir plus GENIOSIL® XL 63 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 63 is of substantial importance in systems that cure very rapidly at room temperature on exposure to (atmospheric) moisture. voir moins | Request Sample |
| GENIOSIL® XL 65 | Wacker Chemical Corporation | GENIOSIL® XL 65 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 65 is of substantial i...voir plus GENIOSIL® XL 65 is characterized by its high reactivity toward moisture, a direct consequence of the structural proximity of the nitrogen atom to the silicon atom (alpha-effect).On account of its highly reactive nature, GENIOSIL® XL 65 is of substantial importance in systems that cure very rapidly at room temperature on exposure to (atmospheric) moisture. voir moins | Request Sample |
| GENIOSIL® XL 926 | Wacker Chemical Corporation | GENIOSIL® XL 926 binds via its aminomethyl group to electrophilic groups in resins and polymers. Aside from groups such as epoxides and esters, it is particularly the isocyanate groups present in polyurethanes that are important here.GENIOSIL® XL 926 is c...voir plus GENIOSIL® XL 926 binds via its aminomethyl group to electrophilic groups in resins and polymers. Aside from groups such as epoxides and esters, it is particularly the isocyanate groups present in polyurethanes that are important here.GENIOSIL® XL 926 is characterized by its high reactivity toward moisture, a direct consequence of the nitrogen atom's proximity to the silicon atom within the molecule (alpha-effect). voir moins | Request Sample |
| HDK® H13L | Wacker Chemical Corporation | Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. | Request Sample |
| HDK® H15 | Wacker Chemical Corporation | HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers...voir plus HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 acts as a free flow additive in the production of technical powders. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a residual silanol content of 50%, and a pH value of 3,8-4,8. voir moins | Request Sample |
| HDK® H17 | Wacker Chemical Corporation | Synthetic, hydrophobic, amorphous silica, produced via flame hydrolysis. | Request Sample |
| HDK® H18 | Wacker Chemical Corporation | HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. Th...voir plus HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a carbon content of approx. 4,5%, and a pH value of 4,0-6,8. voir moins | Request Sample |
| HDK® N20 | Wacker Chemical Corporation | HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in el...voir plus HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 acts as a free flow additive in the production of technical powders. voir moins | Request Sample |
| HDK® N20D | Wacker Chemical Corporation | HDK® N20D is a synthetic, hydrophilic amorphous silica that is produced via flame hydrolysis. It is ideally used in adhesives, anitperspirants, coil coatings, decorative cosmetics, hair care, powder coatings, shaving, sun scree, skin care, tooth pastes, a...voir plus HDK® N20D is a synthetic, hydrophilic amorphous silica that is produced via flame hydrolysis. It is ideally used in adhesives, anitperspirants, coil coatings, decorative cosmetics, hair care, powder coatings, shaving, sun scree, skin care, tooth pastes, and various other applications. This product has a BET surface of 170-230 m2/g, a loss of weight of < 2%, and a sieve residue of < 0.03%. voir moins | Request Sample |
| HDK® V15A | Wacker Chemical Corporation | Synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| NexSil™ 12 | Nyacol Nano Technology | NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder and more. voir moins | |
| NexSil™ 125-40 | Nyacol Nano Technology | NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an ant...voir plus NexSil™ 125-40 is an alkaline dispersion of 70 - 90 nm colloidal silica at a 40% SiO2 concentration in water. The product can be used in paper, steel and precision polishing applications where large particle size colloidal silica is required and as an anti-slip coating. voir moins | |
| NexSil™ 125A | Nyacol Nano Technology | NexSil™ 125A is an acidic dispersion of 60 - 80 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications where large-particle size colloidal silica is required. | |
| NexSil™ 125K-40 | Nyacol Nano Technology | NexSil™ 125K-40 is a colloidal silica at a 40% SiO2 concentration in water. A large particle product, it is primarily intended as an abrasive for formulated polishing slurries. | |
| NexSil™ 125NH4 | Nyacol Nano Technology | NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among ...voir plus NexSil™ 125NH4 is an ammonia-stabilized, aqueous dispersion of 85 nm colloidal silica at a 40% SiO2 concentration in water. This product has applications in surface modifications for cardboard coatings, anti-blocking effects for films and coatings, among others. voir moins | |
| NexSil™ 12HS | Nyacol Nano Technology | NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binde...voir plus NexSil™ 12HS is an alkaline dispersion of 12 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 20 | Nyacol Nano Technology | NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatm...voir plus NexSil™ 20 is an alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a small particle size colloidal silica is required. voir moins | |
| NexSil™ 20A | Nyacol Nano Technology | NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for us...voir plus NexSil™ 20A is an acidic dispersion of 20 nm colloidal silica at 30% concentration. The product is used as a low sodium colloidal silica binder in investment casting and fibrous refractory applications, to formulate catalyst support structures, and for use with trivalent chromium conversion coatings, among other applications. voir moins | |
| NexSil™ 20K-30 | Nyacol Nano Technology | NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile...voir plus NexSil™ is a potassium-stabilized alkaline dispersion of 20nm colloidal silica at 30% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder, or other applications where a small particle-size colloidal silica is required. voir moins | |
| NexSil™ 20NH4 | Nyacol Nano Technology | NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, cat...voir plus NexSil™ 20NH4 is an ammonia-stabilized alkaline dispersion of 20 nm colloidal silica at 40% SiO2 concentration in water. It can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications. voir moins | |
| NexSil™ 35A | Nyacol Nano Technology | NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates...voir plus NexSil™ 35A is an acidic colloidal silica dispersion of 35nm collidal silica at 30% SIO2 concentration in water. This product is used in binders, cardboard coatings, films, coatings, catalyst production, and precision polishing of semiconductor substrates. voir moins | |
| NexSil™ 6 | Nyacol Nano Technology | NexSil™ 6 is an alkaline dispersion of 6 nm colloidal silica at a 16-18% SiO2 concentration in water. It can be used in paper, steel, and precision polishing applications as well. | |
| NexSil™ 8 | Nyacol Nano Technology | NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or...voir plus NexSil™ 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required. voir moins | |
| NexSil™ 85-40 | Nyacol Nano Technology | NexSil™ 85-40 is an alkaline dispersion of 40-60 nm colloidal silica at a 40% SiO2 concentration in water. The product is used in paper, steel and precision polishing applications as well as specialty wafer polishing applications. | |
| NexSil™ 85A | Nyacol Nano Technology | NexSil™ 85A is an acidic dispersion of 40 - 60 nm colloidal silica at a 30% SiO2 concentration in water. The product can be used in paper, steel, and precision polishing applications. | |
| NexSil™ 85K-40 | Nyacol Nano Technology | NexSil™ 85K-40 is a colloidal silica of 50 nm colloidal silica at a 40% SiO2 concentration in water. This product is used as an abrasive for formulated polishing slurries. | |
| NexSil™ 85NH4 | Nyacol Nano Technology | NexSil™ 85NH4 is an ammonia-stabilized alkaline dispersion of 85 nm colloidal silica at 40% SiO2 concentration in water with low alkali metal levels. It is used in a wide variety of applications such as paper, steel and precision polishing applications. | |
| Nyacol ® DP5540 | Nyacol Nano Technology | Nyacol DP5540, colloidal silica in ethylene glycol, is a dispersion of nano-sized silica particles with a particle size between 100 and 120 nm. It is used in abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol ® DP5480 | Nyacol Nano Technology | Nyacol DP5480, Colloidal Silica in Ethylene Glycol, are Silica particles with a particle size of 50nm colloidal silica at a 30% SiO2 concentration in water. The polymer-grade EG provides abrasion resistance and anti-blocking properties for PET film. | |
| Nyacol® DP5820 | Nyacol Nano Technology | Nycaol® DP5820, Colloidal Silica in Ethylene Glycol, is an ethylene glycol silica additive with a particle size of 20nm. This product is developed to provide anti-block and abrasion resistance properties to polyester film and tape. | |
| Nyacol® A1530 | Nyacol Nano Technology | Nyacol® A1530 is a water-based dispersion of 30nm particle antimony at 29% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1540N | Nyacol Nano Technology | Nyacol® A1540N is a water-based dispersion of 30nm particle antimony at 38% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550 | Nyacol Nano Technology | Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550pH7 | Nyacol Nano Technology | Nyacol® A1550pH7 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 7. It is used in the flame retardant treatments of DMAC solvent systems. | |
| Nyacol® AB40 | Nyacol Nano Technology | Nyacol® AB40 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.67. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® AL20 | Nyacol Nano Technology | Nyacol® AL20 Colloidal Alumina, a high temperature coating/binder, is a water-based dispersion of particle size 60-90nm at 20% Aluminum content. It is used within high-temperature binders for refractories and ceramics. | |
| Nyacol® AL20SD | Nyacol Nano Technology | Nyacol® AL20SD is an alumina powder with a particle size of 60-90nm, a high-temperature coating/binder, that is dispersible in either water or ethylene glycol. This product is used in coating/binder applications where a water-based system cannot be used. | |
| Nyacol® AL25 | Nyacol Nano Technology | Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and pa...voir plus Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AL25-HP | Nyacol Nano Technology | Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper co...voir plus Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AP50 | Nyacol Nano Technology | Nyacol® AP50 is a dispersion of nano-sized (colloidal) antimony pentoxide particles in a tertiary amine. The product is used in liquid flame-retarded epoxy systems, in aerospace structural prepregs, and in printed circuit boards. | |
| Nyacol® APE1540 | Nyacol Nano Technology | Nyacol® APE1540 is a nonaqueous dispersion of colloidal antimony peroxide with a specific gravity of 1.70. It is used as a flame retardant synergist in halogen containing polyester and vinyl ester resins. | |
| Nyacol® APE3040 | Nyacol Nano Technology | Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromin...voir plus Nyacol® APE3040 is a nonaqueous dispersion of colloidal antimony pentoxide formulated for use as a flame retardant synergist in halogen-containing vinyl ester and unsaturated polyester resins. It can replace antimony trioxide in formulas containing bromine or chlorine and can be used in textiles, adhesives, coatings, and water-based systems. voir moins | |
| Nyacol® CeO2 | Nyacol Nano Technology | Nyacol® CeO2 is cerium oxide. This product is designed for use in automotive and other catalyst production. Nyacol® CeO2 is used in glass polishing and coating applications. | |
| NYACOL® DP6095 | Nyacol Nano Technology | NYACOL® DP6095 is a sub-micron calcium carbonate dispersion in ethylene glycol recommended for use as an additive in PET for film or fiber production. | |
| Nyacol® SN15 | Nyacol Nano Technology | Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15 is a colloidal tin oxide with a water carrier and a counter potassium ion concentration of 0.5%. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15 is used in coatings and sealants. voir moins | |
| Nyacol® SN15CG | Nyacol Nano Technology | Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potent...voir plus Nyacol® SN15CG is a colloidal tin oxide in a water carrier with an counter ion concentration of .23% ammonia. This product is designed for use as a binder in ceramic or catalyst applications, a passivation agent, an anti-scuff agent on glass, and a potential conductor in glass. Nyacol® SN15ES is used in coatings and sealants. voir moins | |
| Nyagraph ® 249 | Nyacol Nano Technology | Nyagraph® 249 is a natural material based on the processing of graphite ore. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 200 | Nyacol Nano Technology | Nyagraph® 200 is a natural material based on the processing of graphite ore with a fine particle size of 80%>180 microns. This product is an intumescent flame retardant used in sealants, adhesives, and coatings and has applications in soft ash, plastic. | |
| Nyagraph® 250 | Nyacol Nano Technology | Nyagraph® 250 is a natural material based on the processing of graphite ore with an expansion volume of >250cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 251 | Nyacol Nano Technology | Nyagraph® 251 is a natural material based on the processing of graphite ore with a minimum of 250ml/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 35 | Nyacol Nano Technology | Nyagraph® 35 is a natural material based on the processing of graphite ore with an expansion volume of ≥35cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 351 | Nyacol Nano Technology | Nyagraph® 351 is a natural material based on the processing of graphite ore with an expansion volume of 330-350cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® FP | Nyacol Nano Technology | Nyagraph® FP is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® KP251 | Nyacol Nano Technology | Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatin...voir plus Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. voir moins | |
| Nyasil™ 20 | Nyacol Nano Technology | Nyasil™ 20, a nano-structured amorphous silica powder, is an ethylene glycol silica additive with a mean particle diameter of 20μm. This product is used with polyester film and tape. |
