CN104A75 | Sartomer Americas | CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphen...voir plus CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Suggested applications for this include adhesives, coatings, electronics and inks. voir moins | |
CN120Z | Sartomer Americas | CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, ana...voir plus CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. voir moins | |
CN307 | Sartomer Americas | CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated int...voir plus CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated into peroxide cured natural and synthetic rubber systems, where it improves mechanical and performance properties. voir moins | |
CN9021 | Sartomer Americas | CN9021 is a clear liquid acrylic ester. This product has been developed for UV/EB cured laminating and pressure-sensitive adhesives. CN9021 has good moisture resistance and high elongation. It also imparts excellent adhesion and flexibility to laminating ...voir plus CN9021 is a clear liquid acrylic ester. This product has been developed for UV/EB cured laminating and pressure-sensitive adhesives. CN9021 has good moisture resistance and high elongation. It also imparts excellent adhesion and flexibility to laminating and pressure-sensitive adhesive formulations, especially those for glass. voir moins | |
CN9070 | Sartomer Americas | CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg...voir plus CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg, low crosslink density, and will be flexible. voir moins | |
CN9302 | Sartomer Americas | CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture c...voir plus CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture cure of shadowed areas for enhanced coating performance. voir moins | |
LM5301 | Sartomer Americas | LM5301 is a propoxylated glyceryl triacrylate developed to enable the formulator to produce inks and varnishes that comply with food packaging regulations. | |
LM5302 | Sartomer Americas | LM5302 is an ethoxylated trimethylolpropane acrylate developed to enable the formulator to produce inks and varnishes that comply with food packaging regulations. | |
LM5401 | Sartomer Americas | LM5401 is a high purity alkoxylated tetrafunctional acrylate developed to enable the formulator to produce inks and varnishes that comply with food packaging regulations. | |
LM5601 | Sartomer Americas | LM5601 is a dipentaerythritol penta acrylate (DPHA) developed to enable the formulator to produce inks and varnishes that comply with food packaging regulations. | |
N3D-E180 | Sartomer Americas | N3D-E180 is a urethane acrylate specifically designed for elastomeric recovery with a low to moderate hardness. With its high molecular weight design this urethane oligomer lends itself to TPU-like properties when properly diluted to your viscosity specif...voir plus N3D-E180 is a urethane acrylate specifically designed for elastomeric recovery with a low to moderate hardness. With its high molecular weight design this urethane oligomer lends itself to TPU-like properties when properly diluted to your viscosity specifications. voir moins | |
N3D-F230 | Sartomer Americas | N3D-F230 is a chain extended urethane acrylate specifically designed to snap back in place when formulated into a polyethyene, or polypropylene like materiail. At a moderate viscosity, addition of 40% of the monomer of your choice brings this into a print...voir plus N3D-F230 is a chain extended urethane acrylate specifically designed to snap back in place when formulated into a polyethyene, or polypropylene like materiail. At a moderate viscosity, addition of 40% of the monomer of your choice brings this into a printable viscosity range. voir moins | |
N3D-I250 | Sartomer Americas | N3D-I250 is a polycarbonate based urethane acrylate specifically designed with a particular modulus range for improved mechanical durability. It’s polycarbonate backbone provides rigidity while an increased MW provides low volumetric shrinkage and thermop...voir plus N3D-I250 is a polycarbonate based urethane acrylate specifically designed with a particular modulus range for improved mechanical durability. It’s polycarbonate backbone provides rigidity while an increased MW provides low volumetric shrinkage and thermoplastic-like material trends. voir moins | |
N3D-P110 | Sartomer Americas | N3D-P110 has been specifically designed for bottom-up printing systems incorporating non-swelling components for printing ease. N3D-P110 produces transparent parts at high resolution making it an exceptional choice for your prototyping needs. | |
N3D-P2120 | Sartomer Americas | N3D-P2120 is a resin system specifically designed for formulators targeting high quality prototyping. This particular resin system features novel (meth)acrylate oligomers that provide targeted cure speed and physical durability while maintaining a low eno...voir plus N3D-P2120 is a resin system specifically designed for formulators targeting high quality prototyping. This particular resin system features novel (meth)acrylate oligomers that provide targeted cure speed and physical durability while maintaining a low enough viscosity to ease handling and mixing. voir moins | |
N3D-P220 | Sartomer Americas | N3D-P220 is a urethane acrylate specifically designed for durable and robust part performance. This particular base resin features a low molecular weight urethane dimethacrylate that can be tailored to your printers light source. | |
PRO13944 | Sartomer Americas | PRO13944 is a high molecular weight, difunctional polyether urethane-acrylate. On cure, it can undergo a phase separation process to improve toughness of some formulations. | |
PRO14072 | Sartomer Americas | PRO14072 is a low viscosity (meth)acrylate providing low residual ash content and high reactivity for the printing of ceramic by SLA/DLP. PRO14072 offers high green strength and flexibility in the development of technical ceramic formulations. | |
PRO14213 | Sartomer Americas | PRO14213 is a high performance compound expected to increase the mechanical properties of your tough and rigid 3D printed resins. By combining a high young modulus with a good elongation, this new oligomer will open up the range of possibilities for all y...voir plus PRO14213 is a high performance compound expected to increase the mechanical properties of your tough and rigid 3D printed resins. By combining a high young modulus with a good elongation, this new oligomer will open up the range of possibilities for all your ABS-like applications. voir moins |