| ABP-263 | Gelest, Incorporated | Amphiphilic silicone that has the ability to form stable water-in-oil emulsions allowing formulation of a wide range of gels and creams. | |
| AKT-855 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
| AKT853 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
| AKT865 | Gelest, Incorporated | Titanate catalyst for alkoxy and oxime neutral cure RTV's. | |
| AKT867 | Gelest, Incorporated | Catalyst for silicone condensation RTV's. | |
| ALT-143 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-173 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-192 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-213 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-233 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-251 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-263 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-292 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-563 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| ALT-652 | Gelest, Incorporated | Organic compatible silicone fluid with greatly improved lubrication characteristics, higher viscosity-temperature coefficient, lower compressibility and decreased oxidation stability when compared to polydimethylsiloxanes. | |
| AMS-132 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
| AMS-152 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
| AMS-162 | Gelest, Incorporated | Aminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
| AMS-233 | Gelest, Incorporated | Aminoethylaminopropylmethylsiloxane-dimethylsiloxane copolymer. | |
| AMS-242 | Gelest, Incorporated | Aminoethylaminoisobutylmethylsiloxane-dimethylsiloxane copolymer. | |
| AQUAPHOBE™ CF | Gelest, Incorporated | Chlorine terminated polyfluoroalkylmethylsiloxane oligomer. The chlorines react with hydroxy and silanol groups of glass, siliceous surfaces and other metal oxide surfaces to form a chemically bound, low surface energy, fluorinated silicone surface. | |
| AQUAPHOBE™ CM | Gelest, Incorporated | Chlorine terminated polydimethylsiloxane oligomer. The chlorines react with hydroxy and silanol groups of glass, siliceous surfaces and other metal oxide surfaces to form a chemically bound polydimethylsiloxane "siliconized" surface. | |
| ATM-1112 | Gelest, Incorporated | Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer. | |
| ATM-1322 | Gelest, Incorporated | Aminoethylaminopropylmethoxysiloxane-dimethylsiloxane copolymer. | |
| ATM-1322M50 | Gelest, Incorporated | Reactive silicone emulsion. | |
| BENAQUA® 4000 | Elementis | BENAQUA® 4000 is an easily dispersible powder designed for lower-gloss and matt latex paints, textured and high-build coatings and water-borne adhesives. It is especially useful in systems that are diluted with water prior to use. | |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | |
| BENTONE® 27 | Elementis | BENTONE® 27 is an organic solventborne derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | |
| BENTONE® 34 | Elementis | BENTONE® 34 is an organic solventborne derivative of a special smectite designed for low to intermediate polarity organic systems. | |
| BENTONE® 38 | Elementis | BENTONE® 38 is an organic solventborne derivative of a hectorite clay. This highly efficient rheological additive is designed for low to intermediate polarity organic systems. | |
| BENTONE® 57 | Elementis | BENTONE® 57 is an organic solventborne derivative of bentonite clay. This highly efficient and cost-effective rheological additive is designed for high-polarity organic systems. | |
| BENTONE® CT | Elementis | BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier tha...voir plus BENTONE® CT rheological additive is a natural untreated, hectorite clay of a defined particle size, suitable for thickening and flow control of waterborne paint and aqueous coating systems. This clay based thickener is cost effective rheology modifier that prevents hard settling and builds thixotropy. voir moins | |
| BENTONE® DE | Elementis | BENTONE® DE is a highly beneficiated, waterborne hyperdispersible powdered hectorite clay. | |
| BENTONE® DY CE | Elementis | BENTONE® DY CE is an organically modified powdered clay product specially designed for waterborne systems; primarily interior, decorative latex paints. | |
| BENTONE® EW NA | Elementis | BENTONE® EW NA is a highly beneficiated, easily dispersible waterborne powdered smectite clay. | |
| BENTONE® GS | Elementis | BENTONE® GS is a beneficiated, waterborne powdered smectite clay specifically developed for construction applications. | |
| BENTONE® HD | Elementis | BENTONE® HD is a highly beneficiated hyperdispersible powdered waterborne hectorite clay. | |
| BENTONE® LT | Elementis | BENTONE® LT is an organically modified powdered clay additive designed for water-borne systems, primarily latex paints. | |
| BENTONE® NP-10 | Elementis | BENTONE® NP-10 is a solventborne, high- efficiency, easy-to-use organoclay. It is an ideal rheological additive for inks formulated with petroleum/vegetable oils and low polarity solvents. | |
| BENTONE® OC | Elementis | BENTONE® OC is a waterborne rheological additve based untreated hectorite clay with a defined particle size. This rheology modifieris suitable for thickening and control of workability and flow of mineral-based aqueous construction systems. | |
| BENTONE SD® 1 | Elementis | BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the pa...voir plus BENTONE SD® 1 is an organic solventborne derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium- polarity solvents.BENTONE SD® 1 can be added at any point in the paint manufacturing process and can be used for post-correction. It provides viscosity increase, reduces sagging of coatings on vertical surfaces and prevents settling of pigments and fillers. voir moins | |
| BENTONE SD® 2 | Elementis | BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvent...voir plus BENTONE SD® 2 is an organic solventborne derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols, including polar systems with some aromatic solvents. BENTONE SD® 2 is easy to incorporate and can be added dry to the pigment grinding process without requiring the use of a chemical activator or the preparation of a pregel. It may be used for post correction. voir moins | |
| BENTONE SD® 3 | Elementis | BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not requi...voir plus BENTONE SD® 3 is an organic solventborne derivative of a hectorite clay. It is highly efficient and designed for use in coating systems with a wide range of solvent polarities. This product must be dispersed in the pigment milling stage. It does not require pre-gelling or a chemical activator. Post correction with BENTONE SD® 3 is not recommended. It also has rheological additive provides stable viscosity, controls sag and suspends pigments. voir moins | |
| CMS-222 | Gelest, Incorporated | (Carbinol functional) methylsiloxane-dimethylsiloxane copolymer. | |
| CMS-626 | Gelest, Incorporated | (Carbinol functional) methylsiloxane-dimethylsiloxane copolymer. | |
| CMS-832 | Gelest, Incorporated | (Hydroxyalkyl functional) methylsiloxane-(3,4-diethoxyphenylpropyl) methylsiloxane-dimethylsiloxane terpolymer. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should...voir plus DAPRO® DF 1492 is a highly effective silicone free waterborne bubble breaker. This product is used principally to reduce or eliminate existing foam prior to fill-out and as a press site defoamer in flexographic and gravure printing applications. It should be used whenever an immediate short-term effect is needed. All non-volatile components of DAPRO® DF 1492 Foam Suppressor are FDA compliant under CFR Title 21 175.300. voir moins | |
| DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA com...voir plus DAPRO® DF 1760 is a highly effective, silicone free, long lasting waterborne bubble breaker. This product remains effective after extended storage of the system in which it is used. All non-volatile components of DAPRO® DF 1760 Foam Suppressor are FDA compliant under CFR Title 21 175.105; 175.300; 176.170 and 176.180. voir moins | |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 is a bubble releasing, anti-foaming agent for variety of solvent-borne coatings. Applications include alkyd enamels, PUR, epoxies, and acrylics. | |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | |
| DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 is a silicone free liquid defoamer, economical in use, for universal waterborne applications. The product shows very good long-term efficiency. | |
| DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 is a liquid defoamer, economical in use, for universal waterborne applications The product shows very good long-term efficiency. | |
| DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 is a defoamer for waterborne systems with very good emulsifying properties. It is specially recommended for use in grinding pastes, emulsion paints and inks. | |
| DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 is a silicone free liquid defoamer for use in waterborne systems. This product has outstanding emulsifying properties in water. | |
| DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 is a silicone free defoamer for waterborne systems. This product is very easily emulsifiable in water. | |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing step...voir plus DAPRO® DF 880 is a silicone free air release additive that can be used to prevent foam formation in waterborne coating systems. This product provides rapid bubble breaking in applied wet films and also prevents the entrapment of air during processing steps such as grinding, stirring and pumping. voir moins | |
| DAPRO® DF 975 | Elementis | DAPRO® DF 975 is a silicone-free waterborne defoamer based on a dispersion of olefinic solids. This product imparts excellent foam control properties in architectural, industrial paints and coatings and inks. | |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 is an effective solventborne auxiliary for reducing the resistance of paints that are sprayed electrostatically. | |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 is a low odour waterborne coalescing agent that has been designed for dispersions, dispersion paints and plasters. | |
| DAPRO® FX 513 | Elementis | DAPRO® FX 513 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC paint systems. This product shows excellent film formation, scrub resistance, improved gloss and open-time. | |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...voir plus DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. voir moins | |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...voir plus DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. voir moins | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...voir plus DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. voir moins | |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | |
| DBE-224 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-621 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-712 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-814 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-821 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-C25 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
| DBE-U12 | Gelest, Incorporated | Acryloxy terminated ethyleneoxide dimethylsiloxane-ethyleneoxide ABA block copolymer. | |
| DBE-U22 | Gelest, Incorporated | Acryloxy terminated ethyleneoxide dimethylsiloxane-ethyleneoxide ABA block copolymer. | |
| DBL-C31 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
| DBP-534 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBP-732 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBP-C22 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
| DES-T03 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T11 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T12 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T15 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DES-T23 | Gelest, Incorporated | Polydiethylsiloxane that offers improved metal-metal lubrication and low temperature properties when compared to polydimethylsiloxanes. | |
| DMS-A11 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A12 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A15 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A21 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A211 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
| DMS-A214 | Gelest, Incorporated | N-ethylaminoisobutyl terminated polydimethylsiloxane. | |
| DMS-A31 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A32 | Gelest, Incorporated | Aminopropyl terminated polydimethylsiloxane. | |
| DMS-A32R | Gelest, Incorporated | Reduced volatility grade aminopropyl terminated polydimethylsiloxane. | |
| DMS-B12 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
| DMS-B25 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
| DMS-B31 | Gelest, Incorporated | (Carboxyalkyl) terminated polydimethylsiloxane. | |
| DMS-C15 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
| DMS-C16 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
| DMS-C21 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. | |
| DMS-C23 | Gelest, Incorporated | Carbinol (hydroxyl) terminated polydimethylsiloxane. |
