| Amorphous Silica Microspheres & Nanospheres | Cospheric LLC | Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactan...voir plus Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactants or stabilizers. Silane coatings enable silica microspheres to be modified to generate functional groups or alter surface properties. Additional advantage of silica microspheres is glass transition temperature of over 1000 degrees Celsius, which makes them suitable for high temperature applications. Silica microspheres and nanospheres are composed of synthetic amorphous silica made in a laboratory batch environment. voir moins | |
| Barium Titanate Glass Spheres & Microspheres | Cospheric LLC | Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much hig...voir plus Barium titanate glass is a unique optical glass formulation based on a large percentage of Barium Oxide (BaO) and Titanium Oxide (TiO2), as opposed to other traditional glass formulas which are mostly Silica (SiO2). Barium titanate glass offers a much higher refractive index compared to other glass formulations. Refractive Index is the ratio of the speed of light in a vacuum to the speed of light in the specified material - a description of how light slows down as it passes through an optical material. High refractive index microspheres are critical when used for optical systems where high refractive power is required such as endoscopy, micro-optics, defense and microscopy. Barium titanate glass microspheres will reflect back more light directly to the viewer. High index of refraction enables retroreflectivity which is often desired in guard rails, traffic signs, reflective paint, tape or clothing. Barium titanate glass hemispherically coated with aluminum ensures that the light bounces off the aluminum- coated half of the sphere and produces the retroreflective effect for high visibility in dark conditions. voir moins | |
| Borosilicate Glass Spheres & Microspheres | Cospheric LLC | Borosilicate Glass is well-known for its durability, low coefficient of expansion, low density, high softening point, high resistance to acids and thermal shock, compared to other glass formulations. The chemical composition consists primarily of silicon ...voir plus Borosilicate Glass is well-known for its durability, low coefficient of expansion, low density, high softening point, high resistance to acids and thermal shock, compared to other glass formulations. The chemical composition consists primarily of silicon oxide (SiO2) and boron oxide (B2O3). Solid Glass Microspheres, also called glass beads, provide multiple benefits including enhanced processing, excellent chemical and heat resistance, thermal stability, low oil absorption, and are often used in automotive, electrical, household appliance, adhesives, packaging, paint and construction industries. Glass is non-toxic, extremely stable and recyclable. Cospheric specializes in solid glass microspheres with perfect sphericity, tight tolerances and particle size distributions for biomedical, life sciences, microscopy, automotive, high-tech equipment and specialty applications. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DABCO® 1027 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 1027 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled activity catalyst for MEG extended polyester and polyether systems. | |
| DABCO® 1028 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 1028 is a non-acid-blocked delayed action catalyst that is useful in microcellular applications requiring stronger back-end cure. It is a controlled-activity catalyst for 1,4-butanediol extended polyester and polyether systems. | |
| DABCO® 25 S | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 25 S is 25% TEDA dissolved in 1,4-butanediol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 33 LV | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 33 LV is a 33% TEDA dissolved in dipropylene glycol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 33 S | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 33 S is 33% TEDA dissolved in 1,4-butanediol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® 8154 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® 8154 is an acid-blocked delayed action catalyst that is useful in extending pot life. | |
| DABCO® DC 1 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. | |
| DABCO® DC 2 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...voir plus DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. voir moins | |
| DABCO® DMDEE | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DMDEE is an amine catalyst that is isocyanate stable. It is used in one component moisture cured applications in CASE. | |
| DABCO® EG | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® EG is 33% TEDA dissolved in ethylene glycol. Used in the synthesis of prepolymers and curing of polyurethanes. | |
| DABCO® LK 221 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® LK 221 is an organic surfactant that serves as a good emulsifier, epsecially for 1,4-BDO in polyol blends, and improves adhesion. | |
| DABCO® MB 20 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT. | |
| DABCO® NE 1070 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1070 is a low emission gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. | |
| DABCO® NE 1091 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 1091 is a highly efficient low emissive gel catalyst suitable for replacement of traditional TEDA catalysts like DABCO® 33 LV or DABCO® EG. It can be used to improve humid aging properties. | |
| DABCO® NE 300 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® NE 300 is a highly efficient low emissive blow catalyst suitable for replacement of BDMAEE catalysts. | |
| DABCO® T 12 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 12 is a dibutyltin dilaurate. Strong gel catalyst. Moderate hydrolytic stability. | |
| DABCO® T 120 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 120 is a strong gel catalyst with good hydrolytic stability. | |
| DABCO® T 131 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® T 131 is a strong gel catalyst with good hydrolytic stability which provides a more delayed action than DBTDL. | |
| Density Marker Beads | Cospheric LLC | Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and ...voir plus Density marker beads are small colored microspheres of known mass density that are used for calibrating density gradients and determining density in gradient columns. Density gradients are often used for separations and purification of cells, viruses and sub-cellular particles. Generally a set of several density marker beads covering a range of densities is used. The gradient is calibrated with beads that float at different heights within the column. When a test sample is added to the column, it drops until the point of neutral buoyancy, and the density is determined from the calibration chart. Density gradient columns can be used to measure the density of any sample. voir moins | |
| Fluorescent & Phoshorescent Microspheres | Cospheric LLC | Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. It is often advantageous to color code the part...voir plus Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. It is often advantageous to color code the particles by size to better understand which part of the process the spheres of the specific size were able to pass through, or where the contamination in the process is coming from. Polyethylene is inert to most solvents. Polyethylene microspheres are hydrophobic and need to be coated with surfactant prior to suspending in water or aqueous media. voir moins | |
| HB-132 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...voir plus HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. voir moins | |
| HB-135 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...voir plus HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. voir moins | |
| HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...voir plus HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. voir moins | |
| HB-612 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use i...voir plus HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. voir moins | |
| HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...voir plus HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. voir moins | |
| HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...voir plus HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. voir moins | |
| HL-150 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants...voir plus HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. voir moins | |
| HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...voir plus HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. voir moins | |
| HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...voir plus HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. voir moins | |
| HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...voir plus HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. voir moins | |
| Hollow Glass Microspheres | Cospheric LLC | Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microsp...voir plus Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microspheres are rigid and typically have the thickness of 10% of the diameter of the sphere. The crush strength of the hollow spheres is determined by the thickness of the walls and, as expected, the higher the sphere density the higher the crush strength. The lightweight hollow glass spheres are chemically stable, noncombustible, nonporous, and have excellent water resistance. voir moins | |
| KOSMOS® T 100 | Evonik Operations GmbH, BL Comfort & Insulation | KOSMOS® T 100 is the strongest gel catalyst particularly suitable for fast curing applications such as spray coatings and RIM. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| ORTEGOL® AB | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® AB is a silicone-based abrasion reducer; easy to blend into the system. | |
| ORTEGOL® AST 8 | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® AST 8 is a highly potent antistatic agent with no impact on physical properties. | |
| ORTEGOL® COM | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® COM is an emulsifier enhancing the miscibility between various formulation ingredients; ideal for blends of otherwise incompatible polyols. | |
| ORTEGOL® NOP | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® NOP is an emulsifier enhancing miscibility of polyester or polyether polyols with natural oil based polyols. | |
| POLYCAT® DBU | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® DBU is a strong gel catalyst that provides snap cure at ambient temperature. | |
| POLYCAT® SA 1 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 1 is an acid-free heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. | |
| POLYCAT® SA 102 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 102 is a heat activated catalyst that provides excellent back-end cure. Can provide an extended pot life. It stays liquid at low temperature. Is has higher de-blocking temperature and longer pot life time than POLYCAT® SA 1. | |
| POLYCAT® SA 2 LE | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 2 LE is a low emission heat activated catalyst that exhibits a front end delay with rapid back end-cure. | |
| POLYCAT® SA 20 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 20 is a DBT-free low emission gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. | |
| POLYCAT® SA 5 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 5 is a gelling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It is recommended to use in conjunction with DABCO® BA 100 to improve pot life time. | |
| POLYCAT® SA 8 | Evonik Operations GmbH, BL Comfort & Insulation | POLYCAT® SA 8 is a heat activated co-catalyst with an excellent front-end delay. | |
| Polyethylene Microspheres & Nanospheres | Cospheric LLC | Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. Neutrally-buoyant spherical polymer particles a...voir plus Polyethylene microspheres of high sphericity and narrowly graded particle size distribution are used in industrial and scientific applications for process control, diagnostics, and medical device technology. Neutrally-buoyant spherical polymer particles are specifically designed for suspension in fresh water, enabling flow visualization and PIV analysis of fluid flow in a device. It is often advantageous to color code the particles by size to better understand which part of the process the spheres of the specific size were able to pass through, or where the contamination in the process is coming from. Polyethylene is inert to most solvents. Polyethylene microspheres are hydrophobic and need to be coated with surfactant prior to suspending in water or aqueous media. voir moins | |
| Poly(methyl methacrylate) Spheres, Microspheres & Nanospheres | Cospheric LLC | Poly(methyl methacrylate), PMMA, or acrylic microspheres and spheres are spherical polymer beads that are a transparent thermoplastic synthesized from methyl methacrylate polymer. PMMA microbeads are known for high impact and heat resistance, and good ten...voir plus Poly(methyl methacrylate), PMMA, or acrylic microspheres and spheres are spherical polymer beads that are a transparent thermoplastic synthesized from methyl methacrylate polymer. PMMA microbeads are known for high impact and heat resistance, and good tensile and flexural strength. These strong yet lightweight polymer microspheres are often used as spacers, fillers, and reference particles for a variety of specialty applications in life sciences, medical technology, MEMS, optics and development of high performance composites. Uncoated poly(methyl methacrylate) or PMMA microspheres and spheres are often used in manufacturing of porous ceramics, self assembled microfluidic devices, and in biomedical research. Also often used as a lightweight alternative to glass microspheres. voir moins | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. voir moins | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. voir moins | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. voir moins | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. voir moins | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. voir moins | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. voir moins | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...voir plus RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. voir moins | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. voir moins | |
| Retroreflective Microspheres | Cospheric LLC | Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a p...voir plus Retroreflective Microspheres incorporate a hemispherically coated aluminum shell which provides maximum retroreflection. In bulk, these metallized glass spheres appear as a grey powder. Under an optical microscope, each individual microsphere displays a partial aluminum coating. Aluminum (Al) coatings on microspheres offer advantages in developing retroreflective surfaces for high visibility materials and applications. The hemispherical (half-shell) aluminum coating creates the mechanism for retroreflectivity as the light passes through the clear half of the glass bead and “bounces” off the reflective aluminum-coated back surface, directing the light back to the source or the viewer. Additional surface coatings (silane or fluorochemical) ensure that the spheres remain on the surface of the formulation, thereby enhancing the effect of retroreflectivity. voir moins | |
| RF95 | Guangxi Zhongchang Resin Co., Ltd. | RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters...voir plus RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters, azulene ketones and aromatic hydrocarbon. voir moins | |
| RGF100 | Guangxi Zhongchang Resin Co., Ltd. | RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon so...voir plus RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF100W | Guangxi Zhongchang Resin Co., Ltd. | RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon s...voir plus RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF90 | Guangxi Zhongchang Resin Co., Ltd. | RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solv...voir plus RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF90W | Guangxi Zhongchang Resin Co., Ltd. | RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon sol...voir plus RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RL10 | Guangxi Zhongchang Resin Co., Ltd. | RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a pr...voir plus RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| RL10W | Guangxi Zhongchang Resin Co., Ltd. | RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a p...voir plus RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...voir plus Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...voir plus Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. voir moins | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...voir plus RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...voir plus RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...voir plus RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...voir plus RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins |
