| 2-Mercaptobenzothiazole | Hainan Zhongxin Chemical Co., Ltd. | 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as...voir plus 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. voir moins | |
| 2-Mercaptobenzothiazole (Refined) | Hainan Zhongxin Chemical Co., Ltd. | 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelera...voir plus 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 2-Mercaptobenzothiazole is a refined version of 2-Mercaptobenzothiazole with a slightly higher initial M.P. count of 172.0 minimum oC. voir moins | |
| 2-(Morpholinothio)benzothiazole | Hainan Zhongxin Chemical Co., Ltd. | 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an ...voir plus 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an accelerator in the production rubbers and adhesives. voir moins | |
| 4,4'-dithiodimorpholine | Hainan Zhongxin Chemical Co., Ltd. | 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...voir plus 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. voir moins | |
| B-Tough™ A1 | Cargill Industrial Specialties | B-Tough™ A1 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ A2 | Cargill Industrial Specialties | B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low ...voir plus B-Tough™ A2 is an epoxy functional toughening agent for structural resins and adhesives. It brings excellent impact resistance, stability, low moisture diffusion, and easy handling. It is recommended for use in liquid and/or solid type epoxy systems (low polarity grade). voir moins | |
| B-Tough™ A3 | Cargill Industrial Specialties | B-Tough™ A3 is an epoxy functionalised toughening agent for structural resins and adhesives. It brings excellent stability, low moisture diffusion, and easy handling. | |
| B-Tough™ C2r | Cargill Industrial Specialties | B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface ma...voir plus B-Tough™ C2r is a VOC free epoxy functional toughening agent which allows formulating zero VOC epoxy coatings for e.g. indoor floor coatings. This liquid and easy to use toughening agent provides excellent impact and crack resistance preventing surface marring for optimal protection. Furthermore, B-Tough™ C2r offers improved flexibility whilst maintaining hardness and enhanced durability to extend product lifetime. voir moins | |
| BLACK PEARLS® 4040 | Cabot Corporation - Additives | BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and si...voir plus BLACK PEARLS® 4040 is a specialty carbon black for long-term ultraviolet and weatherability protection, good surface smoothness and dispersion performance. This product is well suited for use in a range of film and sheet applications, such as mulch and silage film, irrigation pipe and tape, and general purpose film and sheet. voir moins | |
| CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...voir plus CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. voir moins | |
| CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...voir plus CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. voir moins | |
| CAB-O-SIL® LM150 | Cabot Corporation - Additives | CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use f...voir plus CAB-O-SIL® LM150 is a low surface area fumed silica that imparts a moderate increase in viscosity, and reinforcement in liquid and polymer systems. It provides balance of dispersability, thixotropy, and reinforcement. This product is well suited for use for thixotropy in silicone sealants and for reinforcement in silicone rubbers. voir moins | |
| CAB-O-SIL® M-5 | Cabot Corporation - Additives | CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile stren...voir plus CAB-O-SIL® M-5 is a untreated medium surface fumed silica that provides thickening, thixotrophic, and anti-settling behavior in liquid systems. It is most efficient in non-polar to medium polarity systems, and provides increases in hardness, tensile strength and elongation. It can be used for reinforcement of silicone and organic rubbers. This product is well suited for use in coatings, adhesives, and other liquid systems. voir moins | |
| CAB-O-SIL® TS530 | Cabot Corporation - Additives | CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in m...voir plus CAB-O-SIL® TS530 is a high-purity silica that has been treated with hexamethyldisilazane to render the silica hydrophobic. It offers good rheological control, sag resistance, anti-settling, and improved dispersion. This product is well suited for use in medium-to-high polarity inks, coatings, and adhesive applications. voir moins | |
| CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...voir plus CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. voir moins | |
| CAB-O-SIL® TS622 | Cabot Corporation - Additives | CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporat...voir plus CAB-O-SIL® TS622 is a medium surface area fumed silica that has been surface modified with dimethyldichlorosilane. This product is specially designed for use as a reinforcing agent for RTV-1 silicone sealants, where it provides faster wet-in or incorporation, better dispersion, and good sealant surface smoothness and appearance. voir moins | |
| CAB-O-SIL® TS720 | Cabot Corporation - Additives | CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behav...voir plus CAB-O-SIL® TS720 is a medium surface area fumed silica which has been surface modified with polydimethylsiloxane. It provides thickening efficiency, sag resistance or high film build, anti-settling of pigments and fillers, shear-thinning rheological behavior, and stable rheological performance over time. This product is well suited for rheology control in adhesives, composites, and coatings. voir moins | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...voir plus CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Densil® C40 Antimicrobial | Arxada | Densil® C40 Antimicrobial is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the syn...voir plus Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the synthesis of polymers. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lonzamon™ AATMP | Arxada | Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers ...voir plus Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers a broad versatility for various application fields. At the active methylane group, Lonzamon™ AATMP has a reaction with melamine, aldehyde, isocyanates, and diazonium salts. At the carbonyl group, it has a chelation reaction and an enamine formation. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MEKO （Methyl Ethyl Ketoxime） | Hainan Zhongxin Chemical Co., Ltd. | MEKO （Methyl Ethyl Ketoxime） synonymous with 2-Butanone Oxime, is a clear, colorless liquid that is 99.5% pure. It is primarily used as an anti-skinning agent in paint. It has additional uses in the production of silicone adhesive products. | |
| N-Isopropyl-N'-phenyl-1,4-phenylenediamine | Hainan Zhongxin Chemical Co., Ltd. | N-Isopropyl-N'-phenyl-1,4-phenylenediamine IPPD (4010NA) is an antioxidant used in the production of natural rubber and many kinds of synthetic rubbers and sealants. It comes as dark brown to purple brown granules and can be used in the prevention of ther...voir plus N-Isopropyl-N'-phenyl-1,4-phenylenediamine IPPD (4010NA) is an antioxidant used in the production of natural rubber and many kinds of synthetic rubbers and sealants. It comes as dark brown to purple brown granules and can be used in the prevention of thermal deterioration on products such as NBR. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| Omacide® IPBC 100 | Arxada | Omacide® IPBC 100 Fungicide is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Omacide™ IPBC 20 TX Fungicide | Arxada | Omacide™ IPBC 20 TX Fungicide is a broad spectrum liquid fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Omacide® IPBC 30 Fungicide | Arxada | Omacide® IPBC 30 Fungicide imparts dry film protection against fungal growth when formulated in exterior paints and coatings, wood stains, adhesives, caulks, sealants, paper coatings, textiles, and plastics. | |
| Omacide® IPBC 40 Fungicide | Arxada | Omacide® IPBC 40 Fungicide is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. Omacide® IPBC 40 Fungicide also provides excellent fungal control when use...voir plus Omacide® IPBC 40 Fungicide is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. Omacide® IPBC 40 Fungicide also provides excellent fungal control when used in adhesives, caulks, and sealants. voir moins | |
| Poly(1,2-dihydro-2,2,4-trimethylquinoline) | Hainan Zhongxin Chemical Co., Ltd. | Poly(1,2-dihydro-2,2,4-trimethylquinoline), synonymous with RD, Tlectol TMQ, Vulkanox HS and Accinox TQ, is amber to brown granules and is primarily used as an antioxidant in rubbers and adhesives. It can impart heat, oxygen and fatigue resistance to most...voir plus Poly(1,2-dihydro-2,2,4-trimethylquinoline), synonymous with RD, Tlectol TMQ, Vulkanox HS and Accinox TQ, is amber to brown granules and is primarily used as an antioxidant in rubbers and adhesives. It can impart heat, oxygen and fatigue resistance to most products as well as a stronger inhibitory effect for metal catalytic oxidation. It is widely used in the manufacture of tires, motorcycles births, bicycles births, rubber, plastic, adhesive tape, wires, cables and other rubber products. voir moins | |
| Priamine™ 1071 | Cargill Industrial Specialties | Priamine™ 1071 is an amine functional building block that lends itself to use as a curative in epoxy systems for marine and off-shore coatings, heavy-duty industrial coatings, adhesives, and protective coatings for concrete flooring. | |
| Priamine 1073 | Cargill Industrial Specialties | Priamine 1073 is a low viscous dimer diamine building block for use in polyamides offering high flexibility, moisture repellency and adhesion to plastic. | |
| Priamine™ 1074 - Dimer Diamine | Cargill Industrial Specialties | Priamine™ 1074 is a low viscous dimer diamine building block for use in polyamides and polyurethane coatings and adhesives. It offers high flexibility, moisture repellency and adhesion. | |
| Priamine™ 1075 | Cargill Industrial Specialties | Priamine™ 1075 is for high molecular weight polyamides for high-end applications. This dimer diamine grade has a high purity, high difunctionality and low color. | |
| Priplast™ 1837 | Cargill Industrial Specialties | Priplast™ 1837 is a di-functional polyester polyol for high-performing PU adhesives, sealants, and elastomers. It provides strong hydrophobicity and high flexibility also at very low temperatures for soft elastomers and adhesives. It brings good compatibi...voir plus Priplast™ 1837 is a di-functional polyester polyol for high-performing PU adhesives, sealants, and elastomers. It provides strong hydrophobicity and high flexibility also at very low temperatures for soft elastomers and adhesives. It brings good compatibility to low-polar components. In PU systems this polyol brings good adhesion to a variety of substrates and is therefore suitable for lightweight, laminate, and construction applications. voir moins | |
| Priplast 1838 | Cargill Industrial Specialties | Priplast 1838 is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plasti...voir plus Priplast 1838 is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plastics. voir moins | |
| Priplast™ 3162 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3162 is a semi crystalline polyester polyol building block for use in polyurethane dispersions. It offers good surface hardness combined with flexibility and good adhesion and offers excellent wetting of substrates. | |
| Priplast™ 3172 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3172 is a semi crystalline polyester polyol building block for use in polyurethane dispersions for very flexible substrates and reactive hotmelt polyurethane adhesives. It offers superior hydrolytic resistance and mechanical properties. | |
| Priplast 3186 | Cargill Industrial Specialties | Priplast 3186 is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. | |
| Priplast 3187 | Cargill Industrial Specialties | Priplast 3187 is a dimer fatty acid based polyester polyols building block for PU adhesives, sealants and elastomers; provides high flexibility at very low temperatures, and good compatibility to low polar components. | |
| Priplast™ 3190 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3190 is a semi crystalline polyester polyol building block for use in polyurethane coatings and adhesives. It offers good compatibility with polyether and polyester polyols. | |
| Priplast™ 3192 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3192 is a semi crystalline polyester polyol building block for use in polyurethane dispersions for use in both rigid and flexible substrates. It offers superior hydrolytic resistance and mechanical properties. | |
| Priplast 3196 | Cargill Industrial Specialties | Priplast 3196 is a diimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatibility for polymer blends. Possible use in soft touch applications...voir plus Priplast 3196 is a diimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatibility for polymer blends. Possible use in soft touch applications. voir moins | |
| Priplast 3197 | Cargill Industrial Specialties | Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low pola...voir plus Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low polar components. voir moins | |
| Priplast™ 3237 | Cargill Industrial Specialties | Priplast™ 3237 provides low-viscosity liquid polyol and the proven flexibility of dimer-based technology. It can be used alone or as a co-polyol in PU resin applications, such as high solids 2K adhesive sealants, elastomers and coatings, to enhance proper...voir plus Priplast™ 3237 provides low-viscosity liquid polyol and the proven flexibility of dimer-based technology. It can be used alone or as a co-polyol in PU resin applications, such as high solids 2K adhesive sealants, elastomers and coatings, to enhance properties like chemical resistance and hydrophobicity. voir moins | |
| Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) | Cargill Industrial Specialties | Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and tempe...voir plus Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. voir moins | |
| Priplast™ 3294 | Cargill Industrial Specialties | Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with ...voir plus Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with a molecular weight of 2000. voir moins | |
| Pripol 1006 | Cargill Industrial Specialties | Pripol 1006 is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good color, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemi...voir plus Pripol 1006 is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good color, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. voir moins | |
| PRIPOL™ 1009 | Cargill Industrial Specialties | High purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility, thermo-oxidative stability and...voir plus High purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. voir moins | |
| Pripol 1010 VEG | Cargill Industrial Specialties | Pripol 1010 VEG is a lower viscosity dimer acid that provides your polyester and polyamide coatings with good color, water repellency and flexibility. It is also perfect for use in adhesives, engineering plastics and elastomers. Other benefits include the...voir plus Pripol 1010 VEG is a lower viscosity dimer acid that provides your polyester and polyamide coatings with good color, water repellency and flexibility. It is also perfect for use in adhesives, engineering plastics and elastomers. Other benefits include thermo-oxidative stability and excellent hydrolysis and chemical resistance. Pripol 1010 VEG is a high purity, di-functional, distilled and hydrogenated dimer acid building block. voir moins | |
| Pripol™ 1012 - Dimer Acid (Distilled) | Cargill Industrial Specialties | Pripol™ 1012 is a distilled dimer acid building block for use in polyester, polyamide and epoxy systems. It offers gives high toughness to polymers due to its high purity. | |
| Pripol™ 1013 - Dimer Acid (Distilled) | Cargill Industrial Specialties | Pripol™ 1013 is a distilled dimer acid building block for use in polyester, polyamide and epoxy systems. It offers flexibility and allows for higher molecular weight resins. | |
| Pripol™ 1017 - Dimer Acid | Cargill Industrial Specialties | Pripol™ 1017 is a dimer acid building block for use in polyester, polyamide and epoxy systems. It offers flexibility, pigment wetting and compatibility. | |
| Pripol™ 1022 VEG - Dimer Acid | Cargill Industrial Specialties | Pripol™ 1022 VEG is a dimer acid building block for use in polyester, polyamide and epoxy systems. It has low viscosity and offers flexibility, pigment wetting and compatibility. | |
| Pripol™ 1025 | Cargill Industrial Specialties | Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resist...voir plus Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. voir moins | |
| Pripol™ 1040 | Cargill Industrial Specialties | Pripol™ 1040 is a trimer acid building block for polyamide and epoxy modification. It is used for resin modification that brings extreme water repellency, corrosion inhibition, improved flexibility, hydrolytic stability, good flow and wetting properties, ...voir plus Pripol™ 1040 is a trimer acid building block for polyamide and epoxy modification. It is used for resin modification that brings extreme water repellency, corrosion inhibition, improved flexibility, hydrolytic stability, good flow and wetting properties, as well as good compatibility with other low polarity materials. This product is used for adhesives & sealants, graphic arts & inks, marine & protective coatings, automotive coatings, and industrial coatings applications. voir moins | |
| Pripol 2030 Dimerdiol | Cargill Industrial Specialties | Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical re...voir plus Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical resistance. voir moins | |
| Pripol™ 2033 - Polyester Polyol (Amorphous) | Cargill Industrial Specialties | Pripol™ 2033 is a fully amorphous dimer diol for polyurethanes and polyesters. It offers extremely high chemical and hydrolysis resistance. | |
| Pripol™ 2043 | Cargill Industrial Specialties | Pripol™ 2043 is a 100% bio-based dimer diol with increased functionality (f.: 2.2) for adhesives with improved crosslinking and adhesion, particularly on PA, steel, and aluminum. In addition, the tensile strength of the adhesive increases with limited eff...voir plus Pripol™ 2043 is a 100% bio-based dimer diol with increased functionality (f.: 2.2) for adhesives with improved crosslinking and adhesion, particularly on PA, steel, and aluminum. In addition, the tensile strength of the adhesive increases with limited effect on elongation. voir moins | |
| Prisorine 3501 | Cargill Industrial Specialties | Prisorine 3501 s a liquid, long-chain hydrocarbon with excellent color and thermo-oxidative stability for automotive and industrial coatings. | |
| Propylene Carbonate | Linyi Lixing Chemical Co., Ltd. | Propylene Carbonate is a clear transparent liquid. This product finds application as an additive in paint strippers and as a setting agent in chemical grouting to control gel time. | |
| Proxel™ AQ Preservative | Arxada | Proxel™ AQ Preservative is a zero VOC, broad spectrum biocide for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. | |
| Proxel™ BC Preservative | Arxada | Proxel BC is an antibacterial/antifungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous mineral slurries, dyes & inks, household cleaning products, and building materials such as spackle and tape join...voir plus Proxel BC is an antibacterial/antifungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous mineral slurries, dyes & inks, household cleaning products, and building materials such as spackle and tape joint compound. voir moins | |
| Proxel™ BD20 Preservative | Arxada | Proxel™ BD20 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints, water based adhesives, casein and rosin dispersions, textile spin-finish solutions, pesticide formulatio...voir plus Proxel™ BD20 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints, water based adhesives, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations, aqueous slurries, titanium dioxide slurries, tape joint compounds, leather processing solutions, and for the preservation of fresh animal hides and skins. voir moins | |
| Proxel® BN Preservative | Arxada | Proxel® BN Preservative is a solvent-free, zero VOC, broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is effective in polymer emulsions, paints, adhesives and pigment sl...voir plus Proxel® BN Preservative is a solvent-free, zero VOC, broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is effective in polymer emulsions, paints, adhesives and pigment slurries. voir moins | |
| Proxel™ BZ Plus Preservative | Arxada | PROXEL™ BZ Plus Preservative is an antibacterial/anti-fungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous slurries such as titanium dioxide and clay, and tape joint compounds. | |
| Proxel™ BZ Preservative | Arxada | Proxel™ BZ Preservative is an antibacterial/antifungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous slurries such as titanium dioxide and clay, and tape joint compounds. | |
| Proxel™ CMC-E Preservative | Arxada | Proxel™ CMC-E Preservative is an antibacterial and antifungal preservative for aqueous industrial compositions such as adhesives, tackifiers, dispersed pigments, sealants, mastics, caulks, paints, coatings and other building materials. | |
| Proxel™ GXL Preservative | Arxada | Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, text...voir plus Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations, aqueous slurries, titanium dioxide slurries, tape joint compounds, leather processing solutions, and for the preservation of fresh animal hides and skins. voir moins | |
| Proxel™ TN Preservative | Arxada | Proxel™ TN Preservative is an efficient preservative for aqueous compositions such as latex emulsions, paint, oil in water emulsions, adhesives, tape joint compounds, and pigment dispersions. | |
| Proxel™ XL2 Preservative | Arxada | Proxel™XL2 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints and water-based adhesives. | |
| REAXIS® C114 | Reaxis Inc. | REAXIS® C114 is a versatile, liquid tin-based catalyst that is used in a number of applications including: esterifications, polyurethane coatings and resins. As well as aiding and improving the cure time of silicone resins and salines. | |
| REAXIS® C125 | Reaxis Inc. | REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can...voir plus REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can also be utilized either neat or as a mixture in alcohols. REAXIS® C125 is typically used at concentrations ranging from 0.01 - 0.20 wt%. voir moins | |
| REAXIS® C129LC | Reaxis Inc. | REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act ...voir plus REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act as a catalysis of lactone polymerization to form biodegradable polymers. REAXIS® C129LC can be utilized neat or as a mixture in alcohols. This product is typically used at concentrations ranging from 0.01 - 0.20 wt% at 80 - 240 °C. voir moins | |
| REAXIS® C154 | Reaxis Inc. | REAXIS® C154 is a white crystalline product that is used in the curing of thermoplastic elastomer. Made of Stannous Chloride Dihydrate, it is used in Sn/Pd activator formulations for POP. This product is also a preferred tin source for tin/nickel alloy pl...voir plus REAXIS® C154 is a white crystalline product that is used in the curing of thermoplastic elastomer. Made of Stannous Chloride Dihydrate, it is used in Sn/Pd activator formulations for POP. This product is also a preferred tin source for tin/nickel alloy plating and as a surface color modifier for art glass. voir moins | |
| REAXIS® C160 | Reaxis Inc. | REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activit...voir plus REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activity with minimal secondary reactions and colored by-products when compared to acid catalysts. REAXIS® C160 is non-corrosive and can be used at concentrations ranging from 0.01 - 0.2 wt% at 160 - 260°C. voir moins | |
| REAXIS® C162 | Reaxis Inc. | REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and sol...voir plus REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and solubility in polar solvents. It also finds use in Sn/Pd activator formulations for POP as well as a preferred tin source for tin/nickel alloy plating and as a surface color modifier for art glass. voir moins | |
| REAXIS® C188 | Reaxis Inc. | REAXIS® C188 is a free-flowing, dry black powder, of stable tin(II) oxide powder that has excellent catalytic properties for esterification reactions. This product is used at typical concentrations ranging from 0.01 - 0.20 wt% at 160 - 260°C. In addition...voir plus REAXIS® C188 is a free-flowing, dry black powder, of stable tin(II) oxide powder that has excellent catalytic properties for esterification reactions. This product is used at typical concentrations ranging from 0.01 - 0.20 wt% at 160 - 260°C. In addition, REAXIS® C188 is neutral and non-corrosive and can complete conversions with short reaction times due to its high catalytic activity. It has minimal secondary reactions and colored by-products when compared to other acid catalysts. And is very useful for oleochemical ester reactions. REAXIS® C188 is well suited for use in the metal finishing industry for tin and tin alloy plating processes. voir moins | |
| REAXIS® C208 | Reaxis Inc. | REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon reque...voir plus REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon request. voir moins | |
| REAXIS® C211 | Reaxis Inc. | REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extend...voir plus REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extended pot life and low color. voir moins |
