| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...voir plus 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. voir moins | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 12-Hydroxystearic Acid | Alnor Oil Company, Inc. | 12-Hydroxystearic Acid is a wax like compound made from the fatty acids of hydrogenated castor oil. This product is commonly used in coatings, cosmetics, detergents, leather finishings, liquid soaps, personal care items, and surfactants. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,3-Dioxolane | BASF SE, Intermediates Division | 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxi...voir plus 1,3-Dioxolane is a powerful aprotic solvent for use in formulations, in production processes, or even as a reactant. Dioxolane can be used in pressure sensitive adhesives and sealants, as well as for dissolving polar polymers, including polyesters, epoxies, urethanes, and polyacrylamide. It can also be used as a solvent in polyester film seaming. voir moins | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...voir plus 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. voir moins | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...voir plus 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...voir plus 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. voir moins | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...voir plus 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. voir moins | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...voir plus 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. voir moins | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...voir plus 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. voir moins | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...voir plus 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| 2-Ethylimidazole | BASF SE, Intermediates Division | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2-Octanol (Capryl Alcohol) | Alnor Oil Company, Inc. | 2-Octanol (Capryl Alcohol) is an 8-carbon secondary alcohol, in the form of a colorless transparent liquid, derived from castor oil. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lub...voir plus 2-Octanol (Capryl Alcohol) is an 8-carbon secondary alcohol, in the form of a colorless transparent liquid, derived from castor oil. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| 2-Octanone (Methyl Hexyl Ketone) | Alnor Oil Company, Inc. | 2-Octanone (Methyl Hexyl Ketone) is an 8 carbon ketone, in the form of a colorless transparent liquid, derived from castor oil. It is most commonly used in perfume and as a flavor intermediate. This product can be used in adhesives, candles, coatings, cos...voir plus 2-Octanone (Methyl Hexyl Ketone) is an 8 carbon ketone, in the form of a colorless transparent liquid, derived from castor oil. It is most commonly used in perfume and as a flavor intermediate. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| 2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD | BASF SE, Intermediates Division | 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks. | |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...voir plus 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. voir moins | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...voir plus 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. voir moins | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...voir plus 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. voir moins | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...voir plus 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. voir moins | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...voir plus 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. voir moins | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...voir plus 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...voir plus 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. voir moins | |
| 76° Edible Coconut Oil | Alnor Oil Company, Inc. | 76° Edible Coconut Oil is a bland, odorless, white to pale yelow, solid to semi-solid, lard-like fat derived from the kernel of the fruit of the coconut palm Cocos nucifera. This product is commonly used in confectionery, detergents, ice cream, coatings,...voir plus 76° Edible Coconut Oil is a bland, odorless, white to pale yelow, solid to semi-solid, lard-like fat derived from the kernel of the fruit of the coconut palm Cocos nucifera. This product is commonly used in confectionery, detergents, ice cream, coatings, margarine, popping oils, shampoos, soaps, spray oils, and surfactants. voir moins | |
| ALNOR POLY RA | Alnor Oil Company, Inc. | ALNOR POLY RA (Polymerized Ricinoleic Acid) is a viscous amber liquid. It is ideal for use in a wide range of applications and industries. | |
| Baxxodur™ EC 201 | BASF SE, Intermediates Division | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...voir plus Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. voir moins | |
| Baxxodur™ EC 301 | BASF SE, Intermediates Division | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF SE, Intermediates Division | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Baxxodur™ EC 110 | BASF SE, Intermediates Division | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF SE, Intermediates Division | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 252 | BASF SE, Intermediates Division | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Benzylamine | BASF SE, Intermediates Division | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| Boiled Linseed Oil | Alnor Oil Company, Inc. | Boiled Linseed Oil is an oil derived from the seeds of flax plants and comprised of palmitic, stearic, oleic, alpha-linoleic, and omega 3 fatty acids, with added dryers to speed up drying time. This product is commonly used in appliance finishes, paints, ...voir plus Boiled Linseed Oil is an oil derived from the seeds of flax plants and comprised of palmitic, stearic, oleic, alpha-linoleic, and omega 3 fatty acids, with added dryers to speed up drying time. This product is commonly used in appliance finishes, paints, circuit board coatings, linoleum finishes, enamel coatings, furniture polishes, plasticizers, printing inks, sealants, stains, varnishes, and waterproofing coatings. voir moins | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...voir plus Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...voir plus Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate voir moins | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...voir plus Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. voir moins | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...voir plus Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. voir moins | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...voir plus Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates voir moins | |
| Castor Oil | Alnor Oil Company, Inc. | Castor Oil is a clear viscous liquid derived from the seed of the castor plant, with a slight characteristic odor. It is a technical grade castor oil intended for industrial applications. It can be used in a wide range of applications. | |
| Castor Oil Ethoxylates - PEG-25-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-25-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber...voir plus Castor Oil Ethoxylates - PEG-25-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Castor Oil Ethoxylates - PEG-40-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-40-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber...voir plus Castor Oil Ethoxylates - PEG-40-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Castor Oil Ethoxylates - PEG-60-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-60-CO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, ...voir plus Castor Oil Ethoxylates - PEG-60-CO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Castor Oil Ethoxylates - PEG-7-CO | Alnor Oil Company, Inc. | Castor Oil Ethoxylates - PEG-7-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber,...voir plus Castor Oil Ethoxylates - PEG-7-CO is a yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Castor Oil USP | Alnor Oil Company, Inc. | Castor Oil USP is a clear viscous liquid derived from the seed of the castor plant. This product is ideal for use in pharmaceuticals, adhesives, cosmetics, inks, lubricants, soaps, plastics, and textiles. | |
| Chinese Tung Oil | Alnor Oil Company, Inc. | Chinese Tung Oil is a clear transparent oil derived from the tung nut and compromised of palmitic, oleic, linoleic, and alpha-eleostearic acids. This product is commonly used in appliance finishes, paints, circuit board coatings, linoleum finishes, enamel...voir plus Chinese Tung Oil is a clear transparent oil derived from the tung nut and compromised of palmitic, oleic, linoleic, and alpha-eleostearic acids. This product is commonly used in appliance finishes, paints, circuit board coatings, linoleum finishes, enamel coatings, furniture polishes, plasticizers, printing inks, sealants, stains, varnishes, and waterproofing coatings. voir moins | |
| Coconut Fatty Acid | Alnor Oil Company, Inc. | Coconut Fatty Acid has a high Lauric acid (C12) content and about 5-8% Caprylic acid. It can be used in a wide range of applications and industries. | |
| Cold Pressed Castor Oil | Alnor Oil Company, Inc. | Cold Pressed Castor Oil is a clear and slight yellow viscous hygroscopic liquid with a very slight characteristic odor. It can be used in many applications and industries. | |
| Crude Palm Oil | Alnor Oil Company, Inc. | Crude Palm Oil is the oil obtained from the fleshy portion of the fruit from varieties of the palm Elaeis guineensis. It is ideal for use in Detergents, Emulsifiers, and Soaps. | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...voir plus Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. voir moins | |
| Dehydrated Castor Fatty Acid - H Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...voir plus Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. voir moins | |
| Dehydrated Castor Fatty Acid - L Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...voir plus Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. voir moins | |
| Dehydrated Castor Oil | Alnor Oil Company, Inc. | Dehydrated Castor Oil is a clear, non-yellowing, drying oil formed by removing the OH molecule group from the componds in castor oil. It displays good flexibility, toughness, and adhesion. This product is commonly used in appliance finishes, paints, circu...voir plus Dehydrated Castor Oil is a clear, non-yellowing, drying oil formed by removing the OH molecule group from the componds in castor oil. It displays good flexibility, toughness, and adhesion. This product is commonly used in appliance finishes, paints, circuit board coatings, linoleum finishes, enamel coatings, furniture polishes, plasticizers, printing inks, sealants, stains, varnishes, and waterproofing coatings. voir moins | |
| Densil® C40 Antimicrobial | Arxada | Densil® C40 Antimicrobial is a broad spectrum fungicide that can be used to provide dry film protection when formulated in interior and exterior paints, coatings, and wood stains. | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...voir plus Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). voir moins | |
| Diethanolamine, pure | BASF SE, Intermediates Division | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...voir plus Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). voir moins | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...voir plus Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . voir moins | |
| Diisopropanolamine | BASF SE, Intermediates Division | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...voir plus Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. voir moins | |
| Edible Olive Oil | Alnor Oil Company, Inc. | Edible Olive Oil is a fixed oil, in the form of a yellow-green, clear, and brilliant liquid, obtained from the ripe fruit of Olea europaea Linne. This product can be used in adhesives, agricultural pesticides, dressings, cosmetics, cooking oils, soaps, in...voir plus Edible Olive Oil is a fixed oil, in the form of a yellow-green, clear, and brilliant liquid, obtained from the ripe fruit of Olea europaea Linne. This product can be used in adhesives, agricultural pesticides, dressings, cosmetics, cooking oils, soaps, inks, lubricants, margarine, paints, pharmaceuticals, and varnishes. voir moins | |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...voir plus Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. voir moins | |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...voir plus Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. voir moins | |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| Extra Virgin Coconut Oil | Alnor Oil Company, Inc. | Extra Virgin Coconut Oil is derived from the meat of coconuts. It is cold-pressed and filtered. It is ideal for use in a wide range of applications. | |
| Flaxseed Oil | Alnor Oil Company, Inc. | Flaxseed Oil is a light yellow, odorless liquid with a pleasant nutty flavor, obtained from Linum Usitatissimum. It features high alpha-linolenic acid content. This product can be used in adhesives, agricultural pesticides, dressings, cosmetics, cooking o...voir plus Flaxseed Oil is a light yellow, odorless liquid with a pleasant nutty flavor, obtained from Linum Usitatissimum. It features high alpha-linolenic acid content. This product can be used in adhesives, agricultural pesticides, dressings, cosmetics, cooking oils, soaps, inks, lubricants, margarine, paints, pharmaceuticals, and varnishes. voir moins | |
| Formic acid | BASF SE, Intermediates Division | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| Hydrogenated Castor Oil | Alnor Oil Company, Inc. | Hydrogenated Castor Oil is a wax-like substance, in the form of white, brittle flakes, produced by infusing castor oil with hydrogen via a nickle catalyst. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic flui...voir plus Hydrogenated Castor Oil is a wax-like substance, in the form of white, brittle flakes, produced by infusing castor oil with hydrogen via a nickle catalyst. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| Hydrogenated Castor Oil Ethoxylates - PEG-25-HCO | Alnor Oil Company, Inc. | Hydrogenated Castor Oil Ethoxylates - PEG-25-HCO is a white to yellow pasty liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmac...voir plus Hydrogenated Castor Oil Ethoxylates - PEG-25-HCO is a white to yellow pasty liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Hydrogenated Castor Oil Ethoxylates - PEG-40-HCO | Alnor Oil Company, Inc. | Hydrogenated Castor Oil Ethoxylates - PEG-40-HCO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceutica...voir plus Hydrogenated Castor Oil Ethoxylates - PEG-40-HCO is a white to yellow liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Hydrogenated Castor Oil Ethoxylates - PEG-60-HCO | Alnor Oil Company, Inc. | Hydrogenated Castor Oil Ethoxylates - PEG-60-HCO is a white to yellow pasty liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmac...voir plus Hydrogenated Castor Oil Ethoxylates - PEG-60-HCO is a white to yellow pasty liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Hydrogenated Castor Oil Ethoxylates - PEG-7-HCO | Alnor Oil Company, Inc. | Hydrogenated Castor Oil Ethoxylates - PEG-7-HCO is a white to yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuti...voir plus Hydrogenated Castor Oil Ethoxylates - PEG-7-HCO is a white to yellowish liquid with a faint odor. It is ideal for use in a wide range of applications in many industries, including Adhesives, Cosmetics, Greases, Inks, Lubricants, Personal care, Pharmaceuticals, Plastics, Rubber, Soaps, Textiles, and Urethanes. voir moins | |
| Hydrogenated Castor Oil MP-70 | Alnor Oil Company, Inc. | Hydrogenated Castor Oil MP-70 is a wax-like substance, in the form of white, brittle flakes, produced by infusing castor oil with hydrogen via a nickle catalyst. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydrauli...voir plus Hydrogenated Castor Oil MP-70 is a wax-like substance, in the form of white, brittle flakes, produced by infusing castor oil with hydrogen via a nickle catalyst. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| Hydrogenated Castor Oil MP-80 | Alnor Oil Company, Inc. | Hydrogenated Castor Oil MP-80 is a wax-like substance, in the form of white, brittle flakes, produced by infusing castor oil with hydrogen via a nickle catalyst. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydrauli...voir plus Hydrogenated Castor Oil MP-80 is a wax-like substance, in the form of white, brittle flakes, produced by infusing castor oil with hydrogen via a nickle catalyst. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF SE, Intermediates Division | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...voir plus Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating voir moins | |
| Imidazole | BASF SE, Intermediates Division | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...voir plus Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. voir moins | |
| Iso-Butyl vinyl ether, IBVE | BASF SE, Intermediates Division | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...voir plus Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. voir moins | |
| Isophorone diamine | BASF SE, Intermediates Division | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...voir plus Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. voir moins | |
| Jagroplast-BR | Alnor Oil Company, Inc. | Jagroplast-BR is an ester plasticizer, in the form of a yellowish liquid, derived from castor oil and providing low temperature flexibility and low viscosity. This product can be used in adhesives, candles, coatings, cosmetics, soaps, hydraulic fluids, in...voir plus Jagroplast-BR is an ester plasticizer, in the form of a yellowish liquid, derived from castor oil and providing low temperature flexibility and low viscosity. This product can be used in adhesives, candles, coatings, cosmetics, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| Jagropol-500 | Alnor Oil Company, Inc. | Jagropol-500 is a solventless medium viscosity polyol, in the form of a yellow viscous liquid, derived from castor oil. It has both ether and ester groups and a hydroxyl functionality of ~2. This product can be used in adhesives, candles, coatings, cosmet...voir plus Jagropol-500 is a solventless medium viscosity polyol, in the form of a yellow viscous liquid, derived from castor oil. It has both ether and ester groups and a hydroxyl functionality of ~2. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| Jagrowax-140 | Alnor Oil Company, Inc. | Jagrowax-140 is a synthetic high melting and non-corrosive wax, in the form of cream colored flakes or powder, derived from castor oil. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, ...voir plus Jagrowax-140 is a synthetic high melting and non-corrosive wax, in the form of cream colored flakes or powder, derived from castor oil. This product can be used in adhesives, candles, coatings, cosmetics, greases, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| Lonzamon™ AATMP | Arxada | Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers ...voir plus Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers a broad versatility for various application fields. At the active methylane group, Lonzamon™ AATMP has a reaction with melamine, aldehyde, isocyanates, and diazonium salts. At the carbonyl group, it has a chelation reaction and an enamine formation. voir moins | |
| Low Moisture Castor Oil | Alnor Oil Company, Inc. | Low Moisture Castor Oil is a clear viscous liquid produced by removing the moisture from castor oil. It is ideal for use in a wide range of applications. | |
| Low Moisture Castor Oil | Alnor Oil Company, Inc. | Low Moisture Castor Oil is a clear viscous liquid of the following types shall be the triglyceride oil derived from the seed of the castor plant, genus Ricinus communis.. It is ideal for use in many industries and applications. | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| Mass Balance Refined Palm Oil | Alnor Oil Company, Inc. | Mass Balance Refined Palm Oil is the oil obtained from the fleshy portion of the fruit from varieties of the palm Elaeis guineensis which has been refined, bleached and deodorized. It is ideal for use in Detergents, Emulsifiers, and soaps. |
