| Airase® 4500 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils,...voir plus Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils, hazardous air pollutants (HAPs), or alkyl phenol ethoxylates (APEs). voir moins | |
| Airase® 5700 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no adde...voir plus Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no added solvent, HAPs, or alkylphenol ethoxylates. This siloxane-based defoamer was developed for use in a wide range of water-based applications. Airase® 5700 Defoamer is formulated for incorporation in the let-down of a coating or ink. Airase® 5700 Defoamer can provide an excellent balance of effective defoaming and film compatibility. voir moins | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...voir plus Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. voir moins | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. voir moins | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Densil® C40 Antimicrobial | Arxada | Densil® C40 Antimicrobial is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| DYNOL™ 604 Surfactant | Evonik Operations GmbH, BL Interface & Performance | DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...voir plus DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. voir moins | |
| Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants ...voir plus Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more. voir moins | |
| Dynol™ 980 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offe...voir plus Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with low foam and excellent compatibility. The characteristics of Dynol™ 980 surfactant enable exceptional performance in waterborne wood coatings and overprint varnishes. This product can also provide good flow and leveling under diverse application conditions. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lonzamon™ AATMP | Arxada | Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers ...voir plus Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers a broad versatility for various application fields. At the active methylane group, Lonzamon™ AATMP has a reaction with melamine, aldehyde, isocyanates, and diazonium salts. At the carbonyl group, it has a chelation reaction and an enamine formation. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| Omacide® IPBC 100 | Arxada | Omacide® IPBC 100 Fungicide is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Omacide™ IPBC 20 TX Fungicide | Arxada | Omacide™ IPBC 20 TX Fungicide is a broad spectrum liquid fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Omacide® IPBC 30 Fungicide | Arxada | Omacide® IPBC 30 Fungicide imparts dry film protection against fungal growth when formulated in exterior paints and coatings, wood stains, adhesives, caulks, sealants, paper coatings, textiles, and plastics. | |
| Omacide® IPBC 40 Fungicide | Arxada | Omacide® IPBC 40 Fungicide is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. Omacide® IPBC 40 Fungicide also provides excellent fungal control when use...voir plus Omacide® IPBC 40 Fungicide is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. Omacide® IPBC 40 Fungicide also provides excellent fungal control when used in adhesives, caulks, and sealants. voir moins | |
| Polymer ST 48 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 81 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
| Propylene Carbonate | Linyi Lixing Chemical Co., Ltd. | Propylene Carbonate is a clear transparent liquid. This product finds application as an additive in paint strippers and as a setting agent in chemical grouting to control gel time. | |
| Proxel™ AQ Preservative | Arxada | Proxel™ AQ Preservative is a zero VOC, broad spectrum biocide for the preservation of industrial water-based products against spoilage from bacteria, yeasts and fungi. | |
| Proxel™ BC Preservative | Arxada | Proxel BC is an antibacterial/antifungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous mineral slurries, dyes & inks, household cleaning products, and building materials such as spackle and tape join...voir plus Proxel BC is an antibacterial/antifungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous mineral slurries, dyes & inks, household cleaning products, and building materials such as spackle and tape joint compound. voir moins | |
| Proxel™ BD20 Preservative | Arxada | Proxel™ BD20 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints, water based adhesives, casein and rosin dispersions, textile spin-finish solutions, pesticide formulatio...voir plus Proxel™ BD20 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints, water based adhesives, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations, aqueous slurries, titanium dioxide slurries, tape joint compounds, leather processing solutions, and for the preservation of fresh animal hides and skins. voir moins | |
| Proxel® BN Preservative | Arxada | Proxel® BN Preservative is a solvent-free, zero VOC, broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is effective in polymer emulsions, paints, adhesives and pigment sl...voir plus Proxel® BN Preservative is a solvent-free, zero VOC, broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is effective in polymer emulsions, paints, adhesives and pigment slurries. voir moins | |
| Proxel™ BZ Plus Preservative | Arxada | PROXEL™ BZ Plus Preservative is an antibacterial/anti-fungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous slurries such as titanium dioxide and clay, and tape joint compounds. | |
| Proxel™ BZ Preservative | Arxada | Proxel™ BZ Preservative is an antibacterial/antifungal preservative for aqueous compositions such as latex emulsions, paints, water based adhesives, aqueous slurries such as titanium dioxide and clay, and tape joint compounds. | |
| Proxel™ CMC-E Preservative | Arxada | Proxel™ CMC-E Preservative is an antibacterial and antifungal preservative for aqueous industrial compositions such as adhesives, tackifiers, dispersed pigments, sealants, mastics, caulks, paints, coatings and other building materials. | |
| Proxel™ GXL Preservative | Arxada | Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, text...voir plus Proxel™ GXL Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints including varnishes, lacquers, and stains, water based adhesives, inks, casein and rosin dispersions, textile spin-finish solutions, pesticide formulations, aqueous slurries, titanium dioxide slurries, tape joint compounds, leather processing solutions, and for the preservation of fresh animal hides and skins. voir moins | |
| Proxel™ TN Preservative | Arxada | Proxel™ TN Preservative is an efficient preservative for aqueous compositions such as latex emulsions, paint, oil in water emulsions, adhesives, tape joint compounds, and pigment dispersions. | |
| Proxel™ XL2 Preservative | Arxada | Proxel™XL2 Preservative is an efficient microbiostat preservative for aqueous compositions such as oil in water emulsions, latices, emulsion paints and water-based adhesives. | |
| Sodium Omadine® Fungicide | Arxada | Sodium Omadine® Fungicide is a highly active, broad-spectrum antimicrobial agent that, when used at recommended concentrations, can help to prevent and minimize problems associated with dry film fungal and algal growth. | |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing ...voir plus SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104A | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing...voir plus SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104BC | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in 2-Butoxyethanol. | |
| SURFYNOL® 104DPM | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Dipropylene Glycol Monomethyl Ether. | |
| SURFYNOL® 104E | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104H SURFACTANT | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 75% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104PA | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Isopropyl Alcohol. | |
| SURFYNOL® 104PG-50 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Propylene Glycol. | |
| SURFYNOL® 104S | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 46% active powder on Amorphous Silica. | |
| Surfynol® 107 L | Evonik Operations GmbH, BL Interface & Performance | Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid. | |
| SURFYNOL® 2502 | Evonik Operations GmbH, BL Interface & Performance | An ethoxylated/propoxylated acetylenic-based surfactant that provides specific performance benefits in a broad range of water-based systems. 100% active liquid. | |
| SURFYNOL® 420 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions both as a wetting agent and foam control agent. 100% active liquid with an HLB of 4. | |
| SURFYNOL® 440 | Evonik Operations GmbH, BL Interface & Performance | A nonfoaming, nonionic surfactant that is employed for substrate wetting. 100% active liquid with an HLB of 8. | |
| SURFYNOL® 465 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. It has a high cloud point for utilization in high-temperature systems. 100% active liquid with an HLB of 13. | |
| SURFYNOL® 485W | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions as a wetting agent and has slight emulsification properties. 75% active liquid with an HLB of 17. | |
| SURFYNOL® 82 | Evonik Operations GmbH, BL Interface & Performance | This is a 95% Dimethyl Octynediol surfactant. | |
| SURFYNOL® CT-131 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-131 is a solvent-free, low-foaming pigment grind aid designed for use in aqueous systems. | |
| SURFYNOL® CT-171 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-171 is a solvent-free anionic/nonionic grind aid designed to provide both effective pigment wetting and dispersing characteristics for many types of organic pigments. | |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...voir plus Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. voir moins | |
| SURFYNOL® DF-110L | Evonik Operations GmbH, BL Interface & Performance | Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide ...voir plus Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide variety of applications where foam prevention or foam elimination is nescessary without causing surface defects. voir moins | |
| Surfynol® DF-178 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for appl...voir plus Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for applications in water-borne coatings and graphic arts that demand both powerful defoaming and defect-free surfaces. voir moins | |
| Surfynol® DF-220 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid tha...voir plus Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations, including printing inks, coatings and adhesives. voir moins | |
| SURFYNOL® DF-37 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. 100% active liquid. | |
| SURFYNOL® DF-37 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. A unique additive designed to minimize web formation during latex glove and waterborne coating dipping processes. | |
| SURFYNOL® DF-58 | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. The product has strong foam control and deairation performance. 100% active liquid. | |
| SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. It has strong foam control and deairation performance. Developed for use in water-based coating and ink formulations where strong, rapid defoaming is required. 100% active liquid. | |
| SURFYNOL® DF-62 | Evonik Operations GmbH, BL Interface & Performance | An ether-modified polysiloxane-based defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time. 100% active liquid. | |
| SURFYNOL® DF-62 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | Ether-modified, silicone defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time in a variety of waterborne formulations. Useful when long-term defoamer efficacy is needed. 100% active liquid. | |
| SURFYNOL® DF-66 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A liquid, acetylenic-modified polysiloxane-based emulsion defoamer which provides excellent balance of initial knockdown and sustained defoaming with no detrimental effects. Designed for use in aqueous ink and coating systems. 46% active liquid. | |
| SURFYNOL® DF-695 | Evonik Operations GmbH, BL Interface & Performance | A silicone emulsion defoamer, which provides initial and sustained defoaming performance in water-based formulations. 100% active liquid. | |
| SURFYNOL® DF-695 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based emulsion defoamer designed for use in aqueous ink systems. It is recommended for use in grinding and dispersion as well as letdown applications. 100% active liquid. | |
| SURFYNOL® MD-600S | Evonik Operations GmbH, BL Interface & Performance | This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast...voir plus This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast escape of air entrapped while incorporating water and during mixing. voir moins | |
| Surfynol® MD20 | Evonik Operations GmbH, BL Interface & Performance | Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minim...voir plus Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Additional advantages of Surfynol® MD20 include, long-lasting defoamer efficacy, ease of incorporation and good compatibility without separation, synergestic with typical wetting agents, eliminates microfoam, wide compounding latitude, solvent-free and temperature and pH stable (pH 1-13). voir moins | |
| SURFYNOL® PSA-336 | Evonik Operations GmbH, BL Interface & Performance | A powerful solvent-free wetting agent with moderate foaming tendencies. | |
| SURFYNOL® SE | Evonik Operations GmbH, BL Interface & Performance | A nonionic defoaming surfactant which can act as a highly effective wetting agent, defoamer and viscosity stabilizer and often performs more than one of these functions in combination. 80% active liquid with an HLB of 4-5. | |
| SURFYNOL® SE-F | Evonik Operations GmbH, BL Interface & Performance | A nonionic self-emulsifiable surfactant that will reduce surface tension and control foam. 80% active liquid with an HLB of 4-5. | |
| TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
| TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 170 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties,...voir plus TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 251 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 251 is a hybrid polymer with a modified backbone that contains hydrophilic segments. Formulations with TEGOPAC® Bond 251 are suitable to replace flexible PUR adhesives and sealants. | |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® Seal 100 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also ...voir plus TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also recommended for use in sealant and adhesive formulations where vibration and sound dampening is an issue. voir moins | |
| ZetaSperse® 170 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring grou...voir plus ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring group that has been found to have particularly strong affinity for carbon black pigments, titanium dioxide pigments, and other pigments and particles with acidic surface groups. ZetaSperse® 170 dispersant is most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins where it can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. voir moins | |
| ZetaSperse® 179 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, c...voir plus ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, carbon black, and inorganic pigments as well as fillers and functional solid chemicals. Ideal applications include resinated dispersions, colorants and pigment dispersions, inks and graphic arts, architectural and industrial coatings, and industrial processes. voir moins |
