| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...voir plus 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF SE, Intermediates Division | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxi...voir plus 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. It can also be used as a solvent in polyester film seaming. voir moins | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| Andisil 1100 Silane | AB Specialty Silicones | Andisil 1100 Silane is an amino silane coupling agent. It is used to provide a bond between inorganic substrates and organic polymers. Andisil 1100 Silane is recommended for fiberglass reinforced composites. | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in R...voir plus Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. voir moins | |
| Andisil 1120 Silane | AB Specialty Silicones | Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane ...voir plus Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, and more. voir moins | |
| Andisil 1122 Silane | AB Specialty Silicones | Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, poly...voir plus Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. voir moins | |
| Andisil 1130 Silane | AB Specialty Silicones | Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers su...voir plus Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. voir moins | |
| Andisil 1170 Silane | AB Specialty Silicones | Andisil 1170 Silane is a bis(trimethoxysilylpropyl)amine amino silane. It is used as an adhesive and sealant. | |
| Andisil 1289 Silane | AB Specialty Silicones | Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent fo...voir plus Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent for rubbers. voir moins | |
| Andisil 151 Silane | AB Specialty Silicones | Andisil 151 Silane is a colorless, transparent liquid vinyl silane. It is a coupling agent in filled polymer systems. Andisil 151 Silane can also be used as a finish for glass or a binder additive in glass reinforced resins. | |
| Andisil 171 Silane | AB Specialty Silicones | Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhe...voir plus Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhesion between glass, mineral, and metal surfaces and provides elongation, flexibility, and spreading. voir moins | |
| Andisil 172 Silane | AB Specialty Silicones | Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion...voir plus Andisil 172 Silane is a colorless or light yellow liquid vinyl silane. It is used as a coupling agent and is easily dissolved in water. Andisil 172 Silane is mainly used in mineral-filled EPM and EPDM cables. Andisil 172 Silane is also used as an adhesion promoter in primers and coatings. voir moins | |
| Andisil 174 Silane | AB Specialty Silicones | Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinkin...voir plus Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinking agent, and blend additive. voir moins | |
| Andisil 187 Silane | AB Specialty Silicones | Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coating...voir plus Andisil 187 Silane is an epoxy functional silane coupling agent. It is used for unsaturated polyester-fiberglass composites and for polysulfide/polyurethane caulks & sealants. Andisil 187 Silane can be used in waterborne acrylic sealants and epoxy coatings. voir moins | |
| Andisil 189 Silane | AB Specialty Silicones | Andisil 189 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 189 Silane improves adhesion to glass and metal surfaces. | |
| Andisil 1891 Silane | AB Specialty Silicones | Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as...voir plus Andisil 1891 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 1891 Silane can be chemically bonded with materials such as silica, clay, mica, and talc. voir moins | |
| Andisil 2100 Silane | AB Specialty Silicones | Andisil 2100 Silane is an aminopropylmethyldiethoxysilane coupling agent. This product is mainly used for foundry resins. | |
| Andisil 2120 Silane | AB Specialty Silicones | Andisil 2120 Silane is a diamino-functional silane that provides elongation, flexibility, and spreading at the interface as a coupling agent. It is used to improve adhesion between glass, mineral, and metal surface and aminoreactive resins. | |
| Andisil 6041 Silane | AB Specialty Silicones | Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be us...voir plus Andisil 6041 Silane is a glycidoxy (epoxy) -functional silane coupling agent. It can be used for unsaturated polyester-fiberglass composites, polysulfide & polyurethane caulks and sealants, and glass roving size-binders. Andisil 6041 Silane can also be used in waterborne systems and is suitable for many polymers. voir moins | |
| Andisil HMDZ | AB Specialty Silicones | Andisil HMDZ, chemical name hexamethyldisilazane, is a clear, colorless liquid. It can be used as a hydrophobing agent for inorganic fillers. Andisil HMDZ can be used as a protecting agent for OH and SH functionality. | |
| Andisil MOH 1,000 | AB Specialty Silicones | Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone ro...voir plus Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 10,000 | AB Specialty Silicones | Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone...voir plus Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 50,000 | AB Specialty Silicones | Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone...voir plus Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOS | AB Specialty Silicones | Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like met...voir plus Andisil MOS is a colorless transparent liquid with composition methyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MOS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil MT 9010 | AB Specialty Silicones | Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil MT 9010 is a colorless transparent liquid with composition 90% MOS/10% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil MT 9010 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil OH 1,000 | AB Specialty Silicones | Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 14,000 | AB Specialty Silicones | Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 2,000 | AB Specialty Silicones | Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 20,000 | AB Specialty Silicones | Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 30 | AB Specialty Silicones | Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcaniz...voir plus Andisil OH 30 is a clear, slightly hazy colorless silanol liquid (6%, 30 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 30 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 300,000 | AB Specialty Silicones | Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone roo...voir plus Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 3,500 | AB Specialty Silicones | Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 40 | AB Specialty Silicones | Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcan...voir plus Andisil OH 40 is a clear, slightly hazy colorless silanol liquid (3.5%, 40 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 40 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 4,000 | AB Specialty Silicones | Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 50,000 | AB Specialty Silicones | Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 6,000 | AB Specialty Silicones | Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temp...voir plus Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 70 | AB Specialty Silicones | Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulca...voir plus Andisil OH 70 is a clear, slightly hazy colorless silanol liquid (1.25%, 70 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 70 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. It can be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formula. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 750 | AB Specialty Silicones | Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperatur...voir plus Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 80,000 | AB Specialty Silicones | Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room t...voir plus Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil POS | AB Specialty Silicones | Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like met...voir plus Andisil POS is a colorless transparent liquid with composition phenyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil POS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil TT 5050 | AB Specialty Silicones | Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive sub...voir plus Andisil TT 5050 is a colorless transparent liquid with composition tetrakis(MEKO)silane in toluene. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil TT 5050 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VOS | AB Specialty Silicones | Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like meta...voir plus Andisil VOS is a colorless transparent liquid with composition vinyl tris(MEKO)silane. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VOS sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VT 6535 | AB Specialty Silicones | Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil VT 6535 is a yellowish to brownish liquid with composition 65% VOS/35% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 6535 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Andisil VT 8218 | AB Specialty Silicones | Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like met...voir plus Andisil VT 8218 is a yellowish to brownish liquid with composition 82% VOS/18% TOS. It is an andisil oxime raw material used for neutral condensation curing silicone sealants. Andisil VT 8218 sealants can be used on corrosion sensitive substrates like metals or marble. voir moins | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...voir plus Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. voir moins | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...voir plus Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate voir moins | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...voir plus Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...voir plus Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. voir moins | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...voir plus Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...voir plus Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. voir moins | |
| Densil® C40 Antimicrobial | Arxada | Densil® C40 Antimicrobial is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...voir plus Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). voir moins | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...voir plus Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). voir moins | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...voir plus Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . voir moins | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...voir plus Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. voir moins | |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...voir plus Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. voir moins | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...voir plus Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. voir moins | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Formic acid | BASF SE, Intermediates Division | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...voir plus Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating voir moins | |
| Imidazole | BASF SE, Intermediates Division | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...voir plus Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. voir moins | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...voir plus Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...voir plus Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins |
